[1] Achilli, E., et al. (2016). Enhanced gold nanoparticle-tumor cell recognition by albumin multilayer coating. OpenNan.
[2] Adkins, L. (2022). Fiber-reinforced polymer (FRP) resin and corrosion barrier selection–the testing behind the recommendation. In: Proceedings of the AMPP annual conference+ expo. OnePetro.
[3] Ali, A. H., et al. (2019). Durability performance and long-term prediction models of sand-coated basalt FRP bars. Compos. Part B Eng., 157, 248–258.
[4] Ali, A. H., Mohamed, H. M., & Benmokrane, B. (2020). Bar size effect on long-term durability of sand-coated basalt-FRP composite bars. Compos. Part B Eng., 195, 108059.
[5] Al-Saadi, A. U., Aravinthan, T., & Lokuge, W. (2018). Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Compos. Struct., 204, 513–524.
[6] Aniskevich, A., & Glaskova-Kuzmina, T. (2019). Effect of moisture on elastic and viscoelastic properties of fiber reinforced plastics: retrospective and current trends. Creep and fatigue in polymer matrix composites. Elsevier, 83–120.
[7] Ashrafi, H., et al. (2017). The effect of mechanical and thermal properties of FRP bars on their tensile performance under elevated temperatures. Constr. Build. Mater., 157, 1001–1010.
[8] Awaja, F., et al. (2016). Cracks, microcracks, and fracture in polymer structures: formation, detection, autonomic repair. Prog. Mater. Sci., 83, 536–573.
[9] Bazli, M., et al. (2020). Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments. Compos. Part B Eng., 2020, 202, 108409.
[10] Bazli, M., Heitzmann, M., & Hernandez, B. V. (2021). Hybrid fibre reinforced polymer and seawater sea sand concrete structures: a systematic review on short-term and long-term structural performance. Constr. Build. Mater., 301, 124335.
[11] Blackburn, B. P., et al. (2015). Effects of hygrothermal conditioning on epoxy adhesives used in FRP composites. Constr. Build. Mater., 96, 679–689.
[12] Chang, B. P., Mohanty, A. K., & Misra, M. (2020). Studies on durability of sustainable biobased composites: a review. RSC Adv., 10(31), 17955–17999.
[13] Correia, J. R. (2015). Fibre-reinforced polymer (FRP) composites. Mater. Constr. Civ. Eng. Sci. Process Des., 501–556.
[14] Cousin, P., et al. (2019). Chemical resistance of carbon, basalt, and glass fibers used in FRP reinforcing bars. J. Compos. Mater., 53(26–27), 3651–3670.
[15] Duo, Y., et al. (2021). Environmental impact on the durability of FRP reinforcing bars. J. Build Eng., 43, 102909.
[16] Eftekhari, M., & Fatemi, A. (2015). Tensile, creep and fatigue behaviours of short fibre reinforced polymer composites at elevated temperatures: a literature survey. Fatigue Fract. Eng. Mater. Struct., 38(12), 1395–1418.
[17] Elgabbas, F., Ahmed, E. A., & Benmokrane, B. (2015). Physical and mechanical characteristics of new basalt-FRP bars for reinforcing concrete structures. Constr. Build. Mater., 95, 623–635.
[18] Fan, Y., et al. (2019). Diffusion of water in glass fiber reinforced polymer composites at different temperatures. J. Compos. Mater., 53(8), 1097–110.
[19] Fan, Y., et al. (2021). Comparative failure study of different bonded basalt fiber-reinforced polymer (BFRP)-AL joints in a humid and hot environment. Polymers, 13(16), 2593.
[20] Feng, G., et al. (2022). A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions. Cem. Concr. Compos., 104758.
[21] Ferdosian, F., et al. (2016). Curing kinetics and mechanical properties of bio-based epoxy composites comprising lignin-based epoxy resins. Eur. Polym. J., 82, 153–165.
[22] Foruzanmehr, M., et al. (2016). Degradation characteristics of new bio-resin based-fiber-reinforced polymers for external rehabilitation of structures. J. Compos. Mater., 50(9), 1227–1239.
[23] Frigione, M., & Lettieri, M. (2018). Durability issues and challenges for material advancements in FRP employed in the construction industry. Polymers, 10(3), 247.
[24] Frketic, J., Dickens, T., & Ramakrishnan, S. (2017). Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: an additive review of contemporary and modern techniques for advanced materials manufacturing. Addit. Manuf., 14, 69–86.
[25] Gagani, A. I., Mialon, E. P., & Echtermeyer, A. T. (2019). Immersed interlaminar fatigue of glass fiber epoxy composites using the I-beam method. Int. J. Fatigue, 119, 302–310.
[26] Gharde, S., & Kandasubramanian, B. (2019). Mechanothermal and chemical recycling methodologies for the Fibre Reinforced Plastic (FRP). Environ. Technol. Innov., 14, 100311.
[27] Glaskova-Kuzmina, T., et al. (2016). Effect of moisture on elastic and viscoelastic properties of epoxy and epoxy-based carbon fibre reinforced plastic filled with multiwall carbon nanotubes. Compos. Part A Appl. Sci. Manuf., 90, 522–527.
[28] Goda, E. S., et al. (2021). Smart flame retardant coating containing carboxymethyl chitosan nanoparticles decorated graphene for obtaining multifunctional textiles. Cellulose, 28, 5087–5105.
[29] Gooranorimi, O. (2016). FRP reinforcement for concrete: performance assessment and new construction: volume I: Sierrita De La Cruz Creek bridge. RE-CAST Tier-1 University Transportation Center.
[30] Gravina, R. J., et al. (2020). Environmental durability of FRP bar-to-concrete bond: critical review. J. Compos. Constr., 24(4), 03120001.
[31] Guermazi, N., et al. (2016). On the durability of FRP composites for aircraft structures in hygrothermal conditioning. Compos. Part B Eng., 85, 294–304.
[32] Gunaselvi, S., Sudarsan, J. S., & Nithyanantham, S. (2022). Electroless nickel (EN) coating of mild steel bar as an innovative material enhancement strategies to resist corrosion in coastal structures. Innov. Infrastruct. Solut., 7(3), 226.
[33] Guo, X., et al. (2022). Deterioration of mechanical properties of basalt/carbon hybrid FRP bars in SWSC under seawater corrosive environment. Constr. Build. Mater., 317, 125979.
[34] Gustke, K., et al. (2021). Enhancement of the adhesion of wire arc sprayed coatings on carbon fiber-reinforced plastic by surface laser structuring. Coatings, 11(4), 467.
[35] Hadigheh, S. A., Gravina, R. J., & Smith, S. T. (2017). Effect of acid attack on FRP-to-concrete bonded interfaces. Constr. Build. Mater., 152, 285–303.
[36] Hadigheh, S. A., & Kashi, S. (2018). Effectiveness of vacuum consolidation in bonding fibre reinforced polymer (FRP) composites onto concrete surfaces. Constr. Build. Mater., 187, 854–864.
[37] Han, W., Zhou, J., & Shi, Q. (2022). Research progress on enhancement mechanism and mechanical properties of FRP composites reinforced with graphene and carbon nanotubes. Alex. Eng. J.
[38] Heshmati, M., Haghani, R., & Al-Emrani, M. (2016). Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges. Compos. Part B Eng., 92, 447–462.
[39] Hu, J., et al. (2020). A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: the liquid-phase oxidation followed by grafting of silane coupling agent. Compos. Part B Eng., 191, 107966.
[40] Hunter-Alarcon, R. A., et al. (2018). Effect of the natural aging process on the shear strength of FRP composite single lap joints. Int. J. Adhes. Adhes., 86, 4–12.
[41] Iqbal, N., et al. (2016). Polyurea coatings for enhanced blast-mitigation: a review. RSC Adv., 6(111), 109706–109717.
[42] Jehanno, C., et al. (2022). Critical advances and future opportunities in upcycling commodity polymers. Nature, 603(7903), 803–814.
[43] Jia, D., et al. (2020). Durability of glass fibre-reinforced polymer (GFRP) bars embedded in concrete under various environments. I: Experiments and analysis. Compos. Struct., 234, 111687.
[44] Jia, Z., et al. (2018). An experimental investigation of the temperature effect on the mechanics of carbon fiber reinforced polymer composites. Compos. Sci. Technol., 154, 53–63.
[45] Kalidas, V. K., et al. (2021). Study of synthesis and analysis of bio-inspired polymers-review. Mater. Today Proc., 44, 3856–3860.
[46] Kim, Y. J. (2019). State of the practice of FRP composites in highway bridges. Eng. Struct., 179, 1–8.
[47] Kini, M. V., & Pai, D. (2022). The ageing effect on static and dynamic mechanical properties of fibre reinforced polymer composites under marine environment-a review. Mater. Today Proc., 52, 689–696.
[48] Kodur, V. K. (2016). Strategies for enhancing fire performance of NSM FRP-strengthened reinforced concrete beams. Multi-Hazard Approaches Civ. Infrastruct. Eng., 253–264.
[49] Lau, D., et al. (2016). Long term performance and fire safety aspect of FRP composites used in building structures. Constr. Build. Mater., 126, 573–585.
[50] Lee, S., et al. (2023). Aquavoltaic system for harvesting salt and electricity at the salt farm floor: field test year-round operation results and power generation improvement strategies. Sol. Energy, 258, 88–94.
[51] Lee, W., Lee, J. U., & Byun, J. H. (2015). Catecholamine polymers as surface modifiers for enhancing interfacial strength of fiber-reinforced composites. Compos. Sci. Technol., 110, 53–61.
[52] Li, C., et al. (2017). Effect of high temperature on the bond performance between basalt fibre reinforced polymer (BFRP) bars and concrete. Constr. Build. Mater., 141, 44–51.
[53] Li, F., et al. (2018). Sensing performance assessment of twisted CFRP with embedded fiber Bragg grating sensors subjected to monotonic and fatigue loading. Sens. Actuators A Phys., 271, 153–161.
[54] Li, J., et al. (2019). A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments. Compos. Struct., 229, 111372.
[55] Li, Y., et al. (2019). Modeling the effects of interfacial properties on the temperature dependent tensile strength of fiber reinforced polymer composites. Compos. Sci. Technol., 172, 74–80.
[56] Liang, X., Bao, W., & Gao, Y. (2018). Decay-like fracture mechanism of silicone rubber composite insulator. IEEE Trans. Dielectr. Electr. Insul., 25(1), 110–119.
[57] Liu, T., Liu, X., & Feng, P. (2020). A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects. Compos. Part B Eng., 191, 107958.
[58] Liu, X., Liu, T., & Feng, P. (2022). Long-term performance prediction framework based on XGBoost decision tree for pultruded FRP composites exposed to water, humidity and alkaline solution. Compos. Struct., 284, 115184.
[59] Liu, Z., et al. (2022). Research on mechanical properties and durability of flax/glass fiber bio-hybrid FRP composites laminates. Compos. Struct., 290, 115566.
[60] Majerski, K., Surowska, B., & Bienias, J. (2018). The comparison of effects of hygrothermal conditioning on mechanical properties of fibre metal laminates and fibre reinforced polymers. Compos. Part B Eng., 142, 108–116.
[61] Mayandi, K., et al. (2020). An overview of endurance and ageing performance under various environmental conditions of hybrid polymer composites. J. Mater. Res. Technol., 9(6), 15962–1588.
[62] Mikami, C., Wu, H.-C., & Elarbi, A. (2015). Effect of hot temperature on pull-off strength of FRP bonded concrete. Constr. Build. Mater., 91, 180–186.
[63] Mirabedini, A., et al. (2020). Evolving strategies for producing multiscale graphene-enhanced fiber-reinforced polymer composites for smart structural applications. Adv. Sci., 7(11), 1903501.
[64] Mi´skiewicz, M., Łukasz, Pyrzowski, & Sobczyk, B. (2020). Short and long term measurements in assessment of FRP composite footbridge behavior. Materials, 13(3), 525.
[65] Moges, F. D., et al. (2020). Mechanistic insights into diverse nano-based strategies for aquaculture enhancement: a holistic review. Aquaculture, 519, 734770.
[66] Morampudi, P., et al. (2021). Review on glass fiber reinforced polymer composites. Mater. Today Proc., 43, 314–319.
[67] Nan, J., et al. (2023). Seawater aging effect on fiber-reinforced polymer composites: mechanical properties, aging mechanism, and life prediction. Text. Res. J., 00405175231152666.
[68] O’Ceallaigh, C., et al. (2018). Mechano-sorptive creep in reinforced glulam. In: Proceedings of the WCTE 2018 world conference on timber engineering, Seoul, Rep. of Korea, August 20–23, 2018. National University of Ireland Galway; 2018.
[69] Ostrowski, K. A., et al. (2022). Consideration of critical parameters for improving the efficiency of concrete structures reinforced with FRP. Materials, 15(8), 2774.
[70] Pawlak, F., et al. (2019). Effect of different compatibilizers on injection-molded green fiber-reinforced polymers based on poly (lactic acid)-maleinized linseed oil system and sheep wool. Polymers, 11(9), 1514.
[71] Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Mater. Des., 139, 45–55.
[72] Ray, B. C., & Rathore, D. (2015). Environmental damage and degradation of FRP composites: a review report. Polym. Compos., 36(3), 410–423.
[73] Sadowski, Ł., et al. (2021). Enhanced adhesive performance of epoxy resin coating by a novel bonding agent. Constr. Build. Mater., 301, 124078.
[74] Salas, M., et al. (2018). Measuring material moisture in fiber reinforced polymers by integrated Sensors. IEEE Sens. J., 18(9), 3836–3843.
[75] Sandinge, A., et al. (2021). The necessity of accelerated ageing in fire performance assessments of composite materials. Saf. Sci., 141, 105358.
[76] Serbescu, A., Guadagnini, M., & Pilakoutas, K. (2015). Mechanical characterization of basalt FRP rebars and long-term strength predictive model. J. Compos. Constr., 19(2), 04014037.
[77] Sethi, S., & Ray, B. C. (2015). Environmental effects on fibre reinforced polymeric composites: evolving reasons and remarks on interfacial strength and stability. Adv. Colloid Interface Sci., 217, 43–67.
[78] Shahabaz, S. M., et al. (2021). Influence of temperature on mechanical properties and machining of fibre reinforced polymer composites: a review. Eng. Sci., 16, 26–46.
[79] Shojaei, A. K., & Wedgewood, A. R. (2017). An anisotropic cyclic plasticity, creep and fatigue predictive tool for unfilled polymers. Mech. Mater., 106, 20–34.
[80] Shrestha, J., Ueda, T., & Zhang, D. (2015). Durability of FRP concrete bonds and its constituent properties under the influence of moisture conditions. J. Mater. Civ. Eng., 27(2), A4014009.
[81] Siddika, A., et al. (2019). Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: a review. J. Build. Eng., 25, 100798.
[82] Sun, G., et al. (2021). On the effects of temperature on tensile behavior of carbon fiber reinforced epoxy laminates. Thin-Walled Struct., 164, 107769.
[83] Sutherland, S. L., et al. (2016). Quasi-static indentation response of pedestrian bridge multicellular pultruded GFRP deck panels. Constr. Build. Mater., 118, 307–318.
[84] Wang, F., et al. (2018). Improvement of the FRP sheet bonded to concrete substrate by silane coupling agent. J. Wuhan Univ. Technol. Mater. Sci. Ed., 33, 117–123.
[85] Wang, J. N., et al. (2016). Durability and prediction models of fiber-reinforced polymer composites under various environmental conditions: a critical review. J. Reinf. Plast. Compos., 35(3), 179–211.
[86] Wang, P., et al. (2023). Effects of relative humidity, alkaline concentration, and temperature on the degradation of plain/coated glass fibers: experimental investigation and empirical degradation model. Constr. Build. Mater., 391, 131757.
[87] Wang, P., et al. (2023). Hygrothermal aging effects on the diffusion-degradation process of GFRP composite: experimental study and numerical simulation. Constr. Build. Mater., 379, 131075.
[88] Wu, G., Wang, X., Wu, Z., Dong, Z., & Xie, Q. (2022). Deterioration of mechanical properties of basalt/carbon hybrid FRP bars in SWSC under seawater corrosive environment. Constr. Build. Mater., 317, 125979.
[89] Wu, G., Wang, X., Wu, Z., Dong, Z., & Zhang, G. (2015). Durability of basalt fibers and composites in corrosive environments. J. Compos. Mater., 49(7), 873–887.
[90] Xu, B., Blok, R., & Teuffel, P. (2023). An investigation of the effect of relative humidity on viscoelastic properties of flax fiber reinforced polymer by fractional-order viscoelastic model. Compos. Commun., 37, 101406.
[91] Xu, H., et al. (2021). Reappearance of typical characteristics of FRP core rods in the decay-like fracture insulator. IEEE Trans. Dielectr. Electr. Insul., 28(4), 1449–1456.
[92] Xu, J., Mkaddem, A., & El Mansori, M. (2016). Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review. Compos. Struct., 135, 316–338.
[93] Xu, Y., et al. (2019). Robust topology optimization for multiple fiber-reinforced plastic (FRP) composites under loading uncertainties. Struct. Multidiscip. Optim., 59, 695–711.
[94] Yan, L., Chouw, N., & Jayaraman, K. (2015). Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications. Mater. Des., 71, 17–25.
[95] Yan, L., Kasal, B., & Huang, L. (2016). A review of recent research on the use of cellulosic fibers, their fiber fabric reinforced cementitious, geo-polymer, and polymer composites in civil engineering. Compos. Part B Eng., 92, 94–132.
[96] Yang, J., Wang, Z., & Wang, J. (2022). Compressive performance of partially CFRP-confined square seawater-sea sand concrete columns with internal epoxy-coated reinforcement. J. Compos. Constr., 26(2), 04021073.
[97] Yarigarravesh, M., Toufigh, V., & Mofid, M. (2018). Environmental effects on the bond at the interface between FRP and wood. Eur. J. Wood Wood Prod., 76, 163–174.
[98] Yue, W., et al. (2023). Creep deformation and damage mechanism of compact graphite cast iron with different pearlite contents. J. Mater. Res. Technol., 23, 5031–5039.
[99] Zhang, B., et al. (2023). Mechanical properties and durability of FRP-reinforced coral aggregate concrete structures: a critical review. Mater. Today Commun., 105656.
[100] Zhang, H., et al. (2016). Tensile mechanical properties of basalt fiber reinforced polymer composite under varying strain rates and temperatures. Polym. Test., 51, 29–39.
[101] Zhang, S., Zhang, C., & Chen, X. (2015). Effect of statistical correlation between ply mechanical properties on reliability of fiber reinforced plastic composite structures. J. Compos. Mater., 49(23), 2935–2945.
[102] Zhang, Y., Lan, L., & Zhao, Y. (2023). Effect of precipitated phases on the mechanical properties and fracture mechanisms of Inconel 718 alloy. Mater. Sci. Eng. A, 144598.
[103] Zhao, J., et al. (2017). Deterioration of basic properties of the materials in FRP-strengthening RC structures under ultraviolet exposure. Polymers, 9(9), 402.
[104] Zhao, J., Mei, K., & Wu, J. (2020). Long-term mechanical properties of FRP tendon–anchor systems—a review. Constr. Build. Mater., 230, 117017.
[105] Zhao, X., et al. (2019). Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites. Polym. Compos., 40(6), 2273–2283.
[106] Zheng, B., & Dawood, M. (2017). Fatigue crack growth analysis of steel elements reinforced with shape memory alloy (SMA)/fiber reinforced polymer (FRP) composite patches. Compos. Struct., 164, 158–169.
[107] Zhou, A., et al. (2017). Investigation on interfacial defect criticality of FRP-bonded concrete beams. Compos. Part B Eng., 113, 80–90.
[108] Zhou, F., et al. (2019). Effect of temperature on material properties of carbon fiber reinforced polymer (CFRP) tendons: experiments and model assessment. Materials, 12(7), 1025.
[109] Zhou, L., et al. (2021). Mechanical behavior and durability of coral aggregate concrete and bonding performance with fiber-reinforced polymer (FRP) bars: a critical review. J. Clean Prod., 289, 125652.
[110] Zhu, Z.-Z., et al. (2016). Progress in durability study of FRP materials.
[111] Havaei, G., & Mohseni, S. (2025). The Environmental Resistance of Low-Carbon Geopolymer Concret, A Review Article. Journal of Structural and Construction Engineering, 12(01), 5-29.
[112] Havaei, G. (2023). Numerical evaluation of seismically retrofitted bridge concrete column under extreme loading. Structural Concrete, 24(4), 5349-5369.
[113] Havaei, G. R., & Keramati, A. (2011). Experimental and numerical evaluation of the strength and ductility of regular and cross spirally circular reinforced concrete columns for tall buildings under eccentric loading. The Structural Design of Tall and Special Buildings, 20(2), 247-256.
[114] Havaei, G., & Bayat, E. (2017). The structural response and manner of progressive collapse in RC buildings under the blast and Provide approaches to retrofitting columns against blast. Journal of Structural and Construction Engineering, 4(1), 81-100.
[115] Havaei, G. (2016). Sensitivity based analyses by artificial earthquake by measuring structural accelerations for damage assessment. Journal of Structural and Construction Engineering, 2(4), 104-116.
[116] Havaei, G., & Zare, A. (2017). Numerical analysis of effective parameters in response of the nonlinear passive viscous systems. Journal of Structural and Construction Engineering, 4(Special Issue 1), 35-47.
[117] Havaei, G., & Mobedi, E. (2015). Effect of interaction and rocking motion on the earthquake response of buildings. Journal of Structural and Construction Engineering, 1(1), 39-49.
[118] Havaei, G., & Izadparast, S. M. (2021). Effect of soil block thickness modeling on soil-structure interaction in dynamic responses of 15-storey high-rise buildings. Journal of Structural and Construction Engineering, 8(10), 301-316.
[119] Hayati, Y., Eslami, A., & Havaei, G. (2024). Asymmetric 3D stress-and flux-induced wave propagation in transversely isotropic thermoelastic solids by using of analytical methods. Waves in Random and Complex Media, 34(5), 4868-4885.
[120] Hayati, Y., Havaei, G., & Eslami, A. (2021). 3D asymmetric dynamic Green’s functions of a thermoelastic transversely isotropic solid by a method of potentials. Journal of Thermal Stresses, 44(11), 1366-1388.
