مهندسی سازه و ساخت

مهندسی سازه و ساخت

کاربرد روش بست و بند در تحلیل برشی تیرهای عمیق مسلح با میلگردهای‎ کامپوزیتی:‏‎ ‎‎توسعه ‏مدل و تأیید آزمایشگاهی

نوع مقاله : علمی - پژوهشی

نویسندگان
1 پژوهشگر پسادکترا، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
2 دانش آموخته دکتری، دانشکده مهندسی عمران، دانشگاه صنعتی شریف، تهران، ایران.
3 دانشیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
10.22065/jsce.2026.591552.4074
چکیده
تیرهای عمیق بتنی با نسبت دهانه برشی به عمق مؤثر کوچک، به‌دلیل مکانیزم انتقال بار عملکرد قوسی و رفتار برشی غالب، از ‏اعضای سازه‌ای چالش‌برانگیز محسوب می‌شوند. با توجه به نگرانی‌های روزافزون در خصوص خوردگی فولاد، استفاده از آرماتورهای پلیمر مسلح ‏به الیاف شیشه‎ ‎به‌عنوان جایگزینی مناسب مطرح شده است. این میلگردها به نسبت میلگردهای فولادی، دارای مقاومت کششی بالاتر و مدول الاستیسیته‌ی کمتر و نیز رفتار الاستیک خطی تا نقطه‌ی شکست، هستند. در این پژوهش، رفتار برشی تیرهای عمیق مسلح به‎ ‎از طریق ‏یک برنامه آزمایشگاهی شامل شش نمونه تمام‌مقیاس با متغیرهای نسبت دهانه برشی به عمق مؤثر، مقاومت فشاری بتن، تسلیح برشی افقی جان و ارتفاع مورد بررسی قرار ‏گرفت. نتایج نشان داد که کاهش نسبت دهانه برشی به عمق مؤثر، موجب افزایش در ظرفیت باربری شد، افزایش مقاومت بتن، ظرفیت را به طور ملموسی بهبود بخشید. ‏همچنین اثر اندازه بررسی شد، به‌طوری‌که افزایش عمق باعث افزایش در ظرفیت اما کاهش در تغییرمکان متناظر نقطه‌ی شکست گردید‎.‎‏ ‏علاوه بر این، با توجه به ماهیت و رفتار متفاوت میلگردهای مورد استفاده به نسبت میلگردهای متعارف فولادی، یک مدل تحلیلی مبتنی بر روش بست و بند برای تیرهای عمیق مسلح به ‏میلگرد کامپوزیتی‏ توسعه داده شد. این مدل، هم برای نمونه‌های این ‏پژوهش، و هم داده‌های موجود در ادبیات فنی، پیش‌بینی‌های محافظه‌کارانه و قابل‌اعتمادی را ارائه می‌کند.‏
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Application of Strut-and-Tie Method for Shear Analysis of Deep ‎Beams ‎Reinforced with GFRP Bars: Model Development and ‎Experimental Validation

نویسندگان English

Mohammad shabanlou 1
Zeinab Meghdadi 2
Mahmoud Reza ُُShiravand 3
1 Postdoctoral Researcher, Faculty of Civil, Water, and Environmental Engineering, Shahid Beheshti University, Tehran, ‎Iran
2 PhD Graduated, Department of Civil Engineering, Sharif University of Technology, Tehran, Iran
3 Assistant Professor, Department of Civil Engineering, Shahid Beheshti University, Tehran, Iran
چکیده English

Deep reinforced concrete beams with low shear span-to-effective depth ratio ‎‎(a/d) are considered ‎challenging structural members due to their load transfer ‎mechanism through arch action and ‎dominant shear behavior. Unlike slender ‎beams, the internal force distribution in deep beams is ‎highly nonlinear and ‎governed by compression struts and tension ties, which complicates both ‎‎analysis and design. Given the growing concerns regarding corrosion of steel ‎reinforcement in ‎aggressive environments, the use of glass fiber reinforced ‎polymer (GFRP) bars has emerged as a ‎promising alternative due to their ‎corrosion resistance, high tensile strength, and lightweight ‎characteristics. ‎However, fundamental differences in mechanical properties of GFRP ‎‎reinforcement, such as linear elastic behavior up to rupture, relatively low ‎modulus of elasticity, ‎and lack of yielding, necessitate revisions in conventional ‎design assumptions and analytical ‎models developed for steel-reinforced ‎concrete members. In this study, the shear behavior and ‎structural performance ‎of GFRP-reinforced concrete deep beams were investigated through a ‎‎comprehensive experimental program involving six full-scale specimens. The ‎experimental ‎variables included the a/d, levels of concrete compressive ‎strength, ‎the presence or absence of horizontal web reinforcement, and the size effect. The ‎results ‎demonstrated that the investigated parameters significantly influenced ‎the structural behavior of ‎the beams. Reducing the a/d ratio from 0.9 to 0.5 ‎increased the ultimate load capacity by ‎approximately 59%, confirming the ‎dominance of arching action in deep beams with shorter ‎shear spans. Increasing ‎the concrete compressive strength from 22 MPa to 45 MPa improved the ‎load ‎capacity by about 48%, while the inclusion of horizontal web reinforcement ‎enhanced the ‎load capacity by approximately 24% and contributed to improved ‎crack control. In addition, an ‎analytical model was developed and adapted for ‎GFRP-reinforced deep beams. The proposed ‎model produced prediction-to-test ‎ratios ranging from 0.56 to 1.17 for the tested specimens. ‎

کلیدواژه‌ها English

Deep beam ‎
GFRP bar
Shear strength ‎
Strut-and-tie method ‎
Size effect‏ ‏
Horizontal shear ‎reinforcement

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 29 آبان 1405

  • تاریخ دریافت 07 شهریور 1405
  • تاریخ بازنگری 29 مهر 1405
  • تاریخ پذیرش 29 آبان 1405