[1] Pachideh, G. Kafi, M. and Gholhaki, M. (2020). Evaluation of cyclic performance of a novel bracing system equipped with a circular energy dissipater.
Structures, 28, 467–481.
https://doi.org/10.1016/j.istruc.2020.09.007
[3] Pachideh, G. Gholhaki, M. and Kafi, M. and (2020). Experimental and numerical evaluation of an innovative diamond-scheme bracing system equipped with a yielding damper. Steel and Composite Structures, 36(2), 197-211. https://doi.org/10.12989/scs.2020.36.2.197
[4] Chou, C.-C. and Uang, C.-M. (2002). Cyclic performance of a type of steel beam to steel-encased reinforced concrete column moment connection. Journal of Constructional Steel Research, 58(5–8), 637–663. https://doi.org/10.1016/s0143-974x(01)00089-x
[5] Cheng, C.-T. and Chen, C.-C. (2005). Seismic behavior of steel beam and reinforced concrete column connections. Journal of Constructional Steel Research, 61(5), 587–606. https://doi.org/10.1016/j.jcsr.2004.09.003
[6] Ju, Y. K. Kim, J.-Y. and Kim, S.-D. (2007). Experimental Evaluation of New Concrete Encased Steel Composite Beam to Steel Column Joint. Journal of Structural Engineering, 133(4), 519–529. https://doi.org/10.1061/(asce)0733-9445(2007)133:4(519)
[7] Eder, M. A. Vollum, R. L. and Elghazouli, A. Y. (2011). Inelastic behaviour of tubular column-to-flat slab connections. Journal of Constructional Steel Research, 67(7), 1164–1173. https://doi.org/10.1016/j.jcsr.2011.02.009
[8] Bompa, D. V. and Elghazouli, A. Y. (2015). Ultimate shear behaviour of hybrid reinforced concrete beam-to-steel column assemblages. Engineering Structures, 101, 318–336. https://doi.org/10.1016/j.engstruct.2015.07.033
[9] El-Masry, A.H. Dabaon, M.A. El-Shafiey, T.F. and El-Hakim A. K. (2015). Investigation on an innovative way to connect
RC beam and steel column. International Scholarly and Scientific Research & Innovation, 9(4), 362-368.
[10] Zhang, J. Hu, X. Gong, S. Wu, J. Zhu, W. and Ren, C. (2021). Experimental investigation of steel-concrete composite beam to reinforced-concrete column joints with single plate shear connection. Engineering Structures, 245, 112906. https://doi.org/10.1016/j.engstruct.2021.112906
[11] Song, Y. Wang, J. Uy, B. and Li, D. (2021). Behaviour and design of stainless steel-concrete composite beam-to-column joints. Journal of Constructional Steel Research, 184, 106800. https://doi.org/10.1016/j.jcsr.2021.106800
[12] Wang, H. Huo, J. Liu, Y. Elchalakani, M. and Zhu, Z. (2021). Dynamic performance of composite beam-column connections subjected to impact loadings. Journal of Constructional Steel Research, 178, 106498. https://doi.org/10.1016/j.jcsr.2020.106498
[13] Lacki, P. Derlatka, A. Kasza, P. and Gao, S. (2021). Numerical study of steel–concrete composite beam with composite dowels connectors. Computers and Structures, 255, 106618. https://doi.org/10.1016/j.compstruc.2021.106618
[14] Yang, I.-S. Lee, D. Ju, H. Lee, S.-J. and Oh, J.-Y. (2022). Steel-concrete composite beam-column connections utilizing prefabricated permanent steel form. Journal of Building Engineering, 46, 103836. https://doi.org/10.1016/j.jobe.2021.103836
[15] Zhang, J. Pei, Z. and Rong, X. (2022). Experimental seismic study of an innovative precast steel–concrete composite beam–column joint. Soil Dynamics and Earthquake Engineering, 161, 107420. https://doi.org/10.1016/j.soildyn.2022.107420
[16] H.ElMasry A, Dabaon M, Elshafiey T, Khalil A-H. (2016). Numerical modeling of innovative connection between RC beam and steel column. International Journal of Engineering and Advanced Technology, 5(4),78–82.
[17] Bahaari, M. R. and Sherbourne, A. N. (2000). Behavior of eight-bolt large capacity endplate connections. Computers and Structures, 77(3), 315–325. https://doi.org/10.1016/s0045-7949(99)00218-7
[18] Wang, Y. Wang, Z. Pan, J. and Wang, P. (2020). Seismic Behavior of a Novel Blind Bolted Flush End-Plate Connection to Strengthened Concrete-Filled Steel Tube Columns. Applied Sciences, 10(7), 2517. https://doi.org/10.3390/app10072517
[19] Lin, T. Wang, Z. Hu, F. and Wang, P. (2022). Finite-Element Analysis of High-Strength Steel Extended End-Plate Connections under Cyclic Loading. Materials, 15(8), 2912. https://doi.org/10.3390/ma15082912
[20] Cao, X. Wu, L. and Li, Z. (2020). Behaviour of steel-reinforced concrete columns under combined torsion based on ABAQUS FEA. Engineering Structures, 209, 109980. https://doi.org/10.1016/j.engstruct.2019.109980
[21] Qingfu, L. Wei, G. and Yihang, K. (2020). Parameter calculation and verification of concrete plastic damage model of ABAQUS. In: IOP Conference Series: Materials Science and Engineering, 794(1), 012036. https://doi.org/10.1088/1757-899x/794/1/012036
[22] Tran, V.-L. (2022). Investigating the behavior of steel flush endplate connections at elevated temperatures using FEM and ANN. International Journal of Steel Structures, 22(5), 1433–1451. https://doi.org/10.1007/s13296-022-00650-x