[1] Dolan, C.W., J.F. Stanton, and R.G. Anderson. (1987). Moment resistant connections and simple connections. PCI Journal. 32(2), p. 62-74.
[2] Cheok, GS, Lew, H. (1991). Performance of precast concrete beam-to-column connections subject to cyclic loading. PCI Journal. 36(3), p. 56–67.
[3] M. Ricles, Richard Sause, Members, Maria M. Garlock and Chen Zhao. (2001). Posttensioned seismic-resistant connections for steel frames. Journal of Structural Engineering. 127(2), p. 113-121.
[4] J. M. Ricles, R. Sause, S. W. Peng and L. W. Lu, M. (2002). Experimental evaluation of earthquake resistant posttensioned steel connections. Journal of Structural Engineering. 128(7), p. 850-859.
[5] Garlock, M.M., J.M. Ricles, and R. Sause. (2003). Cyclic load tests and analysis of bolted top-and-seat angle connections. Journal of structural Engineering. 129(12), p. 1615-1625.
[6] Garlock, M.M., R. Sause, and J.M. Ricles. (2007). Behavior and design of posttensioned steel frame systems. Journal of Structural Engineering. 133(3), p. 389-399.
[7] Moradi, S. and M.S. Alam. (2016). Ansys modeling of post-tensioned steel beam-column connections under cyclic loading. in 5th International Structural Specialty Conference, CSCE, London.
[8] Pirmoz, A., & Liu, M. M. (2016). Finite element modeling and capacity analysis of post-tensioned steel frames against progressive collapse. Engineering Structures. 126, p. 446-456.
[9] Ingquan Guan, Henry Burton, Saber Moradi. (2018). Seismic performance of a self-centering steel moment frame building: From component-level modeling to economic loss assessment, Journal of Constructional Steel Research, 150, P. 129-140.
[10] Zhang, Y., Li, Q., Zhuge, Y., Liu, A., & Zhao, W. (2019). Experimental study on spatial prefabricated self-centering steel frame with beam-column connections containing bolted web friction devices. Engineering Structures. 195, p. 1-21.
[11] Rasmussen, K. J. (2019). Behaviour and modelling of connections in cold-formed steel single C-section portal frames. Thin-Walled Structures. 143, p. 106233.
[12] Garlock, M.M., J.M. Ricles, and R. Sause. (2005). Experimental studies of full-scale posttensioned steel connections. Journal of Structural Engineering. 131(3), p. 438-448.
[13] Moradi, S. and M.S. Alam. (2017). Lateral Load–Drift Response and Limit States of Posttensioned Steel Beam-Column Connections: Parametric Study. Journal of Structural Engineering. 143(7), p. 04017044
[14] Herning, G.M. (2011). Reliability-based evaluation of seismic design and performance of steel self-centering moment-resisting frames. Doctoral dissertation, Princeton University, 265, 3459192.
[15] FEMA 355C. (2000). State of the art report on systems performance of steel moment frames subject to earthquake ground shaking. Federal Emergency Management Agency, Washington, D.C.
[16] FEMA P695. (2009). Quantification of building seismic performance factors, Applied Technology Council, Redwood City, CA.
[17] A. Gupta, H. Krawinkler. (1998). Seismic demands for the performance evaluation of steel moment resisting frame structures, PhD Thesis, Stanford University.
[18] ASCE 7-16. (2016). Minimum design loads for buildings and other structures, Reston, VA.
[19] S. Mazzoni, F. McKenna, M.H. Scott and G.L. Fenves. (2006). The open system for earthquake engineering simulation (OPENSEES) user command-language manual.
[20] USGS, (2020), ASCE 7 Hazard Tool, www.asce7hazardtool.online.