[1] Taghavi, A.M. and Zamani_Beydokhti, E. (2018). Dynamic responses of base_isolated and fixed RC buildings under near fault and far field earthquakes. In: Proceedings of the 11th International Congress on Civil Engineering, Tehran: Tehran University, 8 pages.
[2] Taghavi, A.M. and Zamani_Beydokhti, E. (2018). The effect of isolators positioning at different heights on seismic response of RC buildings. In: Proceedings of 2nd national conference on applied researches in structural engineer and construction management, Tehran: Sharif University, 14 pages.
[3] Heaton, T.H. and Hall, J.F. (1995). Response of high-rise and base-isolated buildings to a hypothetical Mw7.0 blind thrust earthquake. Science, 267 (5195), pp 206–211.
[4] IAEA, (2002). Verification of analysis methods for predicting the behavior of seismically isolated nuclear structures, final report of a coordinated research project 1996–1999. Tech. Rep. IAEATECDOC-1288, IAEA, Vienna, Austria.
[5] Medel-Vera, C. and Ji, T. (2015). Seismic protection technology for nuclear power plants: a systematic review. Journal of Nuclear Science and Technology, 52 (5), pp 607–632.
[6] Arati, P., Jianchun, L. and Yancheng, L. and Nicos, M. and Yang, Y. (2016). Comparative Studies of Base Isolation Systems featured with Lead Rubber Bearings and Friction Pendulum Bearings. Applied Mechanics and Materials,846, pp 114–119.
[7] Komur, M.A. (2015). Soft-Story Effects on the Behavior of Fixed-Base and LRB Base-Isolated Reinforced Concrete Buildings. Arab J Sci Eng, 41, pp 381–392.
[8] Jangid, R.S. (2005). Optimum friction pendulum system for near-fault motions. Engineering Structures, 27, pp 349–359.
[9] Su, L. and Ahmadi, G. and Tadjbakhsh, I. (1989). Comparative study of base isolation systems. Journal of Engineering Mechanics, ASCE 1989; 115:1976–92.
[10] Fan, FG. and Ahmadi, G. (1990). Multi-story base-isolated buildings under a harmonic ground motion Part II: a comparison of various systems. Nuclear Engineering and Design, 123, pp 14–26.
[11] Shrimali, MK. and Jangid, RS. (2002). A comparative study of performance of various isolation systems for liquid storage tanks. International Journal of Structural Stability and Dynamics, 2, pp 91–573.
[12] Mazzoni, S., McKenna, F., Scott, M.H., Fenves, G.L., and Jeremic B., (2007). OpenSEES Command Language Manual. [13] Tavakoli, H.R., Naghavi, F. and Goltabar, A.R. (2014). Dynamic response of base-fixed and isolated building frames under far- and near-fault earthquake. Arab J Sci Eng, 39, pp 2573–2585.
[14] F.J. Vecchio, M.B. Emara, Shear Deformation in Reinforced Concrete Frames, ACI Structural, 89 (1992) 1.
[15] Vamvatsikos, D. and Cornell, C (2004). Applied incremental dynamic analysis. Earthq Spectra, 20 (2), pp 523–553.
[16] HAZUS-MH MR5, Multi-Hazard loss Estimation Methodology: Earthquake Model. (2003). Depariment of Homeland security, FEMA, Washington, D.C.
[17] Nielson, B.G, (2005). Analytical Fragility curves for highway bridges bridges in moderate seismic zones. A Thesis presented for PHD degree. School of civil and environmental engineering Georgia institute of Technology, 400 pp.
[18] Cornell, A. C., Jayaler, F., Hamburger, R. O., and Foutch, A. D. (2002). Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines. J. Struct. Eng., 10.1061/ (ASCE) 0733-9445(2002)128:4(526), 526–533