[1]Mundra, P., K. Desai, and S. Lele, Application of response surface methodology to cell immobilization for the production of palatinose. Bioresource Technology, 2007. 98(15): p. 2892-2896.
[2]Verran, G., R. Mendes, and L. Dalla Valentina, DOE applied to optimization of aluminum alloy die castings. Journal of materials processing technology, 2008. 200(1): p. 120-125.
[3]El-Dieb, A.S., Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers. Materials & Design, 2009. 30(10): p. 4286-4292.
[4]Shi, X., et al., Durability of steel reinforced concrete in chloride environments: An overview. Construction and Building Materials, 2012. 30: p. 125-138.
[5]Farahani, A., H. Taghaddos, and M. Shekarchi, Prediction of long-term chloride diffusion in silica fume concrete in a marine environment. Cement and Concrete Composites, 2015. 59: p. 10-17.
[6]Basheer, L., J. Kropp, and D.J. Cleland, Assessment of the durability of concrete from its permeation properties: a review. Construction and building materials, 2001. 15(2): p. 93-103.
[7]Eskandari, H., A.M. Nic, and A. Ghanei, Effect of Air Entraining Admixture on Corrosion of Reinforced Concrete. Procedia Engineering, 2016. 150: p. 2178-2184.
[8]Abrams, D.A. Tests of impure waters for mixing concrete. in Journal Proceedings. 1924.
[9]Narver, D., Good concrete made with coral and water. Civil Engineering, 1964. 24: p. 654-658.
[10]Griffin, D.F. and R.L. Henry, The effect of salt in concrete on compressive strength, water vapor transmission, and corrosion of reinforcing steel. 1962, NAVAL CIVIL ENGINEERING LAB PORT HUENEME CA.
[11]Praveen, K. and R. Krishna, Strength and workability of cement mortar with manufactured sand. International Journal of Research in Engineering and Technology, 2015. 4: p. 186-89.
[12]Feret, R., Essais de divers sables et mortiers hydrauliques. Ann. Ponts Chauss. Mémoires et Documents, 1896. 7: p. 174-197.
[13]Rao, G.A., Generalization of Abrams' law for cement mortars. Cement and Concrete Research, 2001. 31(3): p. 495-502.
[14]Haach, V.G., G. Vasconcelos, and P.B. Lourenço, Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars. Construction and Building Materials, 2011. 25(6): p. 2980-2987.
[15]De Schutter, G. and A.-M. Poppe, Quantification of the water demand of sand in mortar. Construction and Building Materials, 2004. 18(7): p. 517-521.
[16]Razak, H.A., H. Chai, and H. Wong, Near surface characteristics of concrete containing supplementary cementing materials. Cement and Concrete Composites, 2004. 26(7): p. 883-889.
[17]Kolias, S. and C. Georgiou, The effect of paste volume and of water content on the strength and water absorption of concrete. Cement and Concrete Composites, 2005. 27(2): p. 211-216.
[18]Kostić, S., N. Vasović, and D. Sunarić, A new approach to grid search method in slope stability analysis using Box–Behnken statistical design. Applied Mathematics and Computation, 2015. 256: p. 425-437.