[1] GSA (General Services Administration). (2013). Alternate path analysis and design guidelines for progressive collapse
resistance. Washington, DC, General Services Administration (GSA).
[2] DoD (Department of Defense). (2013). Design of buildings to resist progressive collapse., Washington, DC (2013). UFC
4–023–03.
[3] Alashker Y, Li H, El-Tawil S. (2011). Approximations in progressive collapse modeling. Journal of Structural
Engineering, 137(9), 914-24.
[4] Bao Y, Kunnath SK, El-Tawil S, Lew HS. (2008). Macromodel-based simulation of progressive collapse: RC frame
structures. Journal of Structural Engineering, 134(7), 1079-91.
[5] Bao Y, Main JA, Noh SY. (2017). Evaluation of Structural Robustness against Column Loss: Methodology and
Application to RC Frame Buildings. Journal of Structural Engineering, 143(8):04017066.
[6] Marjanishvili S, Agnew E. (2006). Comparison of various procedures for progressive collapse analysis. Journal of
Performance of Constructed Facilities. 20(4), 365-74.
[7] Pachenari A, Keramati A, Pachenari Z. (2013). Investigation of progressive collapse in intermediate RC frame
structures. The Structural Design of Tall and Special Buildings, 22(2), 116-25.
[8] Qian K, Li B, Zhang Z. (2016). Influence of multicolumn removal on the behavior of RC floors. Journal of Structural
Engineering. 142(5), 04016006.
[9] Hashemi Rezvani F, Behnam B, Ronagh HR, Alam MS. (2017). Failure progression resistance of a generic steel
moment-resisting frame under beam-removal scenarios. International Journal of Structural Integrity, 8(3), 308-325.
[10] Sasani M. (2008). Response of a reinforced concrete infilled-frame structure to removal of two adjacent columns.
Engineering Structures, 30(9), 2478-91.
[11] Song BI, Sezen H. (2013) Experimental and analytical progressive collapse assessment of a steel frame building.
Engineering Structures, 56, 664-72.
[12] Lalkovski N, Starossek U. (2016). Vertical building collapse triggered by loss of all columns in the ground story− Last
line of defense. International Journal of Steel Structures, 16(2), 395-410.
[13] Li Y, Lu X, Guan H, Ren P. (2016). Numerical investigation of progressive collapse resistance of reinforced concrete
frames subject to column removals from different stories. Advances in Structural Engineering, 19(2), 314-26.
[14] Arshian AH, Morgenthal G. (2017). Three-dimensional progressive collapse analysis of reinforced concrete frame
structures subjected to sequential column removal. Engineering Structures, 132, 87-97.
[15] Ashrafi, H., Hassanzadeh, S. (2017). Investigation of progressive collapse in reinforced concrete frames, considering
end rigid zones and various scenarios for column removal duration. Journal of Structural and Construction Engineering,
doi: 10.22065/jsce.2017.86030.1172
[16] Talaat,M., Mosalam, Kh. (2009). Modeling progressive collapse in reinforced concrete buildings using direct element
removal. Earthquake Engineering and Structural Dynamics, 38, 609-634.
[17] Khandelwal K., El-Tawil S. (2011). Pushdown resistance as a measure of robustness in progressive collapse analysis.
Engineering Structures, 33(9), 2653-61.
[18] Scott, MH., and Fenves, G. (2010). Krylov Subspace Accelerated Newton Algorithm: Application to Dynamic
Progressive Collapse Simulation of Frames. Journal of Structural Engineering, 136(5), 473-480.
[19] Wu.S.R, Gu.L. (2012). Introduction to the explicit finite element method for nonlinear transient dynamics, Hoboken,
Published: John Wiley & Sons, 335 pages.
[20] Building and Housing Research Center of the Islamic Republic of Iran (BHRC), (2015). Iranian code of practice for
seismic resistant design of buildings (standard No.2800). 4th edition, Tehran, BHRC.
[21] MRUD (Ministry of Roads and Urban Development of the Islamic Republic of Iran). (2013). Iranian national building
code, Part 9: Design and construction of reinforced concrete buildings. Tehran, MRUD.
[22] Livingston E., Sasani M., Bazan M., Sagiroglu S. (2015). Progressive collapse resistance of RC beams. Engineering
Structures, 95, 61-70.
[23] Scott, BD., Park, R. and Priestley MJN. (1982). Stress–strain behavior of concrete confined by overlapping hoops at
low and high strain rates. ACI Struct. J., 79(1), 13–27.
[24] Ghahremannejad M., Park Y. (2016). Impact on the number of floors of a reinforced concrete building subjected to
sudden column removal. Engineering Structures, 111, 11-23.
[25] Kim J, An D. (2009). Evaluation of progressive collapse potential of steel moment frames considering catenary action.
The structural design of tall and special buildings, 18(4), 455-65.
[26] Taucer, F.T., Spacone, E. and Filippou, F.C. (1991). A Fiber Beam–Column Element for Seismic Response Analysis of
Reinforced Concrete Structures, Report UCB/EERC-91/17, University of California, Berkeley.
[27] Kim HS, Kim J, An DW. (2009). Development of integrated system for progressive collapse analysis of building
structures considering dynamic effects. Advances in Engineering Software, 40(1), 1-8.
[28] Rahai A, Asghshahr MS, Banazedeh M, Kazem H. (2013). Progressive collapse assessment of RC structures under
instantaneous and gradual removal of columns. Advances in Structural Engineering, 16(10), 1671-82.
[29] Brunesi E, Nascimbene R. (2014). Extreme response of reinforced concrete buildings through fiber force-based finite
element analysis. Engineering Structures, 69, 206-15.
[30] Kazemi-Moghaddam, A. and Sasani, M. (2015). Progressive collapse evaluation of Murrah Federal Building following
sudden loss of column G20. Engineering Structures, 89, 162-171.
[31] Li M, Sasani M. (2015). Integrity and progressive collapse resistance of RC structures with ordinary and special
moment frames. Engineering Structures, 95, 71-9.
[32] Kordbagh B., Mohammadi M. (2017). Influence of seismicity level and height of the building on progressive collapse
resistance of steel frames. The Structural Design of Tall and Special Buildings. [online] 26(2), e1305. Available at:
http://onlinelibrary.wiley.com/doi/10.1002/tal.1305/full
[33] Zhang Q, Li Y. (2017). The Performance of Resistance Progressive Collapse Analysis for High-Rise Frame-Shear
Structure Based on OpenSees. Shock and Vibration, Available at: https://doi.org/10.1155/2017/3518232
[34] Weng J, Tan KH, Lee CK. (2017). Modeling progressive collapse of 2D reinforced concrete frames subject to column
removal scenario. Engineering Structures, 141, 126-43.
[35] Havaei G. (2017). Assessment of slidingârubber isolator effect in progressive collapse of bridges under two scenarios.
The Structural Design of Tall and Special Buildings. Available at: http://onlinelibrary.wiley.com/doi/10.1002/tal.1418/full
[36] Vamvatsikos D, Cornell CA. (2002). Incremental dynamic analysis. Earthquake Engineering & Structural Dynamics,
31(3), 491-514.
[37] Brunesi E, Nascimbene R, Parisi F, Augenti N. (2015). Progressive collapse fragility of reinforced concrete framed
structures through incremental dynamic analysis. Engineering Structures, 104, 65-79.
[38] Arshian AH, Morgenthal G, Narayanan S. (2016). Influence of modelling strategies on uncertainty propagation in the
alternate path mechanism of reinforced concrete framed structures. Engineering Structures, 110, 36-47.