Effect of Microsilica Additive on Compressive Strength and Water Absorption of Lightweight Concrete

Document Type : Original Article

Authors

1 Department of Civil Engineering, Faculty member of Civil Engineering, NajafAbad Branch, Islamic Azad University, NajafAbad, Iran

2 Department of Civil Engineering, NajafAbad Branch, Islamic Azad University, NajafAbad, Iran

3 Department of Civil Engineering, Faculty member, DehaghanBranch, Islamic Azad University, Dehaghan, Iran

Abstract

Concerning the issue of the seismicity of Iran and the effect of structure weight on the amount of earthquake load exerted on the structure, there is the need for stylization of structures in order to reduce the costs of designing and repairing structures against earthquakes. It is possible to build structural light-weight concrete by using different additive materials. Microsilica is of the additives of concrete, which is of a significant role in improving concrete characteristics. In this paper, as regards to the positive influence that the additive material puts on the concrete compressive strength, it has been used as a replacement of a part of the cement used in the concrete mix design. Investigation of the compressive strength of light-weight concrete with microsilica contents of 4, 8, and 12 weight percentage of cement at the ages of 28, 118, and 148 days and the water absorption of 90-day samples have been performed through experimental study. It was observed by investigating the compressive strength and the obtained results that using microsilica up to 12% leads to increase compressive strength relative to the control sample. The optimal amount of the used microsilica at all ages is equal to 8% of cement weight. In addition, by increasing of the consumable microsilica up to 12%, the concrete water absorption is reduced as compared to the control sample, and finally causes to reduce the porosity of the light-weight concrete. All the experiments during this study have been performed at the concrete laboratory of the civil engineering faculty of Islamic Azad University, Najaf Abad Branch.

Keywords

Main Subjects


[1] ACI Committee 213; "Guide for Structural Lightweight-aggregate Concrete"; American Concrete Institute, 2014.
[2] Shakarchizadeh; M; Alilibar; N; Jalili; M; "Handbook for lightweight aggregate concrete"; Elm-o-Adab Publication, First edition, Tehran, 2016.
[3] Ramazanianpour; A; Peydayesh; M; "Concrete durability and the role of pozzolanic cements"; Publication of Building and Housing Research Center, Publication No. 274, First edition, Winter 1997.
[4] Bagheri; A; "heat-generating of concrete containing microsilica"; Proceedings of the International Seminar on the Application of Silica Soot in Concrete, Building and Housing Research Center, Tehran, April 1997.
[5] Novokshchenov; V; Whitcomb; W; "How to Obtain High Strength Concrete Using Low Density Aggregate"; ACI SP, USA, 1990, pp. 121-133.
[6] Khaloo; A.R; Houseinian; M.R;''Evaluation of properties of silica fume for use in Concrete"; International Conference on Concretes. Dundee, Scotland,1999.
[7] Mazloom; M; Ramezanianpour; A.A; Brooks, J.J; "Effect of Silica Fume on Mechanical Properties of High-Strength Concrete"; Cement & Concrete Composites, Vol. 26, 2004, pp. 347-357.
[8] Shayan; A; Xu; A; "Performance of Glass Powder as a Pozzolanic Material in Concrete: A Field Trial on Concrete Slabs"; J. Cement and Concrete Research, vol.36, 2006, pp.457–468.
[9] HosseinAli Beigi; M; Hosseinian; S.B; Shafigh; Payam; "building high-strength light-weight concrete using light-weight aggregates, rock powder, and microsilica"; Engineering Faculty Publication, vol. 19, 2007, no. 1 (Civil Engineering), pp. 127-134.
[10] Sajedi; F; Shafigh; P; "High Strengh Lightweight Concrete Using Leca, Silica Fume, and Limestone"; Arabian Journal for Science and Engineering, Vol. 37, 2012, pp. 1885-1893.
[11] Youm; K.S; Moon; J; Young Cho; J; Kim,; J.J; "Experimental Study on Strength and Durability of Lightweight Aggregate Concrete Containing Silica Fume"; Construction and Building Materials, Vol. 114, 2016, pp. 517-527.
[12] www.ardestancement.com
[13] First stage report of evaluating microsilica of Iran's ferrosilis Factory and its application in concrete, Building and Housing Research Center, 1997.
[14] Mohammadi Tehrani, F; "Comprehensive Manual of Leca"; Leca Company, Tehran, 1998.
[15] ASTM; C; 109/C 109M-02; "Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens)"; ASTM