[1] Okamura, H. (1997). Self- Compacting high performance Concrete. Concrete International. pp. 50-54.
[2] Nunes, S. and Figueiras, H. and Oliveira, P. M. and Coutinho, J. S. and Figueiras, J. (2006). A methodology to assess robustness of SCC mixtures, Cement and Concrete Research, Vol(36), pp. 2115- 2122.
[3] Lin, C. H. and Lin, S.P. and Tseng,C. H. (2004). High Workability Concrete Columns under Concentric Compresion, ACI Structural Journal, Vol(101), No. 1, Jan.-Feb, pp. 85-93.
[4] Lin, C. H. and Lin, S.P. (2005). Flexural Behavior of High-Workability Concrete Columns under Cyclic Loading, ACI Structural Journal, Vol(102), No. 3, May-June, pp. 412-421.
[5] Chan, y. w. and Chen, y. S. and Liu, y. S. (2003). Development of Bond Strength of Reinforcement Steel in Self-Consolidating Concrete. ACI Structural Journal, Vol(100), No. 4, July-Aug, pp. 490-498.
[6] Paultre, P. and Khayat, K. H. and Cusson, D. and Tremblay, S. (2005). Structural Performance of Self Consolidating Concrete Used in Confined Concrete Column, ACI Structural Journal, Vol(102), No. 4, July-Aug, pp. 560-568.
[7] Esfahani, M. R. and Lachemi, M. and Kianoush, M. R. (2008). Top-Bar Effect of Steel Bars in Self Consolidating Concrete (SCC), Engineering Structures Journal, Elsevier Sci Ltd, Oxford, England, No. 30, pp. 52-60.
[8] Chen, y. F. (2003). An Investigation on Confinement Behavior of Square Self-CoMPacting Concrete Columns, MS thesis, National Taiwan University, Department of Civil Engineering.
[9] ACI Committee 209, (2008). Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures, Designing for Creep and Shrinkage in Concrete Structures, SP-76, American Concrete Institue, Farmington Hills, MI, pp. 93-300.
[10] Al-Nasra, M. M. and Asha, N. M. (2013). Shear reinforcements in the reinforced concrete beams. American Journal of Engineering Research (AJER), 2(10), 2320-0847.
[11] ACI 440.2R-02, (2002). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute.
[12] El-Mihilmy, M. T. and Tedesco, J. W. (2000). Analysis of reinforced concrete beams strengthened with FRP laminates. Journal of Structural Engineering, 126(6), pp. 684-691.
[13] Al-Mahmoud, F. and Castel, A. and François, R. and Tourneur, C. (2009). Strengthening of RC members with near-surface mounted GFRP rods. Composite Structures, 91(2): 138-147.
[14] Tavakkolizadeh, M. and Saadatmanesh, H. (2003). Strengthening of Steel-Concrete Composite Girders Using Carbon Fiber Reinforced Polymers Sheets. Journal of Structural Engineering ASCE, 129(1), pp. 30-40.
[15] Barros, J. A. and Fortes, A. S. (2005). Flexural strengthening of concrete beams with GFRP laminates bonded into slits. Cement and Concrete Composites, 27(4), pp. 471-480.
[16] Tang, W. C. and Balendran, R. V. and Nadeem, A. and Leung, H. Y. (2006). Flexural Strengthening of Reinforced Light Weight Polystyrene Aggregate Concrete Beams with Near Surface Mounted GFRP Bars. Building and Environment, Vol(41), pp. 1381-1393.
[17] BoWang, G. J. and Teng, L. and Delorenzis, L. (2006). StrainMonitoring of Rc Strengethed with Smart NSM FRP Bars. Construction Building Material.
[18] Domone, P. L. (2007). A review of the hardened mechanical properties of self-compacting concrete. Cement and Concrete Composites, Vol(29), no.1 pp.1-12.
[19] Mazloom, M. And Saffari, A. and Mehrvand, M. Compressive, (2015). shear and torsional strength of beams made of self-compacting concrete. Computers and Concrete, Vol(15), no. 6, pp. 935-950.
[20] Hansen, E. and Willam, K. and Carol, I. (2001). A two surface anisotropic damage/plasticity model for plain concrete Proc. Framcos Fracture Mechanics of Concrete Materials, pp. 549-56.
[21] Abaqus Theory manual and user manual and Example Manual Version 6.10. Providence, (2010).
[22] Taqieddin, ZN. (2008). Elasto-Plastic and damage modeling of reinforced concrete. Ph.D. dissertation. Louisiana State Univ. Baton Rouge LA. Dept. Civil & Environmental Engineering,
[23] ABAQUS Inc, ABAQUS/CAE User Manual, Version 6.10.
[24] Kok, L. (2004). Effect of beam size & FRP thickness on interfacial shear stress concentration failure mode in FRP strengthened beam. MS thesis. Singapor university.
[25] Lu, XZ. and Ten, JG. and Ye, LP. And Jaing, JJ. (2005). Bond-slip models for FRP sheets/plates bonded to
concrete. Eng Struct, Vol (24(5)), pp. 920-37.