. Whittaker A.S., Uang C.M., Bertero V.V., (1989). Experimental behavior of dual steel system, Journal of Structural Engineering (ASCE), 115(1), 183-200.
. Gillie J.L., Rodriguez-Marek A., McDaniel C., (2010). Strength reduction factors for near-fault forward-directivity ground motions, Engineering Structures, 32, 273-285.
. Hatzigeorgiou G.D., (2010). Behavior factors for nonlinear structures subjected to multiple near-fault earthquakes, Computers and Structures, 88, 309-321.
. Sehhati, R., Rodriguez-Marek, A., ElGawady, M., Cofer, W.F., (2011). Effects of near-fault ground motions and equivalent pulses on multi-story structures, Engineering Structures, 33(3), 767-779.
. Rodríguez, A.A., Miranda, E., (2015). Assessment of building behavior under near-fault pulse-like ground motions through simplified models, Soil Dynamics and Earthquake Engineering, 79, 47-58.
. Narayan S., Shrimali M.K., Bharti S.D., Datta T.K., (2018). Collapse of damaged steel building frames because of earthquakes, Journal of Performance of Constructed Facilities (ASCE), DOI: 10.1061/(ASCE)CF.1943-5509.0001125
. Kildashti K., Mirghaderi R., (2016). A case study on the assessment of response modification coefficient and earthquake-induced collapse potential of a high-rise setback tower, Structure and Infrastructure Engineering (Maintenance, Management, Life-Cycle Design and Performance), 2016, DOI: 10.1080/15732479.2016.1258428
. Gaur H., Goliya R.K., (2015). Mitigating shear lag in tall building. International Journal of Advanced Structural Engineering, 7, 269-279.
. Movahed H., Meshkat-Dini A., Tehranizadeh M., (2014). Seismic evaluation of steel special moment resisting frames affected by pulse type ground motions. Asian Journal of Civil Engineering (BHRC), 15, 575-585.
. Hayden C.P., Bray J.D., Abrahamson N.A., (2014). Selection of near-fault pulse motions, Journal of Geotechnical and Geo-Environmental Engineering (ASCE). 140(7), DOI: 10.1061/(ASCE)GT.1943-5606.0001129.
. Dabaghi M., Der Kiureghian A., (2018). Simulation of orthogonal horizontal components of near-fault ground motion for specified earthquake source and site characteristics. Earthquake Engineering and Structural Dynamics, 47, 1369-1393.
. Gioncu V., Mosoarca M., Anastasiadis A., (2014). Local ductility of steel elements under near-field earthquake loading. Journal of Constructional Steel Research, 101, 33-52.
. Durucan C., Durucan A.R., (2016). Ap/Vp specific inelastic displacement ratio for the seismic response estimation of sdof structures subjected to sequential near-fault pulse type ground motion record, Soil Dynamics and Earthquake Engineering (Elsevier), 89, 163-170.
. Balendra T., Yu C.H., Lee F.L., (2001). An economical structural system for wind and earthquake loads. Engineering Structures, 23, 491-501.
. Tajmir-Riahi H., Amouzegar H., Saheb-Fosoul S.A., (2015). Comparative study of seismic structural response to real and spectrum matched ground motions, Scientia Iranica, Sharif University of Technology, 22, 92-106.
. Ghahari F. and Khaloo R. (2013). Considering rupture directivity effects which structures should be named long-period buildings. The Structural Design of Tall and Special Buildings, 22, 165-178.
. Baker, J.W. (2007). Quantitative classification of near-fault ground motions using wavelet analysis. Bulletin of the Seismological Society of America (BSSA), 5, 1486-1501.
. Bradley B.A., Pettinga D., Baker J.W., Fraser J., (2017). Guidance on the utilization of earthquake-induced ground motion simulations in engineering practice, Earthquake Spectra (EERI), 33(3), https://doi.org/10.1193/120216EQS219EP
. PEER Ground Motion Database, California, http://peer.berkeley.edu
. Iranian National Building Code. (2014). Design Loads for Buildings - Issue 6, Tehran, Iran: Bureau of National Building Regulations.
. Iranian National Building Code. (2014). Steel Structures - Issue 10, Tehran, Iran: Bureau of National Building Regulations.
. Federal Energy Management Agency (FEMA). (1998). Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356, Washington D.C., Create Space Independent Publication.
. Federal Energy Management Agency (FEMA). (2005). "Improvement of Nonlinear Static Seismic Analysis Procedures", FEMA 440, Washington D.C., Applied Technology Council (ATC-55 Project) .
. Iranian Standard No. 2800. (2014). Iranian code of practice for seismic resistant design of buildings, fourth edition, Road, Housing and Urban Development Research Center, Tehran, Iran.
. Shirvani, V. (2018). "The effect of strength reduction factor on seismic demand of moment resisting frames under impulsive strong ground motions", Master of Science Thesis, Kharazmi University, Faculty of Engineering.
. SAP 2000, Structural Analysis Program (CSI), Computer and Structures, Berkeley, California.
. Ferraioli M., Lavino A., Mandara A. (2012). Behavior factor for seismic design of moment-resisting steel frames. The 15th World Conference on Earthquake Engineering (15WCEE), Lisbon, Portugal.
. Miranda E., and Bertero V.V. (1994). Evaluation of strength reduction factors for earthquake resistant design. Earthquake Spectra, 10(2), 357-379.
. Newmark N.M., and Hall W.J. (1973). Seismic Design Criteria for Nuclear Reactor Facilities, Building Practices for Disaster Mitigation, Washington (D.C.), National Bureau of Standards, 209-236.
. Lai P., and Biggs J.M. (1980). Inelastic response spectra for aseismic building design. Journal of Structural Engineering (ASCE), 106(6), 1296-1310.
. Riddell R., Hidalgo P., and Cruz E. (1989). Response modification factors for earthquake resistant design of short period structures, Earthquake Spectra (EERI), 5(3), 571-590.
. Hidalgo P.A., and Arias A. (1990), New Chilean Code Earthquake –Resistant Design of Building. The 4th U.S. National Conference of Earthquake Engineering, Earthquake Engineering Research Institute, Palm Springs, California, 927-936.
. Miranda E. (1993). Site dependent strength reduction factors, Journal of Structural Engineering (ASCE), 119(12), 3503-3519.
. Uang C.M. (1991). Establishing R and Cd factors for building seismic provisions, Journal of Structural Engineering (ASCE), 117(1), 19-28.
. Massumi A., Tasnimi A.A. and Saatcioglu M. (2004), Prediction of seismic over-strength of concrete moment resisting frames using incremental static and dynamic analyses. The 13th World Conference on Earthquake Engineering (13WCEE), Vancouver, B.C., Canada.