[1] Kolarkar P.N. (2010(. Srtuctural and thermal performance of cold-formed steel stud wall systems under fire condition. Ph.D. thesis. Queensland University of Technology, Brisbane, QLD 4000, Australia.
[2] Heva Y.B. and Mahendran M. (2013). Flexural-torsional buckling tests of cold-formed steel compression members at elevated temperatures. Steel and Composite Structures, 14 (3):205–227.
[3] Gunalan S., Heva Y.B. and Mahendran M. (2014). Flexural–torsional buckling behaviour and design of cold-formed steel compression members at elevated temperatures. Engineering Structures. 79:149–168.
[4] Gunalan S., Heva Y.B. and Mahendran M. (2014). Design of cold-formed steel columns at elevated temperatures subject to flexural-torsional buckling, Proceedings of the 7th European Conference on Steel and Composite Structures.
[5] Gunalan S., Heva Y.B. and Mahendran M. (2015). Local buckling studies of cold-formed steel compression members at elevated temperatures. Journal of Constructional Steel Research, 108: 31–45.
[6] Feng M., Wang Y.C. and Davies J.M. (2003). Structural behaviour of cold-formed thin walled short steel channel columns at elevated temperatures. Part 1: Experiments. Thin-Walled Structures, 41 (6): 543–570.
[8] Almeida S.J., Rodrigues J.P.C. and Neto J.M. (2012). Behaviour of Compressed Cold Formed Steel Elements at High Temperatures. 7 th International Conference on Structures in Fire, Zurich, Switzerland, June 6-8.
[9] Yang J., Wang W., Shi Y., Xu L. (2020). Experimental study on fire resistance of cold-formed steel built-up box columns. Thin–Walled Structures, 147.106564.
[10] Yang J., Shi Y., Wang W., Xu L., Al-azzani H. (2020). Experimental and numerical studies on axially restrained cold-formed steel built-up box columns at elevated temperatures. Journal of Constructional Steel Research. 171,106143.
[11] Kankanamge N.D. (2010). Structural behavior and design of cold-formed steel beams at elevated temperatures. Ph.D. thesis. Queensland University of Technology, Brisbane, QLD 4000, Australia.
[12] Craveiro, H.D.S. 2015. Fire resistance of cold-formed steel columns. Ph.D. thesis, University of Coimbra.
[13] BS 5950-8 (1990), Structural Use of Steelwork in Building - Part 8: Code of Practice for Fire Resistance Design. British Standards Institution (BSI), London, UK.
[14] Eurocode 3: Design of steel structures. Part 1-3: Design of cold-formed steel structures, ECCS – European Convention for Constructional Steelwork, Wiley-Blackwell, 676 p.
[15] SCI Publication P 129 (1993), Building Design using Cold-formed Steel Section: Fire Protection.
[16] Kankanamge N.D. and Mahendran M. (2011). Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49: 26–44.
[17] Ranawaka T. and Mahendran M. 2009. Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures. Fire Safety Journal, 44: 219–229.
[18] Lu Y., Zhou T., Li W. and Wu H. (2017). Experimental investigation and a novel direct strength method for cold formed built-up I-section columns. Thin-Walled Structures, 112:125–139.
[19] ABAQUS/Standard, Version 6.11.