[1] Camanho, P and Natthews, F. (1997). Stress analysis and strength prediction of mechanically fastened joints in FRP. Composites part A, 28 A,529-47.
[2]. Hart-Smith, L. (2006). Adhesive bonding of composite structures: progress to date and some remaining challenges. J Compos Technol Res, 24(3),133-53.
[3] Kelly, G. (2006). Quasi-static strength and fatigue life of hybrid (bonded/ bolted) composite single- lap joints. Compos Struct,2:119-29.
[4] Nguyen, D H and Hiroshi, M. (2011). Structural behavior of double-lap joints of steel splice plates bolted/bonded to pultruded hybrid CFRP/GFRP laminates. Construction and building Materials,347-359.
[5] Saaman,M and Mirmian, A and Shahawy, M. (1998). Model of concrete concrete confined by fiber composites. Journal of Structural Engineering, 124-9, 1025-1031.
[6]Ayman, S Mossalam. (2011). Design Guide for FRP Copmosite Conecctions. Reston, Virginia: American Society of Civil Engineers, 601.
[7] Noah, M S and Mahesh, J P. (2012). Hybrid (Bonded/Bolted) Composite Single-Lap Joints and its LOAD Transfer Analysis. International Journal of Advanced Engineering Technology, E-ISSN 0976-3945, 213-216.
[8] Bickford, John H. (2008). Introduction to the design and behavior of bolted joints. 4th edition. Boca raton- London- New york: Taylor and Francis Group, 516.
[9]Khennane, A. (2013). Finite Element Analysis Using MATLAB and Abaqus. Boca Raton: Taylor and Francis Group, 458.
[10]Cueto, R V. (2007). Stress Wave Timing, A Simplistic And Cost Efective Method To Evaluate Deteriorated And Repaired Timber Bridge Piles. Lubboc, Texas: Master of Science, 100.
[11] Krishan, K Chawla. (2012). Composite Materials. 3th Edution. Birmingham: Department Of Materials Science and Engineering, 541.
[12] دفتر مقررات ملی ساختمان. .(1395)مبحث دهم طرح و اجرای ساختمانهای فولادی، تهران: نشر توسعه ایران، 304.