[1] Matthys, S. and Taerwe, L. (2000). Concrete slabs reinforced with FRP grids. I: One-way bending. ASCE Journal of Composites for Construction, 4(3), pp. 145–53.
[2] Pilakoutas, K. and Neocleous, K. and Guadagnini, M. (2002). Design philosophy issues of fiber reinforced polymer reinforced concrete structures. ASCE Journal of Composites for Construction, 6(3), pp. 154–61.
[3] Nanni, A. (2003). North American design guidelines for concrete reinforcement and strengthening using FRP: principles, applications and unresolved issues. Construction and Building Materials, 17(6–7), pp. 439–46.
[4] Branson, D. E. (1968). Design procedures for computing deflections. Journal o f the American Concrete Institute, 65(9), pp. 730-742.
[5] CAN/CSA-S806. (2012). Design and Construction of building components with fibre-reinforced polymers. Canadian Standards Association. Ontario, Canada, p. 187.
[6] ISIS Manual No.3. (2007). Design Manual No. 3: Reinforcing Concrete Structures with Fibre Reinforced Polymers. The Canadian Network of Centres of Excellence on Intelligent Sensing for Innovative Structures, University of Manitoba, Winnipeg, Manitoba, Canada, p. 151.
[7] ACI440.1R-15. (2015). Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer Bars. Reported by ACI Committee 440, Farmington Hills, Michigan.
[8] Frosch, R. J. (1999). Another look at cracking and crack control in reinforced concrete. ACI Structural Journal, 96(3), pp. 437-442.
[9] Gergely, P. and Lutz, L.A. (1968). Maximum Crack Width in Reinforced Concrete Flexural Members. American Concrete Institute, Farmington Hills, Michigan, 10(12), pp. 87-117.
[10] Esfahani, MR. and Kianoush, MR. and Lachemi, M. (2005). Bond Strength of Glass Fiber Reinforced Polymer Reinforcing Bars in Normal and Self Consolidating Concrete. Canadian Journal of Civil Engineering, 32(3), pp. 553–560.
[11] El-Nemr, A. and Ahmed, A.E. and Benmokrane, B. (2013). Flexural Behaviour and Serviceability of Normal- and High-Strength Concrete Beams Reinforced with GFRP bars. ACI Structrural Journal, 110(6), pp. 1077-1088.
[12] Theriault, M. and Benmokrane, B. (1998). Effects of FRP reinforcement ratio and concrete strength on flexural behaviour of concrete beams. Journal o f Composites for Construction, 2(1), pp. 7-16.
[13] GangaRao, H. V. S. and Faza, S. (1991). Bending and bond behaviour and design of concrete beams reinforced with fiber reinforced plastic rebars. Final report to the Federal Highway Administration, West Virginia University, p. 159.
[14] Masmoudi, R. and Benmokrane, B. and Chaallal, O. (1996). Cracking behaviour of concrete beams reinforced with fiber reinforced plastic rebars. Canadian Journal of Civil Engineering, 23(6), pp. 1172-1179.
[15] Ospina, C. E. and Bakis, C. E. (2007). Indirect Flexural Crack Control of Concrete Beams and One-Way Slabs Reinforced with FRP Bars. Proceedings of FRPRCS-8, University of Patras, Patras, Greece, Volume 8.
[17] ACI 440.2R-02. (2002). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. Reported by ACI Committee 440.
[18] ISIS Canada. (2001). Strengthening reinforced concrete structures with externally-bonded fiber reinforced polymers. Design Manual.
[20] Sabzi, J. and Esfahani, M.R. (2018). Effects of Tensile Steel Bars Arrangement on Concrete Cover Separation of RC Beams Strengthened by CFRP Sheets. Construction and Building Materials, 162(1), pp. 470-479.
[21] Yost, J. R. and Gross, S. P. and Dinehart, D. W. (2003). Effective Moment of Inertia for Glass Fiber-Reinforced Polymer-Reinforced Concrete Beams. ACI Structural Journal, 100(6), pp. 732-739.
[22] Bouguerra, K. and Ahmed, E. A. and El-Gamal, S. and Benmokrane, B. (2011). Testing of Full-Scale Concrete Bridge Deck Slabs Reinforced with Fiber Reinforced Polymer (FRP) Bars. Construction and Building Materials, 25(10), pp. 3956-3965.