[1] Astaneh-Asl A., Zhao Q., (2002) “Cyclic Behavior of Traditional and an Innovative Composite Shear Wall” Report No. UCB-Steel-o1/2002, Department of Civil and Env. Engineering, University of California, Berkeley.
[2] Rahai A., Hatami F., (2009), “Evaluation of composite shear wall Behavior under cyclic loadings”, Journal of Constructional Steel Research. Vol. 65. Pp.1528-1537.
[3] Driver, R.G., Kulak, G. L., Kennedy, D.J.L. and Elwi, A.E. (1998); Cyclic tests of four-story steel plate shear wall; J. of Structural Eng., ASCE, Vol. 124, No. 2, Feb., pp. 112-120.
[4] Kulak, G. L., Fisher, J. W., and Struik, J. H. A. (1987); Guide to Design Criteria for Bolted and Riveted Joints, John Wiley and Sons, New York.
[5] Kulak, G.L. (1991); Unstiffened steel plate shears walls, Applied Science Publications, London, pp. 237-276.
[6] Timler, P.A. and Kulak, G.L., (1983); Experimental Study of Steel Plate Shear Walls, Structural Eng. Report No. 114, Dep. of Civil Eng., University of Alberta, Edmonton, AB.
[7] Nakashima, M., Akawaza, T., Tsuji, B. (1995); Strain-Hardening Behavior of Shear Panels Made of Low-Yield Steel. II: Model, J. of Structural Eng., ASCE, 121(12), pp. 1750-1757.
[8] Driver RG, Abbas HH, Sause R. Local buckling of grouted and ungrouted internally stiffened double-plate HPS webs. Journal of Constructional Steel Research 2002;58:881_906.
[9] De Matteis G, Landolfo R, Mazzolani FM. Seismic Response of MR steel frames with low-yield steel shear panels. Journal of Engineering Structures 2003; 25(2):155_68.
[10] Bruneau M, Bhagwagar T. Seismic retrofit of flexible steel frames using thin infill panels. Journal of Engineering Structures 2002;24(4):443_53.
[11] Berman JW, Bruneau M. Steel plate shear walls are not plate girders. AISC Engineering Journal, Third quarter-95 2004.
[12] Ryu HK, Chang SP, Kim YJ, Kim BS. Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments. Engineering Structures 2005;(27):1613_24.
[13] Alinia MM. A study into optimization of stiffeners in plates subjected to in-plane shear loads. Thin-Walled Structures 2005;43(4):845_60.
[14] Alinia MM, Dastfan M. Behaviour of thin steel plate shear walls regarding Frame members. Journal of Constructional Steel Research 2006;62:730_8.
[15] Wenwu Lan., Jiaxing Ma, Bing Li., (2015) “Seismic performance of steel–concrete composite structural walls with internal bracings”, Journal of Constructional Steel Research. Vol. 110. pp.76-89.
[16] Kai Z., Amit H., Sanjeev R., Stewart G., (2014), “Effect of shear connectors on local buckling and composite action in steel concrete composite walls”, Journal of Constructional Steel Research., Vol. 269, pp.231-239.
[17] Kanchi, M., 1996. Experimental study on a concrete filled steel structure Part.2 Compressive Tests (1). In: Summary of Technical Papers of Annual Meeting, Architectural Institute of Japan, Structures, pp. 1071–1072.