[1]
Zandi Y. (2016). Excellent concrete technology design based on durability parameters.
Tabriz University research Publication.
[2] ACI Committee 201. (2001). Guide to Durable Concrete.
[3] Neville Adam. (1999). Properties of Concrete. Abu Reihan Biruni Publications.
[4] Ramezanianpour, Jahangiri, Ahmadi, Delnavaz. (2010). Evaluation of service life estimation models for reinforced concrete structures built in the Persian Gulf. Second National Concrete Conference.
[5] Zandi Y, Husem M and Pul S. (2011). Effect of distribution and orientation of steel fiber reinforced concrete. Proceedings of the 4th WSEAS international conference on Energy and development-environment-biomedicine. World Scientific and Engineering Academy and Society (WSEAS). Pages 260-264.
[6] zandi, Y., and Akpinar, M. V. (2012). An experimental study on separately ground and together grinding Portland slag cement strength properties. Res. J. Recent Sci. Volume 1, no. 4, Pages 27‒40.
[7] Ahmadi Mogaddam H., Jahanyar Agdam M., Ahmadi Mogaddam A. (2006). Cement mixed with fly ash effectiv for concrete durability. 13th Conference of Civil Engineering Students Nationwide.
[8] Zandi Y., Akgun Y. and Durmus A. (2012). Investigating the use of high-performance concrete in partially prestressed beams and optimization of partially prestressed ratio. Indian Journal of Science and Technology. Vol.5, No.7, Pages 2991-2996.
[9] Y. Zandi, R. Naziri, R. Hamedani. (2013). Effect of layout and size optimization conditions in architectural design of reinforced concrete flat slab buildings Bull. Environ. Pharmacol. Life Sci.Pages 62-68.
[10] Mousavi H. (2001). Factors affecting compressive strength and durability of concrete. Cement Technology Scientific Monthly.
[11] ACI Committee. (2001). Protection of Metals in Concrete against Corrosion. ACI 222-01, American Concrete Institute, Farmington Hills, MI.
[12] Zandi, Y. (2013). Effect of mix design on restrained shrinkage of concrete. Bulletin of Environment and Life Sciences. Pages 13‒20.
[13]
Ayyoubi M. (2016). Application of micro silica slurry in concrete industry.
8th Iranian Concrete Conference
[14] Zandi, Y., and Alayi, M. (2019).Effect of comparison of Ardabil pozzuoli cement and type 2 Sufyan cement compressive strength viewpoints and improvement solutions. Journal of Structural and Construction Engineering. Volume 6, no. 4, Pages
95‒110.
[15] Cai, T., Zandi, Y., Agdas, A. S., Selmi, A., Issakhov, A., & Roco-Videla, A. (2021). The compressive strength of concrete retrofitted with wind ash and steel slag pozzolans with a water-cement based polymers. Advances in concrete construction. Pages 507-519.
[16] Zandi Y, Öztürk N, Öztürk HT, Durmuş A. (2012). Study of utilization in cement of activated drinking water treatment sludge at various temperature. Advances in Environmental Biology. Pages 2958–2965.
[17] Yan Cao, Yousef Zandi, Abouzar Rahimi, Yujia Wu, Leijie Fu, Qiangfeng Wang, Nebojˇsa Deni´, Mohamed Amine Khadimallah, Momir Miliˇ, Marija Paunovi. (2021). A new intelligence fuzzy-based hybrid metaheuristic algorithm for analyzing the application of tea waste in concrete as natural fiber. Computers and Electronics in Agriculture.
[18] Zandi, Y., Burnaz, O., and Durmus, A. (2012). Determining the temperature distributions of fire exposed reinforced concrete cross sections with different methods. Res. J. Env. Earth Sci. Volume. 4, no. 8, Pages. 782‒788.
[19] Yan Cao, Yousef Zandi, Abouzar Rahimi, Dalibor Petkovi´c, Nebojˇsa Deni´, Jelena Stojanovi´, Boban Spasi´c f, Vuk Vujovi´, Mohamed Amine Khadimallah Hamid Assilzadeh. (2021). Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm. Contents lists available at ScienceDirect Structures. Pages 3750–3756.
[20] Chia, K. S., Zhang, M. H. (2002). Water permeability and chloride penetrability of high-strength lightweight aggregate concrete. Cement and Concrete Research. Volume 32, Pages 639-645.
[21] zandi, Y., and Akpinar, M. V. (2012). Evaluation of internal resistance in asphalt concretes. Int. J. Concrete Struct. Mater. Volume 6, Pages. 247‒250.
[22] Zandi, Y., and Alayi, M. (2019).Effect of comparison of Ardabil pozzuoli cement and type 2 Sufyan cement compressive strength viewpoints and improvement solutions. Journal of Structural and Construction Engineering. Volume 6, Pages 95‒110.
[22] Qiao Yanzhen, Yousef Zandi, Abouzar Rahimi, Sara Pourkhorshidi, Angel Roco-Videla, Mohamed Amin Khadimallah, Mohammed Jameel, Ehsan Kasehchi and Hamid Assilzadeh. (2021). Nano-SiO2 for efficiency of geotechnical properties of fine soils in mining and civil engineering. Advances in Nano Research. Vol. 11, Pages 301-312.
[24] Biljana Petkovi´, Alireza Sadighi Agdas, Yousef Zandi, Ivica Nikoli´, Nebojˇsa Deni´, Sonja D. Radenkovic, Sattam Fahad Almojil, Angel Roco-Videla, Nenad Koji´, Dragan Zlatkovi´, Jelena Stojanovi´. (2021).
Neuro fuzzy evaluation of circular economy based on waste generation, recycling. Renewable energy, biomass and soil pollution.
[25] Mortazavi, M., and Majlessi, M. (2013). Evaluation of Silica Fume Effect on Compressive Strength of Structural Lightweight Concrete Containing LECA as Lightweight Aggregate. Advanced Materials Research. Pages 344 – 349
[26] Guneyisi, E., and Gesoslu, M. (2012). Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes. Construction and Building Materials. Volume 34.
[27] Zandi, Y., and Abedi, M. (2020). Comparative evaluation of the effect of water / cement ratio (W / C), type and percentage of fly ash on concrete strength against chloride ion penetration and its porosity. Amirkabir Journal of Civil Engineering.
[28] Vahidi, A., MirAhmadi, M., Hassanzadeh, M., and Zabetiyan. F. (2011). Investigation of Effective Factors on Concrete impermeability Studies, Case Study of the First Iranian Concrete boat. International Conference on Impermeability Concrete of Drinking Water Tanks.
[29] Shariati, M., Rafie, S., Mehrabi, P., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N. T., Salih, M. N. A., and Poi-Ngian, S. (2019).
Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete.
Advances in Concrete Construction, Volume 8. no. 3, Pages 225–237.
[30] Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M. D., Marto, A., Mu'azu, M. A., Ghanbari, E., Mahdizadeh, M. B., Shariati, M., and Khorami, M. (2018). Portland cement structure and its major oxides and fineness. Smart Struct. Syst. Volume. 22, no. 4, Pages. 425‒432.
[31] Shariati, M., Heiati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M. N. A., and Poi-Ngian, S. Application of waste tire rubber aggregate in porous concrete. (2019). Smart Structures and Systems. Volume. 24, no. 4, Pages. 553‒5669.
[33] Yadollah Sedghi, Yosef Zandi, Masoud Paknahad, Hamid Assilzadeh and Mohamed Amine Khadimallah. (2021). Optimization of shear connectors with high strength nano concrete using soft computing techniquese. Advances in Nano Research. Volume 11, Number 6, Pages 595-605.
[34] ASTMC 618-99a. (1999). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concret. ASTM International, West onshohocken, PA.
[36]Wang, Dezhi ; Zhou, Xiangming ; Meng, Yunfang ; Chen, Zhen. (2017). Durability of concrete containing fly ash and silica fume against combined freezing-thawing and sulfate attack. Construction & building materials. Vol.147, p.398-406.
[37] Nagaratnam, Brabha H; Faheem, Ahmed; Rahman, Muhammad Ekhlasur; Mannan, Mohammad Abdul; Leblouba, Moussa. (2015). Mechanical and Durability Properties of Medium Strength Self-Compacting Concrete with High-Volume Fly Ash and Blended Aggregates. Periodica polytechnica. Civil engineering. Bauingenieurwesen. Vol.59 (2), p.155-164.
[38] ASTM C150-05. (2005). Standard specification for Portland cement. ASTM International, West Conshohocken, PA.
[39] ASTM C494/C494M-19, Standard specification for chemical admixtures for concrete, ASTM International, West Conshohocken, PA, 2019.
[40] ASTM C33/C33M-18. (2018). Standard specification for concrete aggregates. ASTM International, West Conshohocken, PA.
[41] ACI 211.1-91. (2002). Standard practice for selecting proportions for normal, heavyweight, and mass concrete. American Concrete Institute, USA, reapproved.
[42] ASTM C 143. (2008). Standard test method for length change of hardened hydraulic-cement mortar and concrete. ASTM International, West Conshohocken, PA.
[44] Arian Heirati, Yousef Zandi, Shahriar Tavousi Tafreshi and Manuchehr Behruyan. (2021). Analysis of the superplasticizer demand using computer simulation. Advances in Nano Research. Vol 11, Pages 565-57.
[45] Cox, C., and Vennesland, V. (Eds.). (1997). Corrosion and Protection of Metals in Contact with Concrete, Final report. European Commission. Directorate General Science, Research and Development, Brussels, EUR 17608 EN.
[46] ACI 222. (2002). Protection of metals in concrete against corrosion. American Concrete Institute, USA.