[1] Alizadeh, H. and Hosseini Lavassani, S.H., (2022). The effect of soil-structure interaction on longitudinal seismic responses of suspension bridges controlled by optimal TMD. Journal of Structural and Construction Engineering, 8(Special Issue 4), pp.439-458.
[2] Khazaei, M., Vahdani, R. and Kheyroddin, A., (2021). Investigation the Effects of Multiple Tuned Mass Damper on Reduction of Seismic Parameters of Tall Buildings Regular and Irregular on Plan in Steel Flexible Structures Under Near and Far-Fault Earthquakes. Journal of Structural and Construction Engineering, 8(2), pp.244-263.
[3] Rahman Shokrgozar, H., Naeim, K. and Imani Kalasar, H., (2017). Comparison of the Efficiency of Tuned Mass and Tuned Liquid Dampers at High-Rise Structures under Near and Far Fault Earthquakes. Journal of Structural and Construction Engineering, 3(4), pp.105-119.
[4] Den Hartog, J.P., (1985). Mechanical vibrations. Courier Corporation.
[5] IOI, T. and IKEDA, K., (1978). On the dynamic vibration damped absorber of the vibration system. Bulletin of JSME, 21(151), pp.64-71.
[6] Warburton, G.B. and Ayorinde, E.O., (1980). Optimum absorber parameters for simple systems. Earthquake Engineering & Structural Dynamics, 8(3), pp.197-217.
[7] Ayorinde, E.O. and Warburton, G.B., (1980). Minimizing structural vibrations with absorbers. Earthquake Engineering & Structural Dynamics, 8(3), pp.219-236.
[8] Bapat, V.A. and Kumaraswamy, H.V., (1979). Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber. Journal of sound and vibration, 63(4), pp.469-474.
[9] Bapat, V.A. and Kumaraswamy, H.V., (1980). Optimizing The Untuned Viscous Dynamic Vibration Absorber With Primary System Damping-A Frequency Locus Method-Reply. Journal of Sound and Vibration, 73(3), p.472.
[10] Warburton, G.B., (1982). Optimum absorber parameters for various combinations of response and excitation parameters. Earthquake Engineering & Structural Dynamics, 10(3), pp.381-401.
[11] Tsai, H.C. and Lin, G.C., (1993). Optimum tuned‐mass dampers for minimizing steady‐state response of support‐excited and damped systems. Earthquake engineering & structural dynamics, 22(11), pp.957-973.
[12] Bakre, S.V. and Jangid, R.S., (2007). Optimum parameters of tuned mass damper for damped main system. Structural Control and Health Monitoring: The Official Journal of the International Association for Structural Control and Monitoring and of the European Association for the Control of Structures, 14(3), pp.448-470.
[13] Leung, A.Y.T. and Zhang, H., (2009). Particle swarm optimization of tuned mass dampers. Engineering Structures, 31(3), pp.715-728.
[14] Salvi, J. and Rizzi, E., (2012). A numerical approach towards best tuning of Tuned Mass Dampers. In Proc. of 25th Int. Conf. on Noise and Vibration Engineering (ISMA 2012), Leuven, Belgium (pp. 17-19).
[15] Etedali, S. and Mollayi, N., (2018). Cuckoo search-based least squares support vector machine models for optimum tuning of tuned mass dampers. International Journal of Structural Stability and Dynamics, 18(02), p.1850028.
[16] Keshtegar, B. and Etedali, S., (2018). Nonlinear mathematical modeling and optimum design of tuned mass dampers using adaptive dynamic harmony search algorithm. Structural Control and Health Monitoring, 25(7), p.e2163.
[17] Etedali, S., Bijaem, Z.K., Mollayi, N. and Babaiyan, V., (2021). Artificial Intelligence-Based Prediction Models for Optimal Design of Tuned Mass Dampers in Damped Structures Subjected to Different Excitations. International Journal of Structural Stability and Dynamics, p.2150120.
[18] Mohebbi, M., Shakeri, K., Ghanbarpour, Y. and Majzoub, H., (2013). Designing optimal multiple tuned mass dampers using genetic algorithms (GAs) for mitigating the seismic response of structures. Journal of Vibration and Control, 19(4), pp.605-625.
[19] Etedali, S., Seifi, M. and Akbari, M., (2018). A numerical study on optimal FTMD parameters considering soil-structure interaction effects. Geomechanics and Engineering, 16(5), pp.527-538.
[20] Shahi, M., Sohrabi, M.R. and Etedali, S., (2018). Seismic control of high-rise buildings equipped with ATMD including soil-structure interaction effects. Journal of Earthquake and Tsunami, 12(03), p.1850010.
[21] Etedali, S., (2020). Ranking of design scenarios of TMD for seismically excited structures using TOPSIS. Frontiers of Structural and Civil Engineering, 14(6), pp.1372-1386.
[22] Farshidianfar, A. and Soheili, S., (2013). Ant colony optimization of tuned mass dampers for earthquake oscillations of high-rise structures including soil–structure interaction. Soil Dynamics and Earthquake Engineering, 51, pp.14-22.
[23] Etedali, S., (2017). A new modified independent modal space control approach toward control of seismic-excited structures. Bulletin of Earthquake Engineering, 15(10), pp.4215-4243.
[24] Etedali, S., Akbari, M. and Seifi, M., (2019). MOCS-based optimum design of TMD and FTMD for tall buildings under near-field earthquakes including SSI effects. Soil Dynamics and Earthquake Engineering, 119, pp.36-50.
[25] Etedali, S. and Rakhshani, H., (2018). Optimum design of tuned mass dampers using multi-objective cuckoo search for buildings under seismic excitations. Alexandria engineering journal, 57(4), pp.3205-3218.
[26] Kaveh, A., Javadi, S.M. and Moghanni, R.M., (2020). Optimal structural control of tall buildings using tuned mass dampers via chaotic optimization algorithm. In Structures (Vol. 28, pp. 2704-2713). Elsevier.
[27] Etedali, S., Zamani, A.A. and Tavakoli, S., (2018). A GBMO-based PIλDμ controller for vibration mitigation of seismic-excited structures. Automation in Construction, 87, pp.1-12.
[28] Hosseinaei, S., Ghasemi, M.R. and Etedali, S., (2021). Optimal design of passive and active control systems in seismic-excited structures using a new modified TLBO. Periodica Polytechnica Civil Engineering, 65(1), pp.37-55.
[29] Rao, R.V., Savsani, V.J. and Vakharia, D.P., (2011). Teaching–learning-based optimization: a novel method for constrained mechanical design optimization problems. Computer-Aided Design, 43(3), pp.303-315.
[30] Rao, R.V. and Patel, V., (2013). An improved teaching-learning-based optimization algorithm for solving unconstrained optimization problems. Scientia Iranica, 20(3), pp.710-720.
[31] Koza, J.R., (1994). Genetic programming as a means for programming computers by natural selection. Statistics and computing, 4(2), pp.87-112.
[32] Zhang, F., Mei, Y., Nguyen, S. and Zhang, M., (2020). Evolving scheduling heuristics via genetic programming with feature selection in dynamic flexible job-shop scheduling. ieee transactions on cybernetics, 51(4), pp.1797-1811.
[33] Anđelić, N., Baressi Šegota, S., Lorencin, I., Mrzljak, V. and Car, Z., (2021). Estimation of COVID-19 epidemic curves using genetic programming algorithm. Health informatics journal, 27(1), p.1460458220976728.
[34] The Math Works, Inc. (2016). MATLAB (Version 2016a).
[35] Ramezani M., Zahrai S.M. (2016). Optimal Parameters of Tuned Mass Damper for Tall Buildings by neural networks. IQBQ. 16 (4) pp.109-122. (In Persian)
[36] Mohebbi M., Shakeri K., Majzoub H. (2012). Genetic Algorithm Based Approach for Optimal Design of Multiple Tuned Mass Dampers (MTMDs) under Earthquake Excitation. IQBQ. 12 (1). (In Persian)
[37] Tahmassebi, A., and Gandomi, A. H. (2018). Building energy consumption forecast using multi-objective genetic programming. Measurement, 118, 164-171.