[1] Harries, K. A., Porter, M. L., and Busel, J. P. (2003). FRP materials and concrete ‐ search needs. Concrete International, 25 (10), 69‐74.
[2] Yao, J., et al. (2005). Experimental study on FRP-to-concrete bonded joints. Composites Part B: Engineering, 36 (2), 99-113.
[3] Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2002). FRP-strengthened RC structures. Chichester, U.K: Wiley.
[4] Matthys S. (2000). Structural behavior and design of concrete members strengthened with externally bonded FRP reinforcement. Ph.D. Thesis. Ghent University, Faculty of Applied Sciences department of Structural Engineering.
[5] ACI Committee 440. (2008). Guide for the Design and Construction of Externally Bonded FRP Systems forStrengthening Concrete Structures, ACI 440.2R-08 American Concrete Institute, Farmington Hills, MI.
6[ نادری، محمود، اسمعلی زاده، سیامک ) 1310 (. مقاومت نهایی تیرهای بتنی تقویت شده با [ FRP در شرایط دمای بالا و یخ زدگی.
- 02 31 ،)1( نشریه مهندسی عمران امیرکبیر، 40 .
[7] Di Tommaso, A., Neubauer, U., Pantuso, A., and Rostásy, F. S. (2001). Behavior of adhesively bonded concrete-CFRP joints at low and high temperatures. Mechanics of Composite Materials, 37 (4), 327-338.
[8] Klamer, E. (2006). The influence of temperature on concrete structures strengthened with externally bonded CFRP. Report No. O-2006. 04, Eindhoven University of Technology, Department of Architecture, Building and Planning, Structural Design and Construction Technology, Concrete Section.
[9] Klamer, E. (2009). Influence of temperature on concrete beams strengthened in flexure with CFRP. Ph.D. thesis. Eindhoven Univ. of Technology, Eindhoven, Netherlands.
[10] Leone, M., Matthys, S., and Aiello, M. A. (2009). Effect of elevated service temperature on the bond between FRP EBR systems and concrete. Compos. Part B: Eng, 40 (1), 85–93.
[11] Arruda, M. R. T., et al. (2016). Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures. Engineering Structures. 110(Supplement C), 233-243.
[12] Chung J. (2006). Nanoscale characterization of epoxy interphase on copper microstructures. PhD thesis. TU Berlin. available from URL: http://nbnresolving.de/urn:de:kobv:83-opus-12637.
[13] Ernst L. Klamer & Dick A. Hordijk. (2008). The influence of temperature on RC beams strengthened with externally bonded CFRP reinforcement. HERON, 53 (3), 157-186.
[14] Jankowiak, T. and Lodygowski, T. (2005). Identification of parameters of concrete damage plasticity constitutive model. Foundations of civil & environmental, 6, 53-69.
[15] Obaidat, Y. T., et al. (2010). The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM. Composite Structures, 92 (6),1391-1398.
[16] Hibbitt, Karlsson, and Sorensen, Inc. (2000). ABAQUS Theory manual, User manual and Example Manual, Version 6.7. Providence, RI.
[17] Wahalathantri, B.L., Thambiratnam, D.P., Chan, T.H.T., & Fawzia, S. (2011). A material model for flexural crack simulation in reinforced concrete elements using ABAQUS. In Proceedings of the First International Conference on Engineering. Designing and Developing the Built Environment for Sustainable Wellbeing, Queensland University of Technology, Brisbane, 260-264.
[18] Benzeggagh, M., and M. Kenane. (1996). Measurement of Mixed-Mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-Mode Bending Apparatus. Composite Science and Technology, 56, 439-451.
[19] ACI Committee 318. (1999). Building code requirements for structural concrete and commentary (ACI 318-99). Detroit (MI): American Concrete Institute.
[20] Mark,P.and Bender,M. (2010). Computational modeling of failure mechanisms in reinforced concrete structures. Architecture and Civil Engineering, 8 (1), 1-12.
[21] Saenz, LP. (1964). Discussion of equation for the stress-strain curve of concrete. ACI Journal, 61, 1229–1235.
[22] Piggott M. (2002). Load bearing fibre composites. 2nd ed. Boston/Dordrecht/ London: Kluwer Academic Publishers.
[23] Lu XZ, Ten JG, Ye LP, Jaing JJ. (2005). Bond-slip models for FRP sheets/plates bonded to concrete. Eng Struct, 24 (5), 920–37.