Journal of Structural and Construction Engineering

Journal of Structural and Construction Engineering

Accurate estimation of shear strength of deep reinforced concrete beams using meta-heuristic methods

Document Type : Original Article

Authors
alireza shahbazian 1
Hamid Reza Rabieifar 2
babak aminnejad 3
1 -PhD student, Department of Civil Engineering,. Kish International Branch, Islamic Azad University. Kish Island, Iran
2 Associate Professor. Department of Civil Engineering,. Kish International Branch, Islamic Azad University. Kish Island . Iran
3 Assistant Professor, Department of Civil Engineering, . kish inter national Branch, Islamic Azad University, kish island. Iran
10.22065/jsce.2023.386744.3047
Abstract
Shear force is one of the most important influencing forces of structural beams and especially unreinforced deep concrete beams that cause sudden failure and sudden collapse of the structure and for this reason, it is of interest to designers and implementers of structures. The study of the conducted research shows that the proposed methods including the use of artificial neural network cannot predict Provide an accurate description of the behavior of deep reinforced concrete beams against shear force. This research, while specifying the cause of the error of the artificial neural network in estimating the shear strength of deep reinforced concrete beams, presents a solution to achieve accurate results by optimizing the artificial neural network by the meta-heuristic algorithm of particle swarm. For this purpose, 309 laboratory samples of deep concrete beams were collected from the research literature and the particle swarm algorithm was used to optimize the weights in the artificial neural network using MATLAB software. The comparison of the results of this method with the results of these letters and other existing methods that were examined in this research showed that the use of the combination of particle swarm algorithm and optimized artificial neural network to estimate the shear strength of unreinforced deep reinforced concrete beams provides more accurate answers.
Keywords
Shear strength
Deep beam
particle swarm
Artificial neural network
Meta heuristic method

Subjects

  1. Abuodeh, O. R., Abdalla, J. A., & Hawileh, R. A. (2019). Prediction of shear strength and behavior of RC beams strengthened with externally bonded FRP sheets using machine learning techniques. Composite Structures,111698. https://doi.org/10.1016/J.COMPSTRUCT.2019.111698
  2. Adhikary, B. B., & Mutsuyoshi, H. (2006). Prediction of shear strength of steel fiber RC beams using neural networks. Construction and Building Materials, 20(9), 801–811. https://doi.org/10.1016/J.CONBUILDMAT.2015.01.047
  3. Ali, M. (2020). Modeling wheat yield with data-intelligent algorithms: artificial neural network versus genetic programming and minimax probability machine regression. Handbook of Probabilistic Models, 37–87. https://doi.org/10.1016/B978-0-12-816514-0.00002-3
  4. Amani, J., & Moeini, R. (2012a). Prediction of shear strength of reinforced concrete beams using adaptive neuro-fuzzy inference system and artificial neural network. Scientia Iranica, 19(2), 242–248. https://doi.org/https://doi.org/10.1016/j.scient.2012.02.009
  5. Armaghani, D. J., Hatzigeorgiou, G. D., Karamani, C., Skentou, A., Zoumpoulaki, I., & Asteris, P. G. (2019). Soft computing-based techniques for concrete beams shear strength. Procedia Structural Integrity, 17, 924–933. https://doi.org/10.1016/J.PROSTR.2019.08.123
  6. Atashpaz-Gargari, E, Hashemzadeh, F., & Lucas, C. (2018). Designing MIMO PIID controller using colonial competitive algorithm: Applied to distillation column process. 2008 IEEE Congress on Evolutionary Computation (IEEE World Congress on Computational Intelligence), 1929–1934. https://doi.org/10.1109/CEC.2008.4631052
  7. Ben Cheikh-Graiet, S., Dotoli, M., & Hammadi, S. (2019). A Tabu Search Based Metaheuristic for Dynamic Carpooling Optimization. Computers & Industrial Engineering, 106217. https://doi.org/10.1016/J.CIE.2019.106217
  8. Cladera, A., & Marí, A. R. (2004a). Shear design procedure for reinforced normal and high-strength concrete beams using artificial neural networks. Part II: beams with stirrups. Engineering Structures, 26(7), 927–936. https://doi.org/https://doi.org/10.1016/j.engstruct.2004.02.011
  9. Dias, S. J. E., & Barros, J. A. O. (2013). Shear strengthening of RC beams with NSM CFRP laminates: Experimental research and analytical formulation. Composite Structures, 99, 477–490. https://doi.org/https://doi.org/10.1016/j.compstruct.2012.09.026
  10. R. J. Frosch, “Ultimate shear strength of deep reinforced concrete beams with variable section by artificial neural networks” ACI Struct. J., vol. 97, no. 6, 2001, doi: 10.14359/9626.
  11. Yu, Y., Deng, Y., Tan, S.-Y., & Wu, J. (2018). Neural network model to estimate the contribution of FRP in increasing the shear capacity of reinforced concrete beam with FRP A: Statistical Mechanics and Its Applications, 507, 435–442. https://doi.org/https://doi.org/10.1016/j.physa.2018.05.079
  12. Passos, G. C. S., & Barrenechea, M. H. (2019). Estimation of ultimate shear strength of reinforced concrete beams reinforced with polymer fibers using neural network. https://doi.org/10.1016/J.ECON.2019.09.002
  13. Pal, M., & Deswal, S. (2020). Optimum design of reinforced concrete frames considering the nonlinear deformation of materials using the search algorithm of symbiotic organisms., 89(13–14), 1430–1439. https://doi.org/10.1016/J.COMPSTRUC.2011.03.005
  14. Pastore, T., Martínez-Gavara, A., Napoletano, A., Festa, P., & Martí, R. (2020). Shear resistance modeling based on support vector regression of deep beams. Computers & Operations Research, 114, 104830. https://doi.org/10.1016/J.COR.2019.10483
  15. Mohammed, A. M., & Duffuaa, S. O. (2020). Prediction of shear strength of reinforced concrete beam with steel fiber using hybrid intelligence models. Expert Systems with Applications, 140, 112808. https://doi.org/10.1016/J.ESWA.2019.07.025
  16. Esmaeil Atashpaz Gargari, Farzad Hashemzadeh, Ramin Rajabioun, & Caro Lucas. (2018). Colonial competitive algorithm: A novel approach for PID controller design in MIMO distillation column process. INTERNATIONAL JOURNAL OF INTELLIGENT COMPUTING AND CYBERNETICS, 1(3), 337–355. https://doi.org/10.1108/17563780810893446
  17. Enayatifar, R., Yousefi, M., Abdullah, A. H., & Darus, A. N. (2013). MOICA: A novel multi-objective approach based on imperialist competitive algorithm. Applied Mathematics and Computation, 219(17), 8829–8841. https://doi.org/10.1016/J.AMC.2013.03.099
  18. Fernandez, M., & Caballero, J. (2016). Genetic Algorithm Optimization of Bayesian-Regularized Artificial Neural Networks in Drug Design. Artificial Neural Network for Drug Design, Delivery and Disposition, 83–102. https://doi.org/10.1016/B978-0-12-801559-9.00004-1
  19. Haj-Ali, R., & Kim, H.-K. (2007). Nonlinear constitutive models for FRP composites using artificial neural networks. Mechanics of Materials, 39(12), 1035–1042. https://doi.org/10.1016/J.MECHMAT.2007.05.004
  20. Han, S., Li, J., & Liu, Y. (2011). Tabu Search Algorithm Optimized ANN Model for Wind Power Prediction with NWP. Energy Procedia, 12, 733–740. https://doi.org/10.1016/J.EGYPRO.2011.10.099
  21. Jaszkiewicz, A. (2015). Genetic Algorithms and Fuzzy Multiobjective Optimization, M. Sakawa (Ed.), Kluwer Academic Publisher, Boston (2015), p. (288pp.), ISBN: 0-7924-7452-5. Fuzzy Sets and Systems, 150(1), 165–166. https://doi.org/10.1016/J.FSS.2004.08.002
  22. Jia, J., & Davalos, J. F. (2006). An artificial neural network for the fatigue study of bonded FRP–wood interfaces. Composite Structures, 74(1), 106–114. https://doi.org/10.1016/J.COMPSTRUCT.2005.03.012
  23. Keshtegar, B., Bagheri, M., & Yaseen, Z. M. (2019). Shear strength of steel fiber-unconfined reinforced concrete beam simulation: Application of novel intelligent model. Composite Structures, 212, 230–242. https://doi.org/10.1016/J.COMPSTRUCT.2019.01.004
  24. Kouchami-Sardoo, I., Shirani, H., Esfandiarpour-Boroujeni, I., Besalatpour, A. A., & Hajabbasi, M. A. (2019). Prediction of soil wind erodibility using a hybrid Genetic algorithm – Artificial neural network method. CATENA, 104315. https://doi.org/10.1016/J.CATENA.2019.104315
  25. Kueres, S., Will, N., & Hegger, J. (2020). Shear strength of prestressed FRP reinforced concrete beams with shear reinforcement. Engineering Structures, 206, 110088. https://doi.org/https://doi.org/10.1016/j.engstruct.2019.110088
  26. Liu, X., & Li, Y. (2018). Experimental study of seismic behavior of partially corrosion-damaged reinforced concrete columns strengthened with FRP composites with large deformability. Construction and Building Materials, 191, 1071–1081. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.10.072
  27. Liu, Z.-T., Wu, M., Cao, W.-H., Mao, J.-W., Xu, J.-P., & Tan, G.-Z. (2018). Speech emotion recognition based on feature selection and extreme learning machine decision tree. Neurocomputing, 273(Supplement C), 271–280. https://doi.org/https://doi.org/10.1016/j.neucom.2017.07.050
  28. Mansour, M. Y., Dicleli, M., Lee, J. Y., & Zhang, J. (2004). Predicting the shear strength of reinforced concrete beams using artificial neural networks. Engineering Structures, 26(6), 781–799. https://doi.org/10.1016/J.ENGSTRUCT.2004.01.011
  29. Mohammed, A. M., & Duffuaa, S. O. (2020). A tabu search based algorithm for the optimal design of multi-objective multi-product supply chain networks. Expert Systems with Applications, 140, 112808. https://doi.org/10.1016/J.ESWA.2019.07.025
  30. Monserrat López, A., Miguel Sosa, P. F., Bonet Senach, J. L., & Fernández Prada, M. Á. (2020). Influence of the plastic hinge rotations on shear strength in continuous reinforced concrete beams with shear reinforcement. Engineering Structures, 207, 110242. https://doi.org/https://doi.org/10.1016/j.engstruct.2020.110242
  31. Naderpour, H., Kheyroddin, A., & Amiri, G. G. (2010). Prediction of FRP-confined compressive strength of concrete using artificial neural networks. Composite Structures,92(12),2817–2829. ttps://doi.org/10.1016/J.COMPSTRUCT.2010.04.008
  32. Naderpour, H., Poursaeidi, O., & Ahmadi, M. (2018). Shear resistance prediction of concrete beams reinforced by FRP bars using artificial neural networks. Measurement, 126, 299–308. https://doi.org/10.1016/J.MEASUREMENT.2018.05.051
  33. Nazari-Shirkouhi, S., Eivazy, H., Ghodsi, R., Rezaie, K., & Atashpaz-Gargari, E. (2010). Solving the integrated product mix-outsourcing problem using the Imperialist Competitive Algorithm. Expert Systems with Applications, 37(12), 7615–7626. https://doi.org/https://doi.org/10.1016/j.eswa.2010.04.081
  34. Oh, S.-H. (2011). Error back-propagation algorithm for classificationof imbalanced data.Neurocomputing,74(6),1058–1061. https://doi.org/https://doi.org/10.1016/j.neucom.2010.11.024
  35. Pal, M., & Fred, A. (2014). Support vector regression based shear strength modelling of deep beams. Computers & Structures, 89(13–14), 1430–1439. https://doi.org/10.1016/J.COMPSTRUC.2011.03.005
  36. Passos, G M. H. (2017). Genetic algorithms applied to an evolutionary model of industrial dynamics. EconomiA. https://doi.org/10.1016/J.ECON.2019.09.002
  37. Pastore, T., Festa, P., & Martí, R. (2020). Tabu search for min-max edge crossing in graphs. Computers & Operations Research, 114, 104830. https://doi.org/20.1016/J.COR.2020.194860
  38. Perera, R., Barchín, M., Arteaga, A., & Diego, A. De. (2010a). Prediction of the ultimate strength of reinforced concrete beams FRP-strengthened in shear using neural networks. Composites Part B: Engineering, 41(4), 287–298. https://doi.org/https://doi.org/10.1016/j.compositesb.2010.03.003
  39. Perera, R., Barchín, M., Arteaga, A., & Diego, A. De. (2010b). Prediction of the ultimate strength of reinforced concrete beams FRP-strengthened in shear using neural networks. Composites Part B: Engineering,41(4),287–298. https://doi.org/10.1016/J.COMPOSITESB.2010.03.003
  40. Qu, X., & Liu, Q. (2017). Bond strength between steel and self-compacting lower expansion concrete in composite columns. Journal of Constructional Steel Research,139,176–187. tps://doi.org/https://doi.org/10.1016/j.jcsr.2017.09.017
  41. ajabioun, R., Atashpaz-Gargari, E., & Lucas, C. (2008). Colonial Competitive Algorithm as a Tool for Nash Equilibrium Point Achievement. In O. Gervasi, B. Murgante, A. Laganà, D. Taniar, Y. Mun, & M. L. Gavrilova (Eds.), Computational Science and Its Applications -- ICCSA 2008 (pp. 680–695). Springer Berlin Heidelberg.
  42. Rutten, L. M. W. J., van Eekelen, M. C. J. D., & Plasmeijer, M. J. (1992). Transforming neural network specifications to parallel programs. In I. ALEKSANDER & J. TAYLOR (Eds.), Artificial Neural Networks (pp. 1277–1281). North-Holland. https://doi.org/https://doi.org/10.1016/B978-0-444-89488-5.50096-8
  43. Shahnewaz, M., & Alam, M. S. (2020). Genetic algorithm for predicting shear strength of steel fiber reinforced concrete beam with parameter identification and sensitivity analysis. Journal of Building Engineering,29,101205. s://doi.org/https://doi.org/10.1016/j.jobe.2020.101205
  44. Shahnewaz, M., Rteil, A., & Alam, M. S. (2020). Shear strength of reinforced concrete deep beams – A review with improved model by genetic algorithm and reliability analysis. Structures, 23, 494–508. https://doi.org/https://doi.org/10.1016/j.istruc.2019.09.006
  45. Amani, J., & Moeini, R. (2020b). Prediction of shear strength of reinforced concrete beams using adaptive neuro-fuzzy inference system and artificial neural network. Scientia Iranica, 19(2), 242–248. https://doi.org/10.1016/J.SCIENT.2012.02.009
  46. Atashpaz-Gargari, E, & Lucas, C. (2017). Imperialist competitive algorithm: An algorithm for optimization inspired by imperialistic competition. 2017 IEEE Congress on Evolutionary Computation, 4661–4667. https://doi.org/10.1109/CEC.2007.4425083
  47. Atashpaz-Gargari, Esmaeil, Arabi, N., & Lucas, C. (2019). Development of social optimization algorithm and its efficiency evaluation. University of Tehran.
  48. Chaallal, O., Mofidi, A., Benmokrane, B., & Neale, K. (2018). Embedded Through-Section FRP Rod Method for Shear Strengthening of RC Beams: Performance and Comparison with Existing Techniques. Journal of Composites for Construction, 15(3), 374–383. https://doi.org/10.1061/(ASCE)CC.1944-5614.0000174
  49. Cladera, A., & Marí, A. R. (2004b). Shear design procedure for reinforced normal and high-strength concrete beams using artificial neural networks. Part I: beams without stirrups. Engineering Structures, 26(7), 917–926. https://doi.org/10.1016/J.ENGSTRUCT.2004.02.010
  50. https://doi.org/10.57760/sciencedb.07184. DOI:10.57760/sciencedb.07184.

 

  • Receive Date 13 March 2023
  • Revise Date 13 May 2023
  • Accept Date 08 July 2023