[1] Akkar, S.; Sucuoglu, H. and Yakut, A. (2005), “Displacement based fragility functions for low- and mid-rise ordinary concrete buildings", Earthquake Spectra, 21(4), pp. 901-927.
[2] Anagnos, T.; Rojahn, C. and Kiremidjian, A.S. (1994). “Building fragility relationships for California", Proceedings of the Fifth U.S. National Conference on Earthquake Engi Engineering, pp. 389-396
[3] Kennedy, R.P.; Cornell, A.C.; Campbell, R.D.; Kaplan, S. and Perla, H.F. (1980). “Probabilistic seismic safety study of an existing nuclear power plant", Nuclear Eng. & Design, 59(2).
[4] Kircher , C.A. and Martin W, " Development of fragility Curve for Estimating of Earthquake Damage Work Shopon Continuing Action to Reduce losses from Earthquake , Washington ,Dc : U.S.Geological Survey. (1993).
[5] Anagnos, T.; Rojahn, C. and Kiremidjian, A.S. “Building fragility relationships for California”, Proceedings of the Fifth U.S. National Conference on Earthquake Engineering, pp. 389-396 (1994).
[6] Anagnos , T.Rojahn , C.and Kiremidjiam, “ATC joint Study on Fragility Of Building",NCEER-95-0003, Applied Technology Council ,CA.(1995).
[7] Satoshi TANAKA, Hiroyuki KAMEDA, Nobuoto NOJIMA, Shunsuke OHNISHI, (2000). “Evalution of Seismic Fragility for Highway Transportation System”, publisher:12WCEE.
[8] Murao, O. and Yamazaki, F. “Development of fragility curves for buildings in Japan”, Confronting Urban Earthquakes: Report of Fundamental Research on theMitigation of Urban Disasters Caused by Near-Field Earthquakes, pp. 226-230 (2000).
[9] Smyth, A. “Probabilistic bene_t-cost analysis for earthquake damage mitigation: Evaluating measures for apartment houses in Turkey", Earthquake Spectra, 20(1), (February 2004).
[10] Aziminejad, A.S. and Moghadam,A. (June 2007). “Effects of strength distribution on fragility curves of asymmetric single story building”, Proceedings of the Ninth Canadian Conference on Earthquake Engineering Ottawa, Ontario, Canada.
[11] Mohammad Barkhordary And Saeed Tariverdilo , (2011) 10 , “Vulnerability of ordinary moment resistant concrete frames” , Earthq Eng & Eng Vib , pp. 519-533
[12] Mark Adom-Asamoah, (16 May, 2012), “Generation of analytical fragility curves for Ghanaian non-ductile reinforced concrete frame buildings”, International Journal of the Physical Sciences Vol. 7(19), pp. 2735-2744.
[13] Frank J. Vecchio; Mohamed Basil Emara; “Shear Deformation in Reinforced Concrete Frames”; ACI Structural Journal ;V 89, No 1 , 1992
[14] Standard No.2800-05. (2005). “Iranian code of practice for seismic resistant design of buildings.” Third ed., Building and Housing Research Center, BHRC publication, Tehran, Iran
[15] Office of National Building Regulations. (2009). “Topic ninth national building regulations.” Design and implementation of concrete buildings, Tehran, Iran.
[16] HAZUS-MH MR5, Multi-Hazard loss Estimation Methodology: Earthquake Model. (2003), Depariment of Homeland security, FEMA, Washington, D.C,
[17] Mazzoni, S; McKenna, F; Scott, M.H; Fenves, G.L; & Jeremic B; (2007). “OpenSEES Command Language Manual”.
[18] Elnashai, A.S., Pinho, R. and Antoniou (2000), “INDYAS – A Program for Inelastic Dynamic Analysis of Structures,” Research Report ESEE/00-2, Engineering Seismology and Earthquake Engineering Section, Imperial College, London.
[19] Mander J.B., Priestley M.J.N., Park R. (1988). “Theoretical Stress-Strain Model for Confined Concrete”. Journal of Structural Engineering, publisher: ASCE.
[20] Shome N, Cornell CA, (1999). Probability seismic demand analysis of nonlinear structures Ph.D, dissertation. Stanford University.
[21] FEMA. Quantification of building seismic performance factors. FEMA P695. (June 2009), Federal Emergency Management Agency, Washington, DC.
[22] Nielson, B.G, (2005). “Analytical Fragility curves for highway bridges bridges in moderate seismic zones”, A Thesis presented for PHD degree. School of civil and environmental engineering Georgia institute of Technology, 400 pp,
[23] Cornell, A. C., Jayaler, F., Hamburger, R. O., and Foutch, A. D. (2002). “Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines.” J. Struct. Eng., 10.1061/ (ASCE)0733-9445(2002)128:4(526), 526–533
[24] Code No. 360, 2007, Islamic Republic of Iran, Management and Planning Organization, Instruction for Seismic Rehabilitation of Existing Buildings.
[25] Abdollahzadeh, G., & Shahaky, M. (2011). Probabilistic seismic hazard assessment of Babol, Iran. Iranian Journal of Energy & Environment, 2, 274-285.
[26] Pahlavan, H., Zakeri, B., Amiri, G. G., & Shaianfar, M. (2015). Probabilistic vulnerability assessment of horizontally curved multiframe RC box-girder highway bridges. Journal of Performance of Constructed Facilities, 30(3), 04015038.