[1] Lee, S.-S. and Goel, S.C. (2001). Performance-Based Design of Steel Moment Frames Using Target Drift and Yield Mechanism. Report No. UMCEE 01-17, Dept. of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI.
[2] Goel, S. C., Lioa, W.C.,Chao S. H. and Bayat, M.R. (2010). Performance-Based Plastic Design (pbpd) Method for Earthquake Resistant Structures: An overview. The structural design of tall and special buildings. Wiley Interscience , Vol. (19), pp (115137).
[3] Chao, S.-H. and Goel, S. C. (2006b). A Seismic Design Method for Steel Concentric Braced Frames (CBF) for Enhanced Performance. Paper No. 227. 4th International Conference on Earthquake Engineering. Taipei, Taiwan.
[4] Chao, S.-H. and Goel, S. C. (2005). Performance-Based Seismic Design of EBF Using Target Drift and Yield Mechanism as Performance Criteria. Report No. UMCEE 05-05, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI.
[5] Chao, S.-H. and Goel, S. C. (2006a). Performance-Based Design of Eccentrically Braced Frames Using Target Drift and Yield Mechanism. AISC Engineering Journal, 3rd Quarter, (173-200).
[6] Goel, S.C. and Chao, S.-H. Performance-Based Plastic Design: Earthquake Resistant Steel Structures. (2008). International Code Council.
[7] Chao, S.-H. and Goel, S. C. (2008). Performance-Based Plastic Design of Special Truss Moment Frames. AISC Engineering Journal, Second Quarter.
[8] Chao, S.-H. and Goel, S.C. (2006b). Performance-Based Plastic Design of Seismic Resistant Special Truss Moment Frames (STMF). Report No. UMCEE 06-03, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI.
[9] Liao, W.C. and Goel S. C. (2010). Performance Based Plastic Design (PBPD) of Reinforced Concrete Special Moment Frame Structures. The 3rd Congress of the International Federation for Structural Concrete (fib), Washington DC.
[10] Sahoo DR and Chao SH. (2010). Performance-Based Plastic Design for Buckling-Restrained Braced Frames. In: Proceedings of 9th US national and 10th Canadian conference on earthquake engineering.
[11] Goel, S.C., Liao, W.-C., Bayat, M. R., and Leelataviwat, S. (2009). Performance-Based Plastic Design (PBPD) Method for earthquake Resistant Structures: An Overview. In: Proceedings of Structural Engineers Association of California Convention SEAOC 2009, San Diego, California.
[12] Leelataviwat, S., Saewon, W. and Goel, S.C. (2007). An Energy Based Method for Seismic Evaluation of Structures. In: Proceedings of Structural Engineers Association of California Convention SEAOC, Lake Tahoe, California, 2131.
[13] Bayat, M. R., Goel, S. C. and Chao, S.-H. (2008). Further Refinement of Performance-Based Plastic Design (PBPD) of Structures for Earthquake Resistance. 14th World Conference on Earthquake Engineering, Paper No. 05-01-0412, Beijing China.
[14] Rezai Pajand, M. and Mirafzali, E. (1393). The Effects of Viscous Damping on the Plastic Design of Bending Frames. Fluid and Structure Mechanics of Shahrood, (4-2), (35-51).
[15] Goel, S. C. and Leelataviwat, S. (1998). Seismic Design by Plastic Method. Engineering Structures, Elsevier Science, (4-6), (465-471).
[16] NEHRP Recommended Seismic Provisions for New Buildings and Other Structures., (2009). PART 3, RESOURCE PAPERS (RP) ON SPECIAL TOPICS IN SEISMIC DESIGN.
[17] Lee, Soon-Sik and Goel, S.C. (2000). A New Lateral Force Distribution for Seismic Design of Steel Structure. In: Proceedings of U.S.-Japan Workshop on Seismic Fracture Issues in Steel Structures, San Francisco, CA.
[18] Chao, S.-H., Goel, S.C. and Lee, S.-S. (2007). A Seismic Design Lateral Force Distribution Based on Inelastic State of Structures. Earthquake Spectra, Earthquake Engineering Research Institute, 23:3, 547-569.
[19] Iran National Standard no.2800. (1384). Third edition.
[20] Iranian National Building Code, part 6: The Forces on the Building. (1385).
[21] Iranian National Building Code, part 10: Design and Construction of Steel Buildings. (1387).
[22] CSI. (2007). Perform-3D V.4.0 User Manual. Computers & Structures, Inc., Berkeley, USA.
[23] FEMA, “Quantification of Building Seismic Performance Factors (ATC-63 Project),” FEMA P695., (2009). Federal Emergency Management Agency, Washington D.C.
[24] Seismic Evaluation and Retrofit of Existing Buildings. (1385). no.360.