[1] Kolib, A., Pakkala, T.A., Lahdensivu, J., Kiviste, M. (2014). Durability demands related to carbonation induced corrosion for Finnish concrete buildings in changing climate, Eng. Struct., 63, 42-52.
[2] Singh, L.P., Ali, D., Sharma, U. (2016). Studies on optimization of nanoparticles dosage in cementitious system, Cem. Concr. Compos., 70, 60-68.
[3] Ganjian, E., Pouya, H.S. (2009). The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag, Constr. Build. Mater., 23, 644-652.
[4] Juenger, M.C., Siddique, R. (2015). Recent advances in understanding the role of supplementary cementations materials in concrete, Cem. Concr. Res., 78, 71-80.
[5] Yen, T., Hsu, T.H., Liu, Y.W., Chen, S.H. (2007). Influence of class F FA on the abrasion-erosion resistance of high-strength concrete, Constr. Build. Mater., 21(2), 458-463.
[6] Kumar, G.B.R., Sharma, U.K. (2014). Abrasion resistance of concrete containing marginal aggregates, Constr. Build. Mater., 66 (1), 712-722.
[7] Cai, X.H., He, Z., Tang, S.W., Chen, X.R. (2016). Abrasion erosion characteristics of concrete made with moderate heat Portland cement, FA and silica fume using sandblasting test, Constr. Build. Mater., 127, 804 814.
[8] Mehta, P.K. and Monteiro, P.J.M. (2006). Concrete: Microstructure, Properties, and Materials. New York: McGraw-Hill.
[9] Rao, S.K., Sravana, P., Rao, T.C. (2016). Investigating the effect of M-sand on abrasion resistance of FA RCC (FRCC), Constr. Build. Mater., 118, 352-363.
[10] Terzić, A., Pezo, L., Mitić, V., Radojević, Z. (2015). Artificial FA based aggregates properties influence on lightweight concrete performances, Ceram. Int., 41, 2714-2726.
[11] Zhang, M., Islam, J. (2012). Use of nano-silica to reduce setting time and increase early Strength of concretes with high volumes of FA or slag, Constr .Build. Mater., 29, 573-580.
[12] Mardani-Aghabaglou, A., Andiç-Çakir, Ö., Ramyar, K. (2013). Freeze-thaw resistance and transport properties of high-volume FA Roller Compacted Concrete designed by maximum density method, Cem. Concr. Compos., 37 (1), 259-266.
[13] Yerramala, A., Babu, K.G. (2011). Transport properties of high-volume FA roller compacted concrete, Cem. Concr. Compos., 33, 1057-1062.
[14] Supit, S.W.M., Shaikh, F.U.A. (2015). Durability properties of high-volume FA concrete containing nano-silica, Mater. Struct., 48 (8), 2431-2445.
[15] Shaikh, F.U.A., Supit, S.W. (2015). Chloride induced corrosion durability of high-volume FA concretes containing nano particles, Constr. Build. Mater., 99, 208-225.
[16] G. Pachideh, “An Investigation on the Effect of High Temperatures on the Mechanical Properties and Microstructure of Concrete Containing Multiwalled Carbon Materials Performance and Characterization An Investigation on the Effect of High Temperatures on the Mechanical ,” no. March 2018, 2019, doi: 10.1520/MPC20180061.
[17] G Pachideh, V Toufigh.( 2022). A Study on the Cementitious Mortars Containing Multi-Walled Carbon Nanotubes and Nanographene, Journal of Testing and Evaluation, Accepted.
[18] F. Seddighi, G. Pachideh, and S. Behnoush, “Journal of Building Engineering A study of mechanical and microstructures properties of autoclaved aerated concrete containing nano-graphene,” J. Build. Eng., vol. 43, no. May, p. 103106, 2021, doi: 10.1016/j.jobe.2021.103106.
[19] Fahim, G., Hussein, Z., Hafizah, N., Khalid, A., Rahman, A., Sam, M., Tahir, M., Hasanah, N., Shukor, A., Alyousef, R., Mirza, J., 2020. Durability performance of modified concrete incorporating fly ash and effective microorganism. Constr. Build. Mater. 120947. https://doi.org/10.1016/j.conbuildmat.2020.120947
[20] L. Wang, Z. Yu, B. Liu, F. Zhao, S. Tang, and M. Jin, “Effects of Fly Ash Dosage on Shrinkage , Crack Resistance and Fractal Characteristics of Face Slab Concrete,” 2022.
[21] S. C. Modified, F. Farooq, S. Czarnecki, P. Niewiadomski, and F. Aslam, “A Comparative Study for the Prediction of the Compressive,” 2021.
[22] S. Khursheed, J. J. Pijush, and S. Sanjay, “Compressive strength prediction of fly ash concrete by using machine learning techniques,” Innov. Infrastruct. Solut., 2021, doi: 10.1007/s41062-021-00506-z.
[23] J. Ahmadi, H. Azizi, and M. Koohi, “Investigation of the effect of zeolite in different grades of cement on the strength and permeability of concrete,” Concr. Res., vol. 8, no. 2, pp. 5–18, 2015.
[24] G. Fahim et al., “Durability performance of modified concrete incorporating fly ash and effective microorganism,” Constr. Build. Mater., no. xxxx, p. 120947, 2020, doi: 10.1016/j.conbuildmat.2020.120947.
[25] Scrivener, K.L., Crumbie, A.K., Laugesen, P. (2004). The interfacial transition zone (ITZ) between cement paste and aggregate in concrete, Interface Sci., 12, 411-421.
[26] Shahbazapanahi, S. (2017). Influence of Barley Husk Ash with Nano- Silica on the Concrete Behavior, Journal of Concrete Research, 10, 111-122.
[27] Adamu, M., Mohammed, B.S., Liew, M.S. (2018). Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica Constr. Build. Mater., 171, 521-538.
[28] Adak, D., Sarkar, M., Mandal, S. (2014). Effect of nano-silica on strength and durability of fly ash based geopolymer mortar, Constr. Build. Mater., 70, 435-459.
[29] Singh, L.P., Ali, D., Tyagi, I., Sharma, U., Singh, R., Hou, P. (2019). Durability studies of nano-engineered fly ash concrete, Constr .Build. Mater., 194, 205-215.
[30] R. Madandoust, M. M. Ranjbar, and E. Mohseni, “Effect of Nano Materials on Engineering Properties of Self Compacting Mortar Containing Fly Ash,” Concr. Res., vol. 5, no. 2, pp. 55–67, 2012.