[1] Sepahvand, M., Yamini Fard, F. and Javan Doloee, Gh. (2012). Analysis of earthquake aftershocks at 31 march in Silakhor (moment magnitude 6/1) based on the recorded data in temporary local seismic network. Journal of Geophysics, Volume 6 (4), Pages (73-84).
[2] The organization of Cultural Heritage in Lorestan. (2007). Investigation and restoration project of Imamzadeh Jafar Borujerd. Borujerd: The organization of Cultural Heritage in Lorestan, page (225).
[3] Danieli1, M. and Aronchik, A. and Bloch, J. (2014). An orginal method for strengtheting in ancient stone domes in seismic regions and solving corresponding problems of stress strain state analysis. International Journal of Research in Engineering and Technology, Volume 3(10), Pages (10-15).
[4] Kamal, O.A. and Hamdy, G.A. and El-Salakawy, T.S. (2014). Nonlinear analysis of historic and contemporary vaulted masonry assemblages. Housing and Building National Research Center HBRC Journal, Volume (10), Pages (236-246).
[5] Ayub, M. and Ali, Q. and Shahzada, k. and Naseer, A. and Shoaib, M. (2013). Conservation of Islamia College Building in Pakistan. In: The 2nd International Conference on Rehabilitation and Maintenance in Civil Engineering. Indonesia: Elsevier, Pages (465 – 471).
[6] Moeeni, M. and Sahab, MG. (2013). Studying Effect of Expansive Material in Retrofitting of Masonry Domes in Historical Buildings. World Applied Sciences Journal, Volume 26 (4), Pages (548-552).
[7] Paolo Foraboschi, P. (2013). Church of San Giuliano di Puglia: Seismic repair and upgrading. Engineering Failure Analysis Jurnal, Volume (33), Pages (281–314).
[8] Rashadul, I. and Climent, M. (2008). Inventory of FRP strengthening methods in masonry structures. Barcelona: Department of Construction technical university of Catalonia, Pages (1-131).
[9] Celik, O.C. and Sesigur, H. and Cili, F. (2008). Seismic evaluation and retrofit of a 16th century historic brick masonry dome in Istanbul using combined steel rings and CFRP sheets. In: The 14th Worth Conference on Earthquake Engineering. China: Beijing, Pages (10-19).
[10] Mortezae, A. and Kheiredin, A. (2010). Seismic retrofitting monument mosque in Semnan. In: Fourth National Congress of Civil Engineering. Tehran:Tehran University, pages (13-23).
[11] Federal Emergency Management Agency. (2000). Prestandard and commentary for the seismic rehabilition of buildings. Reston, Virginia: American society of civil engineers, Page (7-6).
[12] Hemant B. and Kaushik, Durgesh C. Rai. and Sudhir K. Jain. (2007). Uniaxial compressive stress – strain model for clay brick masonry. Kanpur: Department of Civil Engineering, Indian Institute of Technology Kanpur, Pages(497-501) [13] Ministry of Road & urban Development. (2013). National building code issues, part 6, Design Loads for Buildings. Tehran: Tosseh iran publisher, Pages (121-26). [14] Ministry of Road & urban Development. (2013). National building code issues, part 9, implementation of reinforced concrete buildings. Tehran: Tosseh iran publisher, Page (184).
[15] Iranian Seismological Center, (2006) Receive earthquake information. Available at:
http://irsc.ut.ac.ir
[16] Shahbazi, R. and yekrangniya, M. (2014). Abaqus Applide Manual with Examples for Civil Engineering. Tehran: elme omran, Page (206)
[17] Standing Committee on the Review of Building Regulations against Earthquake. (2014). Iranian code of practice for seismic resistant design of buildings. Standard No.2800. 4th edition. Tehran: Road, Housing & Urban Development Research Center, Page (135).
[18] Trifunac M.D and Brady A.G. (1975). A study on the duration of strong earthquake ground motion. Bulletin of Seismological Society of America, volume (65), pages (581-626).