Chopra, A.K. Goel, R.K. (2002). A modal pushover analysis procedure for estimating seismic demands for buildings. Earthquake Engineering and Structural Dynamics, 31, 561-582.
 Chopra, A.K. Goel, R.K. (2004). Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands. Earthquake Spectra, 20, 757-778.
 Sasaki, K.K. Freeman, S.A. Paret, T.F. (1998). Multi-mode pushover procedure (MMP) - a method to identify the effects of higher modes in a pushover analysis. In: Proceedings of the 6th U.S. National Conference on Earthquake Engineering, Seattle, Washington.
 Moghadam, A.S. (2002). A pushover procedure for tall buildings. In: Proceedings of the12th European Conference on Earthquake Engineering, Elsevier Science Ltd., London, England.
 Jan, T.S. Liu, M.W. Kao, Y.C. (2004). An upper-bound pushover analysis procedure for estimating the seismic demands of high-rise buildings. Engineering Structures, 26, 117-128.
 Rofooei, F.R. Attari, N.K. Rasekh, A. Shodja, A.H. (2007). Adaptive pushover analysis. Asian Journal of Civil Engineering, 8, 343-358.
 Kadid, A. Boumrkik, A. (2008). Pushover analysis of reinforced concrete frame structures. Asian Journal of Civil Engineering, 9, 75-83.
 Mahdi, T. Soltan Gharaie, V. (2011). Plan irregular rc frames: comparison of pushover with non-linear dynamic analysis. Asian Journal of Civil Engineering, 12, 679-690.
 Antoniou, S. Pinho, R. (2004). Advantages and limitations of adaptive and non-adaptive force-based pushover procedures. Journal of Earthquake Engineering, 8, 497–522.
 Antoniou, S. Pinho, R. (2004). Development and verification of a displacement-based adaptive pushover procedure. Journal of Earthquake Engineering, 8, 643–661.
 Poursha, M. Khoshnoudian, F. Moghadam, A.S. (2009). A consecutive modal pushover procedure for estimating the seismic demands of tall buildings. Engineering Structures, 31, 591–599.
 Poursha, M. Khoshnoudian, F. Moghadam, A.S. (2011). A consecutive modal pushover procedure for non-linear static analysis of one-way unsymmetric-plan tall building structures. Engineering Structures, 33, 2417–2434.
 Vafaee, M.H. Saffari, H. (2017). A modal shear-based pushover procedure for estimating the seismic demands of tall building structures. Soil Dynamics and Earthquake Engineering, 92, 95-108.
 Stafford Smith, B. Kuster, M. Hoenderkamp, J.C. (1984). Generalized method for estimating drift in high-rise structures. Journal of Structural Engineering (ASCE), 110(7), 1549-1562.
 Eroglu, T. and Akkar, S. (2011). Lateral stiffness estimation in frames and its implementation to continuum models for linear and nonlinear static analysis, Bulletin of Earthquake Engineering, 9, 1097-1114.
 Khalili, S. Meshkat-Dini, A. Keyvani, J. (2016). Nonlinear dynamic response of hybrid rigid frame skeletons in near fault. In: 4th National Congress on Civil Engineering, Architecture and Urban Management, Shahid Beheshti University, Tehran, Iran. (In Persian)
 Khalili, S. Meshkat-Dini, A. Keyvani, J. (2017). Seismic performance of high rise hybrid structures with moment frame configuration. Journal of Structural and Construction Engineering,
4 (Special Issue 1
), 88-97. (In Persian)
 Halis Gunel, M. and Emre Ilgin, H. (2007). A proposal for the classification of structural systems of tall buildings. Building and Environment, 42, 2267-2675.
 Miranda, E. (1999). Approximate seismic lateral deformation demands in multistory buildings. Journal of Structural Engineering, 125(4), 417-445.
 Miranda, E. Reyes, C.J. (2002). Approximate lateral drift demands in multistory buildings with nonuniform stiffness. Journal of Structural Engineering, 128(7), 840-849.
 Road, Housing and Urban Development Research Center, (2014). Iranian Standard No. 2800. Iranian code of practice for seismic resistant design of buildings, Tehran, Iran.
 Road, Housing and Urban Development Research Center, (2014). Iranian national building code: Design Loads for Buildings – Division 6, Tehran, Iran.
 Road, Housing and Urban Development Research Center, (2014). Iranian national building code: Design and Construction of Steel Structures – Division 10, Tehran, Iran.
 FEMA 356 (2000). Pre-Standard and Commentary for the seismic Rehabilitation of Buildings. Washington D.C. Federal Emergency Management Agency, USA.
 Computers and Structures, Inc. (2000). Analysis reference manual for Sap2000. Berkeley-California, USA.
 Alonso-Rodríguez, A. and Miranda, E. (2015). Assessment of building behavior under near-fault pulse-like ground motions through simplified models. Soil Dynamics and Earthquake Engineering, 79, 47-58.
 Alavi, B. Krawinkler, H. (2004). Behavior of moment resisting frame structures subjected to near fault ground motions. Earthquake Engineering and Structural Dynamics, 33, 687-706.
 Sucuoglu, H. Nurtug, A. (1995). Earthquake ground motion characteristics and seismic energy dissipation. Earthquake Engineering and Structural Dynamics, 24, 1195-1213.
 Alavi B, Krawinkler H. (2000). Consideration of near-fault ground motion effects in seismic design. In: 12th World Conference on Earthquake Engineering (12WCEE), New Zealand Society for Earthquake Engineering, Auckland, New Zeland.
 Azhdarifar, M. Meshkat-Dini, A. Sarvghad-Moghadam, A. (2015). Study on the seismic response parameters of steel medium-height buildings with framed-tube skeleton under near-fault records. Electronic Journal of Structural Engineering (EJSE), 15, 70-87.
 Malhotra, P.K. (1999). Response of buildings to near-field pulse-like ground motions. Earthquake Engineering and Structural Dynamics, 28, 1309-1326.
 Anderson, J.C. Gurfinkel, G. (1975). Seismic behaviour of framed tubes. Earthquake Engineering and Structural Dynamics, 28, 145-162.