[1] Green, N.B. (1981). Earthquake Resistant: Building Design and Construction. Van Nostrand Reinhold Company, New York.
[2] Verde, R.V. (1991). Explanation for the numerous upper floor collapses during the 1985 Mexico City earthquake. Earthquake engineering & structural dynamics, 20(3): p. 223-241.
[3] Chopra, A.K. and Cruz, E.F. (1986). Evaluation of building code formulas for earthquake forces. Journal of Structural Engineering, 112(8): p. 1881-1899.
[4] Cruz, E.F. and Chopra, A.K. (1990). Improved code-type earthquake analysis procedure for buildings. Journal of Structural Engineering, 116(3): p. 679-700.
[5] Nassar, A., Osteraas, J. and Krawinkler, H. (1992). Seismic design based on strength and ductility demands. In: 10th World Conference on Earthquake Engineering. Madrid.
[6] Miranda, E. (1997). Strength reduction factors in performance-based design. In: Proceedings of EERC-CUREe Symposium, Berkeley, CA..
[7] Moghaddam, H. and Mohammadi, R. (2001). Ductility reduction factor of MDOF shear-building structures. Journal of earthquake engineering, 5(03): p. 425-440.
[8] Humar, J. and Rahgozar, M. (2000). Application of uniform hazard spectra in seismic design of multistorey buildings. Canadian Journal of Civil Engineering, 27(3): p. 563-580.
[9] Humar, J. and Mahgoub, M.A. (2003). Determination of seismic design forces by equivalent static load method. Canadian Journal of Civil Engineering, 30(2): p. 287-307.
[10] Choi, W. S., Park, K. B., & Park, G. J. (2005). Calculation of equivalent static loads and its application. Nuclear engineering and design, 235(22), 2337-2348.
[11] Zhang, B., Chen, H., Li, M., Zhao, Z., Zhou, Y., & Fan, H. (2018). Equivalent static load method for hierarchical stiffened composite panel subjected to blast loading. Engineering Structures, 171, 569-582.
[12] Building and Housing Research Center. (2015). Iranian code of practice for seismic resistant design of buildings (Standard No. 2800.). 4th Edition, Tehran, Iran (in Persian).
[13] Nassar, A.A. and Krawinkler, H. (1991). Seismic Demands for SDOF and MDOF Systems. John A Blume Earthquake Engineering Center Technical Report 95: Stanford Digital Repository.
[14] Newmark, N.M. and Hall, W.J. (1982). Earthquake spectra and design. Earthquake Engineering Research Institute, Berkeley, California.
[15] Perform, C., 3D V5. (2011). Nonlinear Analysis and Performance Assessment for 3D Structures. Computer and Structures, Inc. Berkeley, CA.
[16] FEMA, P. (2000). Commentary for the seismic rehabilitation of buildings. FEMA-356, Federal Emergency Management Agency, Washington DC.
[17] Palmer, K. D., Roeder, C. W., Lehman, D. E., Okazaki, T., Shield, C. K., & Powell, J. (2012). Concentric X-braced frames with HSS bracing. International Journal of Steel Structures, 12(3), 443-459.
[18] Berman, J. W., & Bruneau, M. (2007). Experimental and analytical investigation of tubular links for eccentrically braced frames. Engineering Structures, 29(8), 1929-1938.