[1] Boroschek, R.L. Farias, G. Moroni, O. and Sarrazin, M. (2007). Effect of SMA Braces in a Steel Frame Building. Journal of Earthquake Engineering, 11 (3), 326-342.
[2] Dolce, M. and Cardone, D. (2001). Mechanical Behavior of Shape Memory Alloys for Seismic Applications 2. Austenite NiTi Bars Subjected to Tension. International Journal of Mechanical Sciences, 43 (11), 2657-2677.
[3] Wolons, D. Gandhi, F. and Malovrah, B. (1998). Experimental investigation of the pseudoelastic hysteresis damping characteristics of hape memory alloy wires. Journal of Intelligent Material Systems and Structures, 9 (2), 116-126.
[4] DesRoches, R. McCormick, C. and Delemont, M. (2004). Cyclic properties of superelastic shape memory alloy wires and bars. Journal of Structural Engineering, 130 (1), 38-46.
[5] Ren, W. Li H. and Song, G. (2007). A One-Dimensional Strain-Rate- Dependent Constitutive Model for Superelastic Shape Memory Alloys. Smart Materials and Structures, 16 (1), 191-197.
[6] Tobushi, H. Shimeno, Y. Hachisuka, T. and Tanaka, K. (1998). Influence of Strain Rate on Superelastic Properties of TiNi Shape Memory Alloy. Mechanics of Materials, 30 (2), 141-150.
[7] Dayananda, G.N. and Rao, M.S. (2008). Effect of Strain Rate on Properties of Superelastic NiTi Thin Wires. Materials Science and Engineering, 486 (1), 96-103.
[8] Soul, H. Isalgue, A. Yawny, A. Torra, V. and Lovey, F.C. (2010). Pseudoelastic Fatigue of NiTi Wires: Frequency and Size Effects on Damping Capacity. Smart Materials and Structures, 19 (8), 85006-85012.
[9] Ozbulut, O.E. and Hurlebaus, S. (2010). Neuro-Fuzzy Modeling of Temperature- and Strain-Rate-Dependent Behavior of NiTi Shape Memory Alloys for Seismic Applications. Journal of Intelligent Materials and Structures, 21 (8), 837-849.
[10] Ozbulut, O. E. Hurlebaus, S. and Desroches, R. (2011). Seismic Response Control Using Shape Memory Alloys: A Review. Structures Journal of Intelligent Material Systems, 22 (14), 1531-1549.
[11] Tanaka, K. (1986). A thermomechanical sketch of shape memory effect: onedimensional tensile behavior. Res. Mechanica, 18 (3), 251–263.
[12] Liang, C. and Rogers, C. A. (1990). One-dimensional thermo mechanical constitutive relations for shape memory material. Journal of Intelligent Material Systems and Structures, 1 (2), 207–234.
[13] Tobushi, H. Yamada, S. Hachisuka, T. Ikai, A. and Tanaka, K. (1996). Thermomechanical properties due to martensitic and R-phase transformations of TiNi shape memory alloy subjected to cyclic loadings. Journal of Smart Materials and Structures, 16 (3), 788–795.
[14] Graesser, E. J. and Cozzarelli, F. A. (1991). Shape-memory alloys as new materials for a seismic isolation. Journal of Engineering Mechanics, 117 (11), 2590–2608.
[15] Thomson, P. Balas, G. J. and Leo, P. H. (1995). The use of shape memory alloys for passive structural damping. Smart Materials and Structures, 4 (1), 36–42.
[16] Saadat, S. Noori, M. Davoodi, H. Hou, Z. Suziki, Y. and Masuda, A. (2001). Using NiTi SMA tendons for vibration control of coastal structures. Smart Materials and Structures, 10 (4), 695–704.
[17] Masuda, A. and Noori, M. (2002). Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys. International Journal of Non-Linear Mechanics, 37 (8), 1375–1386.
[18] Andrawes, B. and DesRoches, R. (2005). Unseating prevention for multiple frame bridges using superelastic devices. Smart Materials and Structures, 14 (3), 60–67.
[19] Fugazza, D. (2003). Shape-memory alloy devices in earthquake engineering: mechanical properties, constitutive modelling and numerical simulations. Master degree of earthquake engineering. European ROSE School.
[20] Auricchio, F. and Sacco, E. (1997). A one-dimensional model for superelastic shapememory alloys with different elastic properties between austenite and martensite. International Journal of Non-Linear Mechanics, 32 (6), 1101-1114.
[21] Ozbulut, O. E. (2010). Seismic protection of bridge structures using shape memory alloy-based isolation systems against near-field earthquakes. Doctor of Philosophy. Texas A&M University.
[22] Van, de Lindt, J.W. and Potts, A. (2008). Shake Table Testing of a Superelastic Shape Memory Alloy Response Modification Device in a Wood Shearwall. Journal of Structural Engineering, 134 (8), 1343-1352.
[23] Araki, Y. Endo, T. Omori, T. Sutou, Y. Koetaka, Y. Kainuma, R. and Ishida, K. (2011). Potential of superelastic Cu–Al–Mn alloy bars for seismic applications. Earthquake Engineering & Structural Dynamics, 40 (1), 107–115.
[24] Sutou, Y. Omori, T. Kainuma, R. and Ishida, K. (2003). Effect of grain size and texture on superelasticity of Cu–Al–Mn-based shape memory alloys. Journal of Physics, 112, 511–514
[25] Sutou, Y. Omori, T. Yamauchi, K. Ono, N. Kainuma, R. and Ishida, K. (2005). Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire. Acta Materialia, 53 (15) 4121–4133.
[26] Araki, Y. Maekawa, N. Omori, T. Sutou, Y. Koetaka, Y. Kainuma, R. and Ishida, K. (2012). Rate-dependent response of superelastic Cu-Al-Mn alloy rods to tensile cyclic loads. Smart Materials and Structures, 21 (3) 032002- 032009.
[27] Araki, Y. Shrestha, K.C. Maekawa, N. Koetaka, Y. Yoshida, N. Omori, T. Sutou, Y. Kainuma, R. Ishida, K. (2012). Cu-Al-Mn Super-elastic Alloy Bars as Dissipative Brace System in Structural Steel Frame. In: The 15th World Conference on Earthquake Engineering, Lisbon.
[28] Araki, Y. Maekawa, N. Shrestha, KC. Yamakawa, M. Koetaka, Y. Omori, T. Kainuma, R. (2014). Feasibility of tension braces using Cu–Al–Mn superelastic alloy bars. Structural Control and Health Monitoring, 21 (10), 1304–1315.
[29] Araki, Y. Maekawa, N. Shrestha, KC. Yamakawa, M. Koetaka, Y. Omori, T. Kainuma, R. (2015). Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces. Earthquake Engineering & Structural Dynamics, 45 (2), 297–314.
[30] Erochko, J A. (2013). Improvements to the design and use of post-tensioned self-centering energy-dissipative (SCED) braces. Doctor of Philosophy. University of Toronto.
[31] Moradi, S. Alam, S. Asgarian, B. (2014). Incremental dynamic analysis of steel frames equipped with NiTi shape memory alloy braces. The journal of Tall and Special Building, 23 (18), 1406–1425.
[32] Asgarian, B. Moradi, S. (2011). Seismic response of steel braced frames with shape memory alloy braces. Journal of Constructional Steel Research, 67 (1), 65-74.
[33] McCormick, J. DesRoches, R. Fugazza, D. and Auricchio, F. (2006). Seismic vibration control using superelastic shape memory alloys. Journal of Engineering Materials and Technology, 128 (3) 294-301.
[34] McCormick, J. DesRoches, R. Fugazza, D. and Auricchio, F. (2007). Seismic Assessment of Concentrically-Braced Steel Frames Using Shape Memory Alloy Braces. Journal of Structural Engineering, 133 (6), 863-870.