[1]Bekdas, G. and Nigdeli, S. M. (2011). Estimating optimum parameters of tuned mass dampers using harmony search.Engineering Structures, 33, 16–23.
[2]Mohebbi, M. and Joghattai, A. (2012). Designing optimal tuned mass dampers for nonlinear frames by distributed genetic algorithms.Structural Design of Tall and Special Buildings, 21, 57–76.
[3]Soheili, S. and Farshidianfar, A. (2013). Ant colony optimization of tuned mass dampers for earthquake oscillations of high-rise structures including soil–structure interaction.Soil Dynamics and Earthquake Engineering, 51, 14–22. [4] Özsariyildiz S. S. and Bozer A. (2015). Finding optimal parameters of tuned mass dampers. The Structural Design of Tall and Special Buildings, 24(6), 461-475.
[5] Bekdas, G. and Nigdeli, S. M. (2017).Metaheuristic based optimization of tuned mass dampers under earthquake excitation by considering soil-structure interaction. Soil Dynamics and Earthquake Engineering, 92, 443-462.
[6]Casciati, F. and Giulani, F. (2009). Performance of multi-TMD in the towers of suspension bridges.Journal of Vibration and Control, 15,821–47.
[7]Rahman, M. S., HassanM. K. and Chung,S. (2017). Adaptive multiple tuned mass dampers based on modal parameters for earthquake response reduction in multi-story buildings. Advances in Structural Engineering, 20(9), 1375–1389. [8]Li, C. and Cao,B. (2015). Hybrid active tuned mass dampers for structures under the ground acceleration. Structural Control and Health Monitoring, 22(4), 757–773.
[9]Sun,C. andNagarajaiah, S.(2014). Study on semi-active tuned mass damper with variable dampingand stiffness under seismic excitations.Structural Control and Health Monitoring, 21, 890–906.
[10] Lacarbonara, W. and Vestroni, F. (2002). Feasibility of a vibration absorber based on hysteresis. Proceedings of the Third World Congress on Structural Control, Como, Italy.
[11] Rudinger, F. (2006). Optimal vibration absorber with nonlinear viscous power law damping and white noise excitation.Journal of Engineering Mechanics, ASCE, 132, 46–53.
[12] Chung, L., Wu, L., Huang, H. H., Chang, C. H. and Lien, K. H. (2009). Optimal design theories of tuned mass damper with nonlinear viscous damping.Earthquake Engineering and Engineering Vibration, 8,547–60.
[13]Eason, R.P., Sun, C., Dick, A.J. and Nagarajaiah,S. Attenuation of a linear oscillator using a nonlinear and a semi-active tuned mass damper in series. Journal of Sound and Vibration, 332(1), 154-166.
[14]Bhowmick, S. and Mishra, S. K. (2014). Shape Memory Alloy-Tuned Mass Damper (SMA-TMD) for Seismic Vibration Control.Advances in Structural Engineering, DOI: 10.1007978-81-322-2193-7_108.
[15] Huang, Haoyu., Chang, Wen-Shao. and Mosalam, Khalid. M. (2016). Feasibility of shape memory alloy in a tuneable mass damper to reduce excessive in-service vibration.Structural Control and Health monitoring, DOI: 10.1002/stc.1858.
[16] Sarawate,N. N. and Dapino, M. J. (2009). Dynamic sensing behavior of ferromagnetic shape memory Ni–Mn–Ga.Smart Material and Structures, 18(10), 104014(6pp).
[17] Savi, M. A., Paula, A. S. D.and Lagoudas, D. C. (2011). Numerical Investigation of an Adaptive Vibration Absorber Using Shape Memory Alloys. Journal of Intelligent Material Systems and Structures, 22(1), 67-80.
[18] Jose. S,, Chakraborty, G. and Bhattacharyya, R. (2017). Coupled thermo-mechanical analysis of a vibration isolator made of shape memory alloy.International Journal of Solids and Structures, DOI: 10.1016/j.ijsolstr.2017.03.001.
[19] Nayefeh, A. H. and Mook, D. T. (1995). Nonlinear oscillations, New York, John Willey & Sons, Inc.
[20] Gendelman, O., Gourdon, E. and Lamarque, C. (2006). Quasi-periodic energy pumping in coupled oscillators under periodic forcing.Journal of Sound and Vibration, 294 (4–5), 651–662.
[21] Starosvetsky. Y, and Gendelman, O. (2009). Vibration absorption in systems with a nonlinear energy sink, nonlinear damping.Journal of Sound and Vibration, 324(3–5), 916–939.
[22] Sun, C., Eason, R. P., Nagarajaiah, S. and Dick, A. J. (2013). Hardening Duffing oscillator attenuation using a nonlinear TMD, a semi-active TMD and multiple TMD.Journal of Sound and Vibration, 332, 674–686.
[23] Carpineto, N., Lacarbonara, W. and Vestroni, F. (2014). Hysteretic tuned mass dampers for structural vibration mitigation.Journal of Sound and Vibration, 333(5), 1302-1318.
[24] Ozbulut, O. E., Hurlebaus, S. and Desroches, R. (2011). Seismic Response Control Using Shape Memory Alloys, A Review.Journal of Intelligent Material Systems and Structures, 22, 1531-1549.
[25] Graesser, E. J. and Cozzarelli, F. A. (1994). A proposed three-dimensional constitutive model for shape memory alloys.Journal of Intelligent Material Systems and Structures, 5, 78–89.
[26] Wen, Y. K. (1980). Equivalent linearization for hysteretic systemsunder random excitation. Journal of Applied Mechanics, 47, 150–154.
[27]Dolce, M. and Cardone, D. (2001). Mechanical behavior of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension.International Journal of Mechanical Sciences, 43:2657–2677.
[28] Motahari, S. A. and Ghassemieh, M. (2007). Multilinear one-dimensional shape memory material model for use in structural engineering applications. Engineering Structures, 29: 904–913.
[29]Chopra, A. K. (2007). Dynamics of structures Theory and Applications to Earthquake Engineering, 3d Edition.New York, prentice Hall
[30]MATLAB and Statistics Toolbox (2012), the Math Works, Inc., Natick, Massachusetts, United States.
[31] Lacarbonara, W. and Vestroni, F. (2003). Nonclassical responses of oscillators with hysteresis.Nonlinear Dynamics, 32:235–258.
[32]Dhooge, A., Govaerts, W. and Kuznetsov, Y. A. (2003). MATCONT: A MATLAB package for numerical bifurcation analysis of ODEs. ACM Transaction of Mathematical Software, 29, 141–164.
[33]Federal Emergency Management Agency (FEMA) (2005). Improvement of nonlinear static seismic analysis procedure. Report FEMA 440, Washington, DC.