[1] Muto, K. (1969). “Earthquake resistant design of 36-storied Kasumigaseki building”, In:4th World Conference on Earthquake Engineering. Santiago, Chile, pp.16-33.
[2] Muto, K., Ohmori, N., and Takahashi, T. (1973). “A study on reinforced concrete slitted shear walls for high-rise buildings”, In:5th World Conference on Earthquake Engineering. Rome, Italy.
[3] Martínez-Rueda, JE. (2002). “On the evolution of energy dissipation devices for seismic design Earthquake Spectra”, Journal of the Earthquake Engineering. Research Institute, EERI,18(2), pp.309–346.
[4] FEMA. (2000).Recommended seismic design criteria for new steel moment–frame buildings. FEMA-350. SAC Joint Venture.
[5] Hitaka, T., and Matsui, C. (2003). “Experimental study on steel shear sall with slits”, Journal of Structural Engineering ASCE, 129(5), pp.586-595.
[6] Hitaka, T., Matsui, C., and Sakai, J. (2007). “Cyclic tests on steel and concrete-filled tube frames with slit walls”, Earthquake Engineering and Structural Dynamics, 36, pp.707–727.
[7] Jacobsen, A., Hitaka, T., and Nakashima, M. (2010). “Online test of building frame with slit-wall dampers capable of condition assessment”, Journal of Constructional Steel Research, 66, pp. 1320–1329.
[8] Cortes, G., Liu, J. (2011). “Experimental evaluation of steel slit panel-frames for seismic resistance”, Journal of Constructional Steel Research, 32, pp. 181–191.
[9] Gou, L., Rong, Q., Xinbo, M., and Zhang, S. (2011). “Behavior of Steel Plate Shear Wall Connected to Frame Beams Only”, Journal of Constructional Steel Research, 11(4), pp.467-479.
[10] Rahmzadeh, A., Ghassemie, M., Park, Y., and Abolmaaili, A. (2016). “Effective of stiffeners on steel plate shear wall systems”, Steel and Composite Structures, 20(3), pp.545-569.
[11] Lu, J. Yan, L. Tang, Y. and Wang, H. (2015), "Study on Seismic Performance of a Stiffened Steel Plate Shear Wall with Slits", Shock and Vibration, 2015.
[12] Xiao, K. Zhang, Q. and Jia, B. (2016), "Cyclic behavior of prefabricated reinforced concrete frame with infill slit shear walls", Frontiers of Structural and Civil Engineering. 10(1), 63-71.
[13] Lu, J. Qiao, X. Liao, J. and Tang, Y. (2016), "Experimental Study and Numerical Simulation on Steel Plate Shear Walls with Non-uniform Spacing Slits", International Journal of Steel Structures. 16(4), 1373-1380.
[14] He, L., Togo, T., Hayashi, K., and Kurata, M. (2016). “Cyclic behavior of multirow slit shear walls made from low-yield-point steel”, Steel and Composite Structures, 20(3), pp.545-569.
[15] Jin, S., Jiulin, B., and Jinping, Q. (2017). “Seismic behavior of a buckling-restrained steel plate shear wall with inclined slots”, Journal of Constructional Steel Research, 129, pp.1-11.
[16] Gou, L., Rong, Q., Qu, .B, and Liu, J. (2017). “Testing of steel plate shear walls with composite columns and infill plates connected to beams only”, Engeenering Structures, 136, pp.165-179.
[17] Hoseinzadeh Asl M., Safarkhani, M. (2017). “Seismic behavior of steel plate shear wall with reduced boundary beam section”, Thin-Walled Structures, 116, pp.159-179.
[18] Jiang, L., Zheng, H., and Hu, Y. (2017). “Experimental seismic performance of steel- and composite steel-panel wall strengthened steel frames”, Civil and Mechanical Engineering, 17, pp.520-534.
[19] Khatami, M., Shariatmadar, H. (2017). “Experimental and analytical study of steel slit shear wall”, Steel and Composite Structures., 24(6), pp.741-751.
[20] Khatami, M., Shariatmadar, H. (2017). “Analytical study of steel slit shear wall”, Civil Engineering Sharif. [online]. Available at: http://sjce.journals.sharif.edu/article_1323.html [Accessed 21. June. 2018].
[21] Abaqus, (2014) Analysis user’s manual, Version 6.14, USA: Inc., Sassault Systemes.
[22] Hooputra, H., Gese, H., Dell, H., and Werner, H. (2004). “A comprehensive failure model for crashworthiness simulation of aluminum extrusions”, Journal of Crashworthiness, 9(5), pp.449-464.
[23] Shi, YJ., Wang, M., Wang, YQ. (2011). “Experimental and constitutive model study of structural steel under cyclic loading”, Constructional Steel Research, 67(8), pp.1185-1197.
[24] Krawinkler, H. (2009). “Loading histories for cyclic Tests in support of performance assesment of structural components”, Department of civil and Environ. Engineering, Stanford University, Stanford, CA.
[25] ATC-24, (1992). “Guidelines for cyclic seismic testing of components of steel structures for buildings”, Report No. ATC-24, Applied Technology Council, Redwood City, CA.