[1] U. S. General Services Administration. (2003). Progressive collapse analysis and design guidelines for new federal office building and major modernization projects, Washington, DC.
[2] Department of Defence (DOD). (2010). unified facilities criteria (UFC): Design of structures to resist progressive collapse, Washington (DC).
[3] ASCE 7-05 (2005). Minimum design loads for buildings and other structures. American Society of Civil Engineers (ASCE).
[4] Building Code Requirements for Structural Concrete ACI 318-05 and Commentary-ACI 318R-05, (2005). American Concrete Institute, Farmington Hills, Michigan.
[5] Szyniszewski, S. (2009). Probabilistic approach to progressive collapse prevention. Structures 2009: Don’t Mess with Structural Engineers, ASCE, 2836-2843.
[6] Jinkoo, J., Lee, Y. and Choi, H. (2009). Progressive Collapse resisting capacity of braced frames. The Structural Design of Tall and Special Buildings.
[7] Park, J. and Kim, J. (2010). Fragility analysis of steel moment frames with various seismic connections subjected to sudden loss of a column”, Engineering Structures, 1547-1555.
[8] Liu, M. (2011). Progressive collapse design of seismic steel frames using structural optimization. Journal of Constructional Steel Research, 322–332.
[9] Szyniszewski, S. and Krauthammer, T. (2012). Energy flow in progressive collapse of steel framed buildings. Engineering Structures, 142–153.
[10] Hadianfard, M.A. and Wassegh, M. (2012). Linear and nonlinear analysis of progressive collapse for seismic designed steel moment frames. 14th international Conference on Community in Civil and Building Engineering.
[11] Morouri, S. and Hadidi, A. (2012). Assessment the behaviour of 3D steel moment frames subjected to progressive collapse by nonlinear dynamic procedure. Trends in Advanced Science and Engineering.
[12] Ruirui, S., Zhaohui, H. and Ian, B. (2013). Progressive collapse analysis of steel structures under fire conditions. PhD Research Student, Department of Civil and Structural Engineering, the University of Sheffield, Sheffield.
[13] Kim, J. and Jung, M.K. (2013). Progressive collapse resisting capacity of tilted building structures. The Structural Design of Tall and Special Buildings, 1359-1375.
[14] Tavakoli, H. and Rashidi Alashti.A (2013). Evaluation of progressive collapse potential of multi-story moment resisting steel frame buildings under lateral loading. Sharif University of Technology, Scientia Iranica. 20(1), 77-86.
[15] Nateghi, F.A. and Parsaeifard, N. (2013) Studying the effect of initial damage on failure probability of one story steel buildings. Iranica Journal of Energy & Environment 4{(3) Geo-hazard and civil Engineering}:258-264.
[16] Mashhadiali, N. and Kheyroddin, A. (2014). Progressive collapse assessment of new hexagrid structural system for tall buildings. Structural Design of Tall and Special Buildings, 947–961.
[17] Tu, B. and Zhao, D. (2014). Judgment of key components during progressive collapse. Electronic Journal of Geotechnical Engineering (EJGE).
[18].Hosseini, M., Fanaie, N. and Yousefi, A.M. (2014). Studying the vulnerability of steel moment resistant frames subjected to progressive collapse, Indian Journal of Science and Technology, 335-342.
[19] Karimiayan, S., Moghadam, A.S. and Husseinzadeh Kashan, A. and Karimiyan, M. (2015). Progressive collapse evaluation of RC symmetric and asymmetric mid-rise and tall buildings under earthquake loads. International Journal of Civil Engineering, Vol.13, NO.1, Transaction A: Civil Engineering.
[20] INBC. (2013). Design and Construction of Steel Structures. Tehran: Ministry of Housing and Urban Development, Iranian National Building Code, Part 10. (In Persian).
[21] Ibarra, L., Medina, R. and Krawinkler, H. (2002). Collapse assessment of deteriorating SDOF systems. Proceedings of the 12th European Conference on Earthquake Engineering, London, UK, Paper 665, Elsevier Science Ltd.
[22] Ibarra L. F., Medina R. A. and Krawinkler H., (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthquake Engineering and Structural Dynamics, 34(12), pages. 1489-1511.
[23] Lignos, D.G. and Krawinkler, H. (2009). Side-sway collapse of deteriorating structural systems under seismic excitations. Report no. TB 172. Stanford (CA): John A. Blume Earthquake Engineering Research Centre. Department of Civil and Environmental Engineering, Stanford University, 1-12.
[24] Lignos, D.G. and Krawinkler, H. (2011). Deterioration modelling of steel components in support of collapse prediction of steel moment frames under earthquake loading, Journal of Structural Engineering, 137 (11), 1291-1302.
[25] Lignos, D.G. and Krawinkler, H. (2010). A steel database for component deterioration of tubular hollow square steel columns under varying axial load for collapse assessment of steel structures under earthquakes. In Proceedings of the 7th International Conference on Urban Earthquake Engineering (7CUEE), Tokyo, Japan.
[26] INBC. (2013). Design and Construction of Steel Structures. Tehran: Ministry of Housing and Urban Development, Iranian National Building Code, Part 10. (In Persian).
[27] INBC. (2013). Design Loads for Buildings. Tehran: Ministry of Housing and Urban Development, Iranian National Building Code, Part 6. (In Persian).
[28] BHRC. (2014). Iranian code of practice for seismic resistant design of buildings. Tehran: Building and Housing Research Centre, Standard No. 2800. (In Persian).
[29] Lignos, D.G. and Krawinkler, H. (2010). A steel database for component deterioration of tubular hollow square steel columns under varying axial load for collapse assessment of steel structures under earthquakes. In Proceedings of the 7th International Conference on Urban Earthquake Engineering (7CUEE), Tokyo, Japan.
[30] Lignos, D.G. and Krawinkler, H. (2007). A database in support of modelling of component deterioration for collapse prediction of steel frame structures. In Proceeding of the ASCE Structures Congress, Long Beach CA, SEI institute.
[32] Lignos, D.G. and Krawinkler, H. (2012). Development and Utilization of Structural Component Databases for Performance-Based Earthquake Engineering. Journal of Structural Engineering, 139 (8), 1382-1394.
[33] Shanmugam, N.E. and Ting, L.C. (1995). Welded interior box-column to I-beam connections. Journal of Structural Engineering, 824-830.
[34] Mazzoni, S. and Mckenna, F., Scott, M. H. and Fenves, G. L. (2006). OpenSEES Command Language Manual. http://OpenSEES. Berkeley.edu/OPENSEES/manuals/user manual/OpenSEES Command Language Manual June 2006.pdf.
[35] FEMA P 695. (2009). Quantification of Building Seismic Performance Factors. Washington, D.C. Federal Emergency Management Agency, USA.
[36] FEMA 356. (2000). Pre-Standard and Commentary for the seismic Rehabilitation of Buildings. Washington D.C. Federal Emergency Management Agency, USA.