Noori, M. and Mansoori, R. (2011). Design of Storage Tanks. Tehran: Andishe sara, 15-30.
 Mendez, J. (2001). Evaluation of Steel Tanks due to Hurricanes. Engineering structures, Vol (20), 732-760.
 Timoshenko, S. and Gere, J. (1988). Theory of Elastie Stability. NewYork: McGraw-Hill Book, 620-630.
 Resinger, F. and Griener, R. (1998). Buckling of Wind Loaded Cylindrical Shells. Buckling of shells, Vol (1), 305-331.
 Chryssanthapouls, M. (1998). Probabilistic Buckling Analysis of Plates and Shells. Thin-walled structures, Vol (30), 135-157.
 Walker, P. (1998). Buckling of Cylinders with Local Loads Normal to the Shell. Thin-walled structures, Vol (30), 160-169.
 API650, (2007). Welded Steel Tanks for Oil Storage. Washington D.C.:American petroleum Institute,
 Godoy, L. and Mendez, J. (2001). Buckling of Aboveground Storage Tank with Conical Roof. Thin- walled structure, Vol (39), 661-668
 Jamal, M. (2002). A Semi-Analytical Buckling Analysis of Imperfect Cylindrical Shells under Axial Compression, International journal of solids and structures, Vol (40), 1311-1327.
 Ahari, M. and Eshghi, S. (2003). Investigate the Seismic Vulnerability of Oil Steel Tanks. In: 4th International Earthquack Confrence. Tehran.
 Koller, M. and Malhotra, P. (2004). Seismic Evaluation of Unanchored Cylindrical Tank. In: 13th World conference on earthquake engineering.Vancouver.
 Rotter, J. (2006). Elephant’s Foot Buckling in Pressurized Cylindrical Shells, stahlbau, Vol. (75), 742-747.
 Hossainzade, N. and Goodarzi, A. (2008). Evaluation of Seismic Failure Mode and Strengthening Methods of Unanchored Cylindrical Steel Liquid Tanks in an Oil Complex, Journal of Steel and structure, Vol (3), 26-35.
 Moghaddam, H. and Sangi, S. (2011). Elephant’s Foot Buckling of Cylindrical Steel Storage Tanks
Subjected to Earthquake Excitation. 6th National Congress on Civil Engineering, Semnan.
 Hosseinzade, N. (2012). Comparison of API650-2008 Provisions FEM Analyses for Seismic Assessment of Existing Steel Oil Storage Tanks, Loss prevention, Vol (26), 666-675.
 Kazem, H. (2012). Seismic Vulnerability of Cylindrical Steel Tanks using Static and Dynamic Analysis Fluid Wave Height Control. In: 15th world conference on earthquak engineering. Lisbon.
 Maheri, M. (2012). The Effects of Longterm Uniform Corrosion of the Buckling of Ground Based Steel tanks Under Seismic Loading, Thin- walled structure, Vol (62), 1-9.
 Niloufari, A. (2012). Experimental Investigation on the Effect of Geometric Imperfections on the Buckling and Post-buckling Behavior of Steel Tanks under Hydrostatic Pressure. Thin- walled structure, Vol (74), 1-10.
 Aghabarati, H. (2013). Evaluation of Nonlinear Buckling under Seismic Effect with Method of Ansys’s Finite Element. In: 4th National Steel and structure conference.Tehran.
 Zhao, Y. and Lin, Y. (2013). Buckling of Cylindrical Open-topped Steel Tanks Under Wind Load, Thin- walled structure, Vol (79), 83-94.
 Abaqus documentation. (2013). Example Problems Manual Vol.II. simulia.
 Streeter, V. (2002). Fluid Mechanics. Tehran:Noor pardazan, 4-20.
 Kalani, L and Navaie Nia, B. (2008). Analysis of Concrete Air Tanks with Regard to Water and Structure interaction. In: 4th National Civil Engineering Congress. Tehran: Tehran University.
 Ministry of Petroleum. (2010). Iranian Seismic Design Code for Oil Industries. Tehran: Engineering Deputy,
 Road, Housing and Urban Development Research Center. (2010). Iranian code of Practice for Seismic Resistant Design of Buildings 3th Edition. Tehran: Road, Housing and Urban Development Research Center, 37-41.