انجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Risk Assessment and Prioritization Using a New Hybrid Decision-Making Approach Based on FMEA in Fuzzy Environment (Case Study: Arak Central Library Project)ارزیابی و اولویت بندی ریسک با استفاده از رویکرد ترکیبی نوین تصمیم گیری بر مبنای FMEA در محیط فازی (مطالعه موردی: پروژه کتابخانه مرکزی اراک)52914079510.22065/jsce.2021.221971.2092FAابولفضل الونددانشجوی دکتری مهندسی و مدیریت ساخت، گروه مهندسی عمران، دانشکده فنی و مهندسی، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایرانhttps://orcid.org/00سید محمد میرحسینیگروه مهندسی عمران، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران0000-0001-7747-1132محمد احسانی فراستادیار، گروه مهندسی صنایع، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران0000-0001-9817-0881احسان الله ضیغمیاستادیار، گروه مهندسیعمران، دانشکده فنی و مهندسی، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران0000-0001-9865-8019امیر محمدیاستادیار، گروه مهندسیعمران، دانشکده فنی و مهندسی، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایرانhttps://orcid.org/00Journal Article20200302Risk assessment and prioritization is one of the most important components of risk management in any organization. Failure Mode and Effects Analysis (FMEA) is one of the most commonly used methods for assessment and prioritization of the multiple risks. Despite the widespread applications of this method in various industries, FMEA is associated with some shortcomings that can lead to unrealistic results. In this study, a new hybrid decision- making approach is presented in three phases to cover some of the shortcomings of the FMEA technique. In the first phase, based on the subject literature and getting help from a group of experts, 23 risks related to the construction project were identified and classified into six groups including technical, dynamics of the project environment, multiplicity of project stakeholders, employer, project management, and contractor. In the second phase, the fuzzy Stepwise Weight Assessment Ratio Analysis (SWARA) is used to measure the weights of decision criteria. In the third phase, the outputs of the previous phases are used as a basis to prioritize the risks using the Weighted Aggregated Sum Product Assessment (WASPAS) methods under fuzzy environment. To illustrate the potential benefits and applications of the proposed hybrid approach in a case study was implemented. The results obtained from the new hybrid approach to show that the low performance of the human resources, communication and cooperation of a poor contractor with another group, lack of proper management by the contractor regarding financial matters, supplier support, and subcontractors, and low performance of the human resources as the most important risks were recognized in the construction project of the Central Library of Markazi Province. Also, after performing the validation test and sensitivity analysis, it was found that the proposed method can provide valuable and effective information in helping to manage the risk of construction projects.ارزیابی و اولویتبندی ریسک، از مهمترین مولفههای مدیریت ریسک در هر سازمان است. تکنیک تحلیل حالات و آثار شکستها (FMEA) یکی از متداولترین تکنیکها برای ارزیابی و اولویتبندی ریسکهای متعدد میباشد. علیرغم کاربردهای گسترده این روش در زمینههای مختلف با برخی از کاستیها همراه است که میتواند منجر به نتایج غیرواقعی شود. در مطالعه حاضر، به منظور برطرف نمودن کاستیهای تکنیک متداول FMEA، یک رویکرد ترکیبی نوین تصمیمگیری در سه مرحله پیشنهاد شده است. در مرحله اول، براساس پیشینه پژوهش و گروهی از متخصصان، 23 ریسک مربوط به پروژه عمرانی شناسایی و در 6 گروه شامل فنی، پویایی محیط پروژه، تعدد ذینفعان پروژه، کارفرما، مدیریت پروژه و پیمانکار دستهبندی شدند. سپس در مرحله دوم، از روش تحلیل نسبت ارزیابی وزندهی تدریجی (SWARA) تحت محیط فازی برای ارزیابی وزن معیارهای تصمیمگیری استفاده شد. در نهایت، خروجی فازهای قبلی به عنوان مبنایی برای اولویتبندی رویدادهای متعدد ریسک با استفاده از روش ارزیابی تولید وزنی تجمعی (WASPAS) تحت محیط فازی بکارگرفته شد. برای نشان دادن مزایای بالقوه و کاربرد رویکرد ترکیبی پیشنهادی در یک مطالعه موردی اجرا و پیادهسازی گردید. نتایج بدست آمده حاصل از رویکرد ترکیبی نوین تصمیمگیری بر مبنایFMEA نشان میدهد که عملکرد پائین نیروی انسانی، ارتباط و همکاری ضعیف پیمانکار با سایر گروهها، عدم مدیریت مناسب توسط پیمانکار در رابطه با مسائل مالی، حمایت تامینکنندگان و زیرمجموعههای آن و عدم هماهنگی منابع انسانی مرتبط به عنوان مهمترین ریسکها در پروژه کتابخانه مرکزی هستند. همچنین پس از انجام آزمون صحتسنجی و تحلیل حساسیت مشخص شد که روش پیشنهادی معتبر بوده و میتواند اطلاعات ارزشمند و موثری در کمک به مدیریت ریسک پروژههای عمرانی فراهم نماید.https://www.jsce.ir/article_140795_447d11624e655b56c70fb8255e4d2059.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Effect of subsurface cavity length on Rayleigh wave propagation to identify near and far boundary of the cavityارزیابی تاثیر طول حفره زیرسطحی بر انتشار امواج رایلی جهت شناسایی مرز دور و نزدیک حفره305014079310.22065/jsce.2021.299727.2530FAحسین رهنمااستادیار، دانشگاه صنعتی شیرازمحمود راسخدانشجوی کارشناسی ارشد ژئوتکنیک گروه عمران و محیطزیست، دانشگاه صنعتی شیراز، شیراز، ایرانسهراب میراثیاستادیار گروه مهندسی عمران، واحد شهرکرد، دانشگاه آزاد اسلامی،، شهرکرد، ایرانJournal Article20210815Subsurface identification in some cases requires seismic testing, especially when the goal is to identify anomalies at the site. Identifying and determining the dimensions of these anomalies is important because these cavities may be of considerable size and close to the ground. And cause irreversible risks by applying loading or any other changes in the soil environment. Seismic methods can also be used to identify aqueducts, mineral, oil and gas exploration. Due to various methods of identifying subsurface anomalies, in this paper, the multi-station surface wave analysis method is used, which is very fast and cost-effective. In this regard, by simulating in Abacus, finite element software environment, the effect of longitudinal dimensions of shallow subsurface cavities has been evaluated. The cavities are located at different lengths below the ground and the waves field in the time-offset and dispersion curves and graphs in the frequency-offset after the filter are examined. The obtained results in the time-distance showed that for a cavity with a length of 2, 4, 6 and 8 meters, the scattered waves are emitted from the far and near the face of the cavity with a longer time distance from each other in proportion to the increase in the length of the cavity. It can be concluded that the near and far boundary of cavity could be determined by using high resolution obtained data after filtering in time-distance domain, and more energy data in frequency-distance domain.شناسایی زیرسطحی در مواردی نیاز به آزمایشات لرزهای دارد به خصوص زمانی که هدف، شناسایی ناهنجاری در محل مورد نظر باشد، شناسایی و تعیین ابعاد این ناهنجاری ها از این بابت مورد اهمیت است که ممکن است این حفرات دارای اندازه قابل توجه و در نزدیکی سطح زمین باشند و با اعمال بارگذاری و یا هر گونه تغییرات دیگری در محیط خاک موجب ایجاد خطرات جبران ناپذیری گردد. از روش های لرزه ای میتوان جهت شناسایی قنات، اکتشافات معدنی، نفت و گاز نیز بهره گرفت. .با توجه به روش های گوناگون شناسایی ناهنجاری های زیرسطحی، در این مقاله از روش تحلیل چند ایستگاهی امواج سطحی استفاده شده است که بسیار سریع و مقرون به صرفه می باشد. در این راستا با شبیه سازی در محیط نرم افزار اجزا محدود اباکوس تاثیر ابعاد طولی حفره های کم عمق زیرسطحی مورد ارزیابی واقع شده است. حفره ها به طول های متفاوت در زیر سطح زمین قرار گرفته اند و میدان امواج در فضای زمان-فاصله و منحنی پراکندگی و نمودار ها در فضای فرکانس-فاصله بعد از فیلتر بررسی شده اند. نتایج به دست آمده در حوزه زمان-فاصله نشان دادند برای حفره به طول 2، 4، 6 و 8 متر امواج بازگشتی متناسب با افزایش طول حفره، از مرز دور و مرز نزدیک حفره با فاصله زمانی بیشتری از همدیگر منتشر می شوند و می توان مرز های طولی حفره را از طریق امواج بازگشتی با وضوح بیشتر بعد از فیلتر در حوزه زمان-فاصله و انرژی بیشتر در فضای فرکانس-فاصله شناسایی نمود.https://www.jsce.ir/article_140793_e42762c76b5aee1c49c8b90702569273.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Progressive collapse resistance of steel moment frames with different types of beam-to-column welded connections in various column removal scenariosمقاومت خرابی پیشرونده قابهای خمشی فولادی با انواع اتصالات جوشی تیر به ستون در سناریوهای مختلف حذف ستون517914033210.22065/jsce.2021.294557.2492FAصمد برمکیگروه عمران، واحد ارومیه، دانشگاه آزاد اسلامی ، ارومیه، ایرانمحمد رضا شیدایی1-گروه عمران، واحد ارومیه، دانشگاه آزاد اسلامی ، ارومیه، ایران. 2- استاد دانشکده فنی و مهندسی، دانشگاه ارومیه، ارومیه، ایران.0000-0002-9606-0205امید عزیزپور میاندواب1- گروه عمران، واحد ارومیه، دانشگاه آزاد اسلامی ، ارومیه، ایرانJournal Article20210711When the progressive collapse phenomenon occurs due to the column removal, the beam-to-column connections must have enough resistance and ductility to be able to withstand the additional imposed loads. Often the onset of failure in the structures exposed to abnormal loads arises from the beam-to-column connections. In the present study, using nonlinear quasi-static analysis method, the steel moment frame with different types of beam-to-column welded connections including welded unreinforced flange-welded web moment (WUF-W), reduced beam section (RBS), welded flange plate (WFP) and welded flange-weld web connection with internal diaphragms (I-W), under three different corner, interior and side column removal scenarios and also the column removal scenario with two beams in line are evaluated. The force-displacement diagram and failure modes for sample connections at different positions of the plan are extracted. In addition to assessing the resistance of each connection in the four column removal scenarios, the comparison between the bearing capacities of each connection with other connections has been carried out for different column removal scenarios. The results revealed that the WFP connection (with maximum vertical force of 473.71 kN and maximum load factor of 2.49) in all connecting positions had better resistance to progressive collapse, and bearing capacity of this connection is high. After WFP connection, in the case of removal of the internal column with four perpendicular beams, the W-I, RBS, and WUF-W connections (with maximum vertical force of 369.40, 318.025 and 305.4 kN, respectively and with maximum load factor of 2.28, 1.90, 1.82, respectively) had a higher resistance, respectively. Examination of the results of load-displacement diagrams showed that WUF-W and W-I connections in the side column removal senario as well as RBS and WFP connections in the middle column removal senario had greater resistance to progressive collapse and high load-bearing capacity.به هنگام بروز پدیدهی خرابی پیشرونده ناشی از حذف ستون، اتصالات تیر به ستون سازه باید دارای مقاومت و شکلپذیری کافی باشند؛ تا بتوانند بارهای اضافی وارده را تحمل نمایند. غالبا شروع گسترش خرابی در سازههایی که در معرض بارهای غیرعادی قرار داشتهاند از محل اتصال تیر به ستون بوده است. در پژوهش حاضر با استفاده از روش آنالیز شبه استاتیکی غیرخطی، قاب خمشی فولادی با انواع مختلف اتصالات جوشی تیر به ستون شامل اتصال مستقیم تقویتنشده جوشی (WUF-W)، اتصال تیر با مقطع کاهشیافته (RBS)، اتصال جوشی به کمک ورقهای روسری و زیرسری (WFP) و اتصال مستقیم جوشی (I-W)، تحت اثر سه سناریوی مختلف حذف ستون گوشه، داخلی،کناری و همچنین سناریوی حذف ستون با دو تیر همراستا مورد ارزیابی قرار گرفته است. نمودار نیرو-تغییرمکان و حالتهای خرابی برای اتصالات نمونه در نقاط مختلف پلان استخراج شده است. علاوه بر ارزیابی مقاومت هر اتصال در چهار حالت سناریوی حذف ستون، مقایسه بین ظرفیت باربری هر اتصال با اتصالات دیگر به ازای سناریوهای مختلف حذف ستون صورت گرفته است. نتایج تحلیل نشان داده است که اتصالWFP (با حداکثر نیروی عمودی 473/71 کیلو نیوتن و ضریب بار 2/49)، در تمامی موقعیتهای اتصالی تیر به ستون مقاومت بهتری در برابر خرابی پیشرونده دارد؛ و ظرفیت باربری این اتصال بالاست. بعد از اتصالWFP ، به ترتیب اتصالاتW-I ، RBS ،WUF-W (با حداکثر نیروی عمودی به ترتیب 369/40، 318/025 و 305/4 کیلو نیوتن و حداکثر ضریب بار به ترتیب 2/28، 1/90، 1/82) در حالت حذف ستون داخلی و با چهار تیر متعامد از مقاومت بالاتری برخوردار بودند. بررسی نتایج حاصل از نمودارهای نیرو-تغییرمکان نشان میدهد که اتصالات WUF-W وW-I در سناریوی حذف ستون کناری و اتصالات RBS و WFPدر سناریوی حذف ستون میانی، مقاومت بیشتری در خرابی پیشرونده و ظرفیت باربری بالایی دارند.https://www.jsce.ir/article_140332_85e01b5187fb71632099f833f61983b4.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Investigation of clay of rey town improvement with glass fibers and its effect on reducing the settling of strip foundationsبررسی بهسازی خاک رس شهرری با الیاف شیشه و تاثیر آن در کاهش نشستپذیری پیهای نواری8110714079610.22065/jsce.2021.300156.2535FAمسعود ذبیحی سامانیدانشکده مهندسی عمران، واحد پرند، دانشگاه آزاد اسلامی، پرند، ایران0000-0002-1330-165Xپروین دولتیدانشکده مهندسی عمران، واحد پرند، دانشگاه آزاد اسلامی، پرند، ایرانزهرا باباییدانشکده مهندسی عمران، واحد تهران شرق، دانشگاه آزاد اسلامی، تهران، ایرانسید مصطفی دریاباریدانشکده مهندسی عمران، واحد پرند، دانشگاه آزاد اسلامی، پرند، ایرانJournal Article20210816The addition of glass fibers has been used to stabilize the unsuitable clay of Rey city to reduce the subsidence in the strip foundations due to the improvement of resistance parameters. The combination of glass fibers with clay and the effect of using this additive on the stabilization of clay fine-grained clay (CL) were investigated in the laboratory. Soil samples in the natural state as well as in the combined state with different percentages of glass fibers equal to 0.2, 0.4 and 0.6, 0.8 and 1% of the dry weight of the soil were used for laboratory tests including standard compaction test, California load ratio test and direct cutting. Were located. The results show a decrease in unit weight of maximum soil volume and an increase in optimum moisture content, as well as a California load-bearing ratio by adding this material to the clay. The amount of adhesion and the internal friction angle resulting from the direct shear test increase with increasing percentage of glass fibers. After laboratory studies, the effects of using modified soil with improvement depths of one meter, two meters, four meters for strip foundations with widths of 0.75, 1.50 and 2.25 meters with the help of Plaxis2D software show that by increasing the percentage of mixing glass fibers In fine-grained clay soils, the amount of foundation deposition is reduced, while the reduction of foundation deposition on soil mixed with 0.8% glass fibers is more than soil mixed with 1% glass fibers. The reduction rate of the strip foundation with a width of 0.75 m with a mixing percentage of 0.8 glass fibers and a depth of improvement of 4 m is 1.57 cm. ،he reduction rate of the desired foundation with widths of 1.5 and 2.25 meters is equal to 2.29 and 2.72 cm, respectivelyدر این پژوهش، از افزودنی الیاف شیشه جهت تثبیت خاک رس نامناسب شهر ری به منظور کاهش نشست در پیهای نواری در اثر بهبود پارامترهای مقاومتی استفاده شده است. الیاف شیشه با خاک رس ترکیب و تأثیر استفاده از این ماده افزودنی در تثبیت خاک ریزدانه رسی (CL) در آزمایشگاه مورد بررسی قرار گرفت. نمونههای خاک در حالت طبیعی و نیز در حالت ترکیب با درصدهای مختلف الیاف شیشه معادل 0.2، 0.4 و 0.6 و 0.8 و 1 درصد وزن خشک خاک برای آزمونهای آزمایشگاهی شامل آزمایش تراکم استاندارد، آزمایش آزمایش نسبت باربری کالیفرنیا و همچنین و برش مستقیم، مورد استفاده قرار گرفتند. نتایج بدست آمده کاهش وزن واحد حجم بیشینه خاک و افزایش رطوبت بهینه و همچنین نسبت باربری کالیفرنیا با افزودن این ماده به خاک رس را نشان میدهد. میزان چسبندگی و زاویه اصطکاک داخلی که حاصل از آزمایش برش مستقیم میباشد با افزایش درصد الیاف شیشه افزایش مییابند. پس از بررسیهای آزمایشگاهی اثرات استفاده از خاک اصلاح شده با اعماق بهسازی با یک متر، دو متر، چهار متر برای پی نواری به عرض های 0.75، 1.50 و 2.25 متر به کمک نرمافزار Plaxis2D نشاندهنده این امر است که با افزایش میزان درصد اختلاط الیاف شیشه به خاک ریزدانه رسی میزان نشست پی نواری مورد نظر کاهش یافته است این در حالی است که کاهش نشست پی نواری بر روی خاک مخلوط شده با 0.8 درصد الیاف شیشه بیشتر از خاک مخلوط شده با 1 درصد الیاف شیشه میباشد. میزان کاهش نشست پی نواری با عرض 0.75 متر با درصد اختلاط 0.8 الیاف شیشه و عمق بهسازی 4 متر 1.57 سانتیمتر می-باشد. همچنین میزان کاهش نشست پی مورد نظر با عرضهای 1.5 و 2.25 متر به ترتیب برابر با 2.29 و 2.72 سانتیمتر استhttps://www.jsce.ir/article_140796_d53ed72e9c8f04ed3a7565528c1b16f1.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Investigation of the Effect of Fire Loading on the Behavior of Connections with Beam-to-Column Bolted End Plate and
T-Connectionبررسی تاثیر آتش بر رفتار اتصالات پیچی تیر به ستون با صفحه انتهایی و سپری اتصال10812914146810.22065/jsce.2021.303562.2563FAوحید صابریاستادیار، گروه مهندسی عمران، دانشگاه غیرانتفاعی ایوانکی، سمنان، ایرانحمید صابریاستادیار دانشکده عمران دانشگاه ایوانکی، سمنان، ایرانسید پوریا پناه خواهکارشناسی ارشد، گروه مهندسی عمران، دانشگاه غیرانتفاعی ایوانکی، سمنان، ایرانعباسعلی صادقیگروه عمران، دانشکده مهندسی، واحد مشهد، دانشگاه آزاد اسلامی، مشهد، ایران0000-0002-3016-9080احسان نوروزی نژاد فرسنگیگروه مهندسی زلزله و ژئوتکنیک، دانشکده مهندسی عمران و نقشه برداری، دانشگاه تحصیلات تکمیلی صنعتی و فناوری پیشرفته، کرمان، کرمان، ایران0000-0002-2790-526XJournal Article20210908In this study, comparison of the performance of beam-to-column bolted end plate connections and T-connection under fire is considered. To achieve this objective, samples are selected in three types of bolt number, the thickness of end-plate, and T-connection. Then, they are investigated and nonlinearly analyzed in ABAQUS finite element software and the results such as displacement-time curves, counters of stress and displacement are studied. According to the nonlinear finite element analyses results obtained in the first and second types, the beam-to-column connections have been investigated by changing the number of bolts and increasing the thickness of the end plate. The results indicated that the highest and lowest values of displacement-time curves are related to the samples have a 25 mm thickness end-plate with 4 bolts and a 10 mm thickness end-plate with 4 bolts, which affect the thickness of the end-plate with 36% and 17% fire resistance to rupture, respectively. It can also be seen that among the samples, connections with weak end-plates and fewer bolts in the final moment of loading at the end of fire analysis due to the high stress of plastic hinges can be seen. In the third type, the T-connection is examined with increasing thickness. The results showed that the maximum and minimum values of displacement-time curves are related to samples with a thickness of 17.5 mm and 9 mm with 25% and 11% fire resistance up to rupture, respectively. By comparison of the results of beam-to-column connection by changing the number of bolts and increasing the thickness of the end-plate and T-connection, the best sample has 25 mm thickness end plate with 8 bolts.در این تحقیق به مقایسه عملکرد اتصالات پیچی تیر به ستون با صفحه انتهایی و سپری اتصال تحت اثر بار آتش پرداخته شده است. بنابراین برای نیل به این هدف، نمونهها در سه حالت تعداد پیچ، ضخامت صفحه انتهایی و سپری اتصال در نرمافزار اجزا محدود ABAQUS مورد بررسی و تحلیل غیر خطی قرار گرفتهاند و منحنیهای جابجایی-زمان، کانتورهای تنش و تغییرمکان مطالعه شدهاند. با توجه به نتایج تحلیلهای اجزا محدود غیر خطی، در حالتهای اول و دوم به بررسی اتصالات تیر به ستون پیچی با تغییر تعداد پیچ و افزایش ضخامت صفحه انتهایی پرداخته شده که نشان میدهد بیشترین و کمترین مقدار منحنیهای جابجایی-زمان مربوط به نمونه-های دارای صفحه انتهایی با ضخامت 25 میلیمتر و تعداد 4 پیچ و صفحه انتهایی با ضخامت 10 میلیمتر و تعداد 4 پیچ میباشد، که با در نظر گرفتن تأثیر ضخامت صفحه انتهایی تحت آتش به ترتیب معادل 36% و 17% تا ایجاد گسیختگی مقاومت دارند. همچنین میتوان مشاهده کرد که از میان نمونههای موردنظر، اتصالات با صفحه انتهایی ضعیف و تعداد پیچ کمتر در لحظهی نهایی باربری در پایان تحلیل آتش به علت بالا بودن تنش، ایجاد مفاصل پلاستیک مشاهده میشود. در حالت سوم به بررسی سپری اتصال با افزایش ضخامت پرداخته شده که نتایج نشان دهنده این است که بیشترین و کمترین مقدار جابجایی-زمان مربوط به نمونههای سپری اتصال با ضخامت 5/17 میلیمتر و 9 میلیمتر میباشد که تحت آتش به ترتیب معادل 25% و 11% تا ایجاد گسیختگی مقاومت میکنند. با مقایسه نتایج اتصالات تیر به ستون پیچی با تغییر تعداد پیچ و افزایش ضخامت صفحه انتهایی و اتصالات با سپری بهترین نمونه، نمونهی دارای صفحه انتهایی به ضخامت 25 میلیمتر با تعداد 8 پیچ میباشد.https://www.jsce.ir/article_141468_3fb99078de5fcce6f63c19cac7b84303.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Technical and economical evaluation of the use of Mazandaran reed in non-structural concretesارزیابی فنی و اقتصادی استفاده از نی مازندران در بتن های غیر سازهای13014714079410.22065/jsce.2021.269569.2344FAمحسن رسولی فرمیدانشگاه آزاد اسلامی.ساری.ایرانسید میلاد جمالیمدیریت ساخت، عمران، صنعتی نوشیروانی، بابل، ایران/0000-0003-4236-8471محمدجواد طاهری امیریاستادیار موسسه آموزش عالی پردیسان، فریدونکنار، ایرانJournal Article20210120With increasing population, there is an increasing use of natural resources to produce materials suitable for construction such as bricks, cement and strong rods. This has exponentially increased their prices and also polluted the environment by producing large amounts of greenhouse gases. Therefore, there is a need to provide cheap and durable infrastructure. In this research, the purpose of evaluating the use of Mazandaran common reed, which is found abundantly in agricultural land and landfills, was in the construction industry. To this end, several mixing plans were designed to replace the sand in ordinary concrete with coarse aggregate from the reed and the resistance of the designs was evaluated at the age of 7, 28 and 90 days. In the following, two wall panels with rows of Mazandaran rods were placed in two cases without steel mesh and steel mesh. To find out the two panels, Schmidt's hammer test was first performed for both panels at 28 and 90 days. Then, with a test based on a study paper, its displacement load diagram was evaluated in a three-point bending condition. The results showed that the use of reed aggregates in concrete has obtained an acceptable resistance to the construction of non-structural prefabricated parts. Also, the use of straw instead of rebar in the wall panels has a similar behavior to the panel with fittings and has shown a good performance.با افزایش میزان جمعیت، استفاده روزافزون منابع طبیعی برای تولید مواد مناسب برای ساخت و ساز مانند آجر، سیمان و میلههای مستحکم وجود دارد. این امر به طور تصاعدی قیمت انان را افزایش داده و همچنین آلوده کردن محیط با تولید مقدار زیادی از گازهای گلخانهای را به همراه داشته است. بنابراین نیاز به ارائه زیرساخت ارزان و بادوام وجود دارد. در این تحقیق هدف ارزیابی استفاده از نی های مازندران که به وفور در زمین های کشاورزی و شالیزارها یافت می شود، در صنعت ساختمان بود که بدون استفاده درست و موثر از بین برده می شود. بدین منظور ابتدا چند طرح اختلاط برای جایگزینی شن در بتن های معمولی با سنگدانه های درشت حاصل از نی ساخته شد و میزان مقاومت فشاری طرح ها در سنین 7، 28و 90 روز ارزیابی شد. با جایگزینی کامل شن با نی مازندران نزدیک به 60 درصد افت مقاومت فشاری رخ داده است. هرچند این افت قابل ملاحظه است اما منجر به تشکیل یک بتن با مقاومت 7 روزه نزدیک به 10 مگاپاسکال شده است. در ادامه با ساخت دو پنل دیواری با ردیف های نی مازندران در دو حالت بدون مش فولادی و با مش فولادی در دستور کار قرار گرفت. برای ارزیابی مقاومت فشاری این دو پنل آزمایش چکش اشمیت برای هر دو پنل در سن 28 و 90 روز انجام شد. نتایج بدست آمده استفاده از سنگدانه های نی در بتن ها مقاومت قابل قبولی برای ساخت قطعات پیش ساخته غیر سازه ای نشان داده است. همچنین استفاده از نی به جای میلگرد ها در پنل های دیواری رفتار مشابهی با پنل دارای میلگرد داشته و عملکرد مناسبی از خود نشان داده است و همچنین پنل های دیواری ساخته شده با نی نسبت به دیوار چینی عادی با بلوک حدود 15درصد هزینه کمتری دارد.https://www.jsce.ir/article_140794_ad42cccb80d769ea219cc19fda0ebaff.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Evaluation of surface strength of self-compacting concrete under shrinkage and magnesium sulfate using "twist-off" methodبررسی مقاومت سطحی بتن خود متراکم تحت تاثیر جمع شدگی و سولفات منیزیم با به کارگیری آزمون "پیچش"14816114033110.22065/jsce.2021.281163.2422FAمحمود نادریاستاد، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایرانمحمد رضا نصیریکارشناس ارشد، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایرانعلی صابری ورزنهدکتری سازه، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران0000-0003-0921-6484Journal Article20210416Concerning the importance of shrinkage in the concrete industry, much research is being performed on this subject. Since the self-compacting concrete has high consistency, many researchers believe that the shrinkage of self-compacting concrete should be more attended than the shrinkage of plain concrete. Sulfates are among the common reasons for concrete destruction in most areas of Iran especially in the southern areas, where the concrete is subjected to seawater (which includes sulfate compounds). Since the amount of drying is higher in the surface of a concrete piece than its depth and the durability of the concrete structure highly depends on the strength and permeability of its surface layer, this paper applied a “Twist-off” test (which shows proper sensitivity against the surface change of concrete) to investigate the effect of shrinkage and magnesium sulfate on the surface strength of self-compacting concretes. Then, the change in the length of samples was presented together with their weight drop. In the end, by using the “Twist-off” test, the effect of magnesium sulfate and the length change of samples on the surface strength was evaluated. The results represent that the plain concrete, compared to the self-compacting ones, shows more reduction in the surface strength due to the effect of drying shrinkage. The reduction in strength of plain concrete is 18.4% by shrinkage that is 1.34 times of the self-compacting concrete with 45% fly ash, 1.35 times of the self-compacting concrete with 35% fly ash, and 1.37 times of the self-compacting concrete with 25% fly ash. For the self-compacting samples curing in magnesium sulfate solution, the 3-day and 7-day surface strengths were reduced by the increase of fly ash percentage, while the 28-day surface strength was increased.با توجه به اهمیت جمع شدگی در صنعت بتن، تحقیقات زیادی در ارتباط با این موضوع انجام شده است. از آنجا که بتن خود متراکم از روانی بسیاری برخوردار است، بسیاری بر این عقیده هستند که جمع شدگی بتن خود متراکم باید بیش از جمع شدگی بتن معمولی مورد توجه قرار گیرد. همچنین سولفات ها از عوامل شایع مخرب بتن در اکثر مناطق ایران به خصوص در مناطق جنوبی کشور که بتن در معرض آب دریا (حاوی ترکیبات سولفاتی) قرار دارد، می باشند. از آنجا که مقدار خشک شدگی در سطح یک قطعه بتنی با شدت بیشتری نسبت به اعماق آن اتفاق می افتد و دوام سازه بتنی، بستگی شدیدی به مقاومت و نفوذ پذیری لایه سطحی آن دارد، لذا در این مقاله از آزمون "پیچش" که در برابر تغییرات سطحی بتن، حساسیت خوبی از خود نشان می دهد، جهت بررسی تاثیر جمع شدگی و سولفات منیزیم بر مقاومت سطحی بتن های خود متراکم استفاده شده است. سپس تغییر طول نمونه ها به همراه افت وزنی آن ها ارائه گردید. در انتها نیز با به کارگیری آزمون "پیچش" تاثیر سولفات منیزیم و تغییر طول نمونه ها بر مقاومت سطحی مورد ارزیابی قرار گرفت. نتایج حاصله بیانگر این می باشد که در اثر جمعشدگی ناشی از خشکشدن، بتن معمولی در مقایسه با نمونههای خودمتراکم، کاهش بیشتری در مقاومت سطحی از خود نشان میدهد. کاهش مقاومت بتن معمولی در اثر جمعشدگی در حدود 4/18 درصد شده است که این کاهش در مقایسه با نمونه بتن خودمتراکم با 45 درصد خاکستر بادی 34/1 برابر، در مقایسه با نمونه بتن خودمتراکم با 35 درصد خاکستر بادی 35/1 برابر و در مقایسه با نمونه بتن خودمتراکم با 25 درصد خاکستر بادی 37/1 برابر میباشد.https://www.jsce.ir/article_140331_393257f670271c0f6a284f39f21c7a3b.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Evaluation of Displacement Amplification Factor of Steel Special Moment Frames Using Incremental Dynamic Analysisبررسی اثر ضریب بزرگنمایی تغییرمکان در قابهای خمشی فولادی ویژه با استفاده از تحلیل دینامیکی افزایشی16218114098410.22065/jsce.2021.298194.2521FAسیده مریم حسینی فرددانشجوی دکترای مهندسی سازه، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایرانفرزانه حامدیاستادیار ، دانشگاه، بین المللی امام خمینی (ره)، قزوین، ایرانJournal Article20210807In recent decades several destructive earthquakes resulted in extensive structural and non-structural damage in structures, that which was produced by lateral displacements. So, it reveals the necessity for theof accurate estimation of the lateral displacement of the structures in the design procedure. According to the present seismic design provisions, displacement amplification factor, (Cd), is being applied to acquire elastic lateral displacements in order to assess inelastic displacements, due to the ground motions. Besides, in many codes, these factors are empirical in nature and is based on structural performance, which has been observed in the past earthquakes; AlsoOn the other hand, the effect of height and number of stories are is neglected. In this paper, the effect of Cd on seismic performance of steel special moment frames is evaluated. Six types of buildings are designed with different values of Cd (i.e., 4, 5, 5.5, 6, 7, and 8). For each type of building,s 5 heights (i.e., 5-, 10-, 15-, 20- and 25-stories) are considered. The numerical finite element models are developed in Opensees. Incremental dynamic and nonlinear static analyses are performed to quantify structures’ seismic performance utilizing fragility curves and FEMA P695 methodology. The results indicate that the values of Cd provided in the codes for steel special moment frames does not induceare not completely effective on seismic performance, especially in short-rise buildings. Also, the probability of collapse of high-rise buildings are is less likely with respect to the medium-rise buildings; Therefore, in high-rise buildings, increasing the amount of Cd is not necessarily recommended, as because it increases the cross sections in of the frame members and makes the design uneconomical.تغییرمکانهای جانبی سازه با اعمال ضریب بزرگنمایی تغییرمکان ( ) در تغییرمکانهای حالت خطی در آئیننامههای طراحی متداول ارائه شده است. در بسیاری از آئیننامهها این ضرایب مطابق با رفتار واقعی سازه نیستند بلکه تجربی و بر اساس مشاهدات زلزلههای گذشته است. در این مقاله به بررسی تأثیر ضریب بزرگنمایی تغییرمکان در عملکرد لرزهای قابهای خمشی فولادی ویژه با تعداد طبقات مختلف پرداخته شده است. بدین منظور، شش گروه ساختمان با مقادیر برابر با 4، 5، 5/5، 6، 7 و 8 با ارتفاعهای مختلف (5، 10، 15، 20 و 25 طبقه) طراحی و توسط نرم افزار اپنسیس مدلسازی گردید.سپس تحلیل استاتیکی غیرخطی و تحلیل دینامیکی افزایشی روی سازهها انجام شد .عملکرد لرزهایی ساختمانها با استفاده از منحنیهای شکنندگی و روشFEMA P695 بررسی گردید. نتایج نشان داد که در نظر گرفتن برابر با 5/5 در طراحی قاب خمشی فولادی ویژه برای ساختمانهای کوتاه و میان مرتبه، معیارهای فروریزش FEMA P695 را برآورده نمیسازد. در ساختمانهای طراحی شده با مقادیر برابر با 4، 5 و 5/5 میانگین احتمال فروریزش ساختمانها به ترتیب 4/28%، 2/17% و7/11% به دست آمد که از مقدار مجاز10% بیشتر است، بنابراین قابل قبول نیستند؛ همچنین، مقدار این میانگین در ضرایب برابر با 6، 7 و 8 به ترتیب 3/9%، 2/6% و 1/4% به دست آمدند که کمتر از 10% هستند و نشان دهنده عملکرد قابل قبول این ساختمانها است. بعلاوه، در ساختمانهای بلندمرتبه لزوماً افزایش مقدار بهبودی در رفتار لرزه ایی سازه ایجاد نکرد بنابراین با توجه به اینکه موجب افزایش ابعاد مقاطع و غیراقتصادی شدن طرح گردید، پیشنهاد نمیشود.https://www.jsce.ir/article_140984_6add5a894b0aee0b99f998572831d10a.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Hysteretic behavior study of slit steel plate shear wallsمطالعه رفتار چرخهای پانلهای برشی فولادی شیاردار18220014079210.22065/jsce.2021.299120.2523FAنوید دیلمیدانشجوی دکترای سازه، دانشگاه ارومیه، ارومیه، ایرانمحمدرضا شیدائیاستاد، دانشگاه ارومیه، ارومیه، ایران0000-0002-9606-0205سعید تاریوردیلواستاد، دانشگاه ارومیه، ارومیه، ایران0000000330629216Journal Article20210815Creating slits in steel plate shear walls is a new way to improve the seismic performance of these walls. The creation of slits turns the steel sheet into a number of links, each of which dissipate the seismic energy at both ends of the links. In this study, the effect of slit location and orientation on the cyclic behavior of steel shear panels is considered. For this purpose, in a laboratory study, the effect of slits location in the central area (conventional method), in the middle of the boundary elements or sheet corners on the stiffness, strength and capacity of energy dissipation and drift corresponding to the start of sheet rupture was investigated. Experimental results show that, contrary to the conventional method with slits located in the central area of the sheet, changing the location of the slits leads to a fundamental improvement in the seismic performance parameters of the wall. The best performance is observed for the specimen with slits in the middle of the boundary elements and with parallel set of slits. The increase in the strength and drift is 39 and 100%, respectively, for the specimen with parallel set of slits in the middle of the boundary elements compared to the conventional specimen with slits in the center of the sheet. Better performance could be expected with optimization of slits spacing and patterns.ایجاد شیار در دیوارهای برشی فولادی روشی جدید برای بهبود عملکرد لرزهای این دیوارها محسوب میشود. ایجاد شیار، ورق فولادی را به تعدادی از اجزا رابط شکلپذیر تبدیل مینماید که هر یک از آنها به واسطه تغییر شکل دو انحنایی و ایجاد مفاصل پلاستیک در دو انتهای اجزا رابط، موجب جذب و استهلاک انرژی لرزهای سازه میشوند. در این مطالعه اثر محل قرارگیری و امتداد شیارها روی رفتار چرخهای پانلهای برشی فولادی مورد بررسی قرار گرفته است. برای این منظور طی یک مطالعه آزمایشگاهی، اثر محل قرارگیری شیار در ناحیه مرکزی (روش متداول)، میانه المانهای مرزی یا گوشههای دیوار بر روی سختی، مقاومت و ظرفیت اتلاف انرژی و دریفت متناظر با شروع پارگی ورق مورد بررسی قرار گرفته است. نتایج آزمایشگاهی نشان میدهد که برخلاف روش متداول با شیارهای واقع در ناحیه مرکزی ورق، تغییر محل شیار به پیرامون ورق منجر به بهبود اساسی در پارامترهای عملکرد لرزهای دیوار برشی فولادی میشود. بهترین عملکرد برای حالت شیارهای واقع در میانه المانهای مرزی با امتداد شیارهای موازی مشاهده میشود. میزان افزایش در مقاومت و دریفت شروع پارگی ورق (شروع کاهش مقاومت) به ترتیب 39 و 100 درصد برای نمونه با شیارهای موازی واقع در میانه المانهای مرزی در قیاس با نمونه با شیار در ناحیه مرکزی است. در انتها از مدل اجزا برای صحتسنجی نتایج آزمایشها استفاده شده است. انتظار میرود با بهینهسازی الگو و فواصل شیارها در نمونه مزبور، حتی عملکرد بهتری قابل حصول باشد.https://www.jsce.ir/article_140792_eca0e94a8e272b22583fcbb95da5e16e.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Prediction of shear wave velocity and soil type of the region with recorded accelerometer in Iran plateau using vertical and horizontal seismic components spectral ratiosپیش بینی سرعت موج برشی و نوع خاک منطقه دارای شتابنگاشت ثبت شده در فلات ایران با استفاده از نسبت های طیفی مؤلفه ی قائم و افقی زمین لرزه20122214145910.22065/jsce.2021.281059.2456FAایمان خزاعیدانشگاه صنعتی شاهرودمحمد شامخی امیریاستادیار، دانشکده مهندسی عمران، دانشگاه صنعتی شاهرود، شاهرود، ایرانامیر بذر افشان مقدماستادیار، دانشکده مهندسی عمران، دانشگاه صنعتی شاهرود، شاهرود، ایرانJournal Article20210518Earthquake is a destructive and unpredictable phenomenon that causes a lot of human and financial losses. An overall assessment of the damage to structures and facilities due to earthquakes shows that site conditions have had a significant impact on the distributions of damage. Therefore, identifying the effect of site and soil type in the design and construction of earthquake resistant structures is essential.<br /><br />Due to the fact that soil type has not been determined in many regions of the Iranian plateau, in this study, A relation is presented to determine the shear wave velocity using Horizontal-to-vertical spectrum ratio method (H/V) and the Gene expression programming (GEP).<br /><br />In this study, a suite of 480 records is used. Input factors in this research are moment magnitude, site to source distance, Horizontal-to-vertical spectrum ratio and the time of the maximum amount of H/V ratio. <br /><br />After preparing the input values from the earthquake catalog, finally, GEP method is used to obtain the prediction relationship. <br /><br />The advantage of this algorithm is that a fixed regression model is not used and the model is calculated intelligently. Finally, the results show that the model has a fitness of 911.57 and the shear wave velocity values provided by the relation correspond to 73% with the actual values.زلزله از پدیدههای مخرب و غیرقابل پیش بینی است که خسارات جانی و مالی بسیاری در پی دارد. ارزیابی کلی از خسارات وارده به سازهها و تاسیسات در زلزلهها نشان میدهد که شرایط ساختگاهی تاثیر قابل توجهی بر نحوهی توزیع خرابیها داشته است. لذا شناسایی اثر ساختگاه و نوع خاک در طراحی و ساخت سازههای مقاوم، امری ضروری به شمار میآید. با توجه به اینکه نوع خاک در بسیاری از مناطق فلات ایران تعیین نشده است، در این پژوهش، پیشبینی رابطهای برای تعیین سرعت موج برشی و تعیین نوع خاک منطقه با استفاده از روش نسبت طیفی مؤلفهی افقی به قائم (H/V) و الگوریتم توسعهی ژنی(GEP) مدنظر قرار گرفته است. عوامل مؤثر در این پیشبینی، بزرگای زلزله، فاصلهی منبع زلزله تا ساختگاه، نسبت طیفی مؤلفهی افقی به قائم (H/V) و پریود زمانی نسبت طیفی حداکثر در نظرگرفته شدهاند. در این تحقیق، داده های 480 شتابنگاشت مورد استفاده قرار گرفت. اصلاحات مورد نیاز روی این دادهها صورت گرفته و سپس پارامترهای مورد نظر برای تعیین رابطهی سرعت موج برشی از آن استخراج شده است. پس از آماده سازی مقادیر ورودی الگوریتم از کاتالوگ زلزله، در نهایت برای بهدست آوردن رابطهی پیشبینی از روش هوشمند الگوریتم توسعهی ژنی استفاده شده است. مزیت این الگوریتم در این است که از مدل رگرسیونی ثابتی استفاده نشده است و مدل به صورت هوشمند محاسبه می-گردد. نتایج نشان میدهند که مدل دارای برازندگی 57/911 بوده و مقادیر پیشبینی شده مطابقت 73 درصدی با وضعیت موجود خاک مطابق با استاندارد 2800 دارند. از تعداد 480 رکورد مورد استفاده، روش ارائه شده توانست نوع خاک 350 ایستگاه را به درستی پیش بینی نماید. همچنین مقایسه با سایر روشهای طبقه بندی نشان داد که کمترین تطابق هم دارای دقت بیش از 55 درصدی است.https://www.jsce.ir/article_141459_45283015e8b7c0e15c0b86e947e92fe4.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Performance analysis of various bond-slip models in finite element modelling of reinforced concrete beams strengthened with FRP sheetsتحلیل عملکرد مدل های پیوستگی-لغزش بین بتن و FRP در مدل سازی اجزاءمحدود تیر بتن آرمه تقویت شده با ورق FRP22324314079110.22065/jsce.2021.226508.2119FAآریا صادق عمل نیک رفتاردانشکده مهندسی عمران دانشگاه صنعتی نوشیروانی بابلمهدی دهستانیگروه سازه و زلزله، دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، بابل، ایرانJournal Article20200411The purpose of this study is to analyze the performance of various bond-slip models in modelling of reinforced concrete beams strengthened with FRP sheets. A comprehensive finite element model based on the concrete damage-plasticity behavior has been constructed. The cohesive element is used to model the bond-slip behavior and existing experimental results were used for verification. By comparing the results of the finite element model with the experimental results, the capability of the selected model in predicting beam behavior has been proven. The indent distribution of strains in FRP plates was due to the occurrence of cracks in concrete. With an increase in the loading, both the crack opening and the number of cracked sections in the beam are increased and the indentation state of the strain curves is intensified. On the other hand, the yielding of tensile rebars increases the strain in the FRP sheet. The interfacial shear stress values between FRP sheets and concrete shows high fluctuation at the final stages of loading due to the development of cracks and release of stresses at the crack tip. Maximum slip values between concrete and FRP surface occur near the loading points in which bending moment and shear force are maximum. The obtained load-displacement results showed that Lu-Bilinear and Lu-Simplified models have the best performance in modeling the bond between concrete and FRP sheets and in predicting the failure load of beams, they had On average 3.8% and 6.1% error with respect to experimental results, respectively.هدف این پژوهش آنالیز عملکرد مدلهای مختلف پیوستگی-لغزش در پیشبینی رفتار تیر بتنی تقویت شده توسط ورق FRP میباشد. به منظور درک بهتر مکانیزم جداشدگی در تیرهای بتنی تقویتشده با ورق FRP، از مدل اجزاءمحدود جامعی بر پایهی روش خرابی-پلاستیسیتهی بتن استفادهشدهاست. در این مدلسازی از المان چسبنده برای مدلسازی رفتارپیوستگی بین بتن و میلگرد و بتن و ورق FRP استفادهشدهاست. از نتایج چندین نمونهی آزمایشگاهی تیر بتنی تقویتشده توسط ورق FRP جهت صحتسنجی استفاده شدهاست. با مقایسهی نتایج بهدستآمده از مدل اجزاءمحدود با نتایج آزمایشگاهی توانایی بالای مدل انتخاب شده در پیش-بینی رفتار تیر به اثبات رسیدهاست. توزیع دندانهای کرنشها در صفحات FRP ناشی از وقوع ترکها در بتن میباشد. با ادامه بارگذاری تعداد مقاطع ترکخورده و بازشدگی ترکها افزایش یافته و حالت دندانهای منحنیهای کرنش تشدید میشود. از طرفی تسلیم آرماتورهای کششی ، سبب افزایش ناگهانی کرنش در ورقFRP میشود. مقادیر تنش سطحی بین ورق FRP و بتن در گامهای نهایی بارگذاری به دلیل گسترش ترکها و آزاد شدن تنشها در محل ترک، نوسان زیادی نشان میدهد. بیشترین مقادیر لغزش بین بتن و FRP در نزدیکی نقاط بارگذاریشده روی تیر که نیروی برشی و ممان خمشی در حالت بیشینه بوده رخ میدهد. نتایج نیرو-تغییرمکان بهدستآمده نشاندادند که دو مدل لو-دوخطی و لو-ساده شده در مدلسازیپیوستگی بین بتن و ورق FRP بهترین عملکرد را داشته و در محاسبهی مقادیر بار گسیختگی بهطور میانگین به ترتیب 3.8%و 6.1% خطا نسبت به نتایج آزمایشگاهی داشته-اند.https://www.jsce.ir/article_140791_50c2c874df9373706e146758caa0d111.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39779620220823Introducing the modified Kwok model for magnetorheological dampersمعرفی مدل کوآک اصلاح شده برای میراگرهای حاوی سیال مغناطیسی24426314079010.22065/jsce.2021.296654.2513FAمهدی رشیدی میبدیدانشجوی دکتری مهندسی سازه، گروه مهندسی عمران، دانشکده فنی مهندسی، دانشگاه گیلان، رشت، ایرانآرش بهاراستادیار، گروه مهندسی عمران، دانشکده فنی مهندسی، دانشگاه گیلان، رشت، ایران00000-0003-4341-1566Journal Article20210729The present multidisciplinary study focuses on providing a model for magnetorheological dampers. First, it presented a brief look at the existing models of such dampers, and then to achieve an invertible, efficient, and at the same time simple model, the Kwok model has been selected and has changed appropriately. A new identification algorithm based on meta-heuristic methods has been proposed to identify the model, which has used periodic excitation. This algorithm has high detection capability with the minimum necessary tests. To evaluate the proposed model and identification method, a large-scale magnetorheological damper, which is placed as a black box model in the benchmark base-isolated building introduced by the US Structural Control Committee, has been used as a virtual laboratory. The whole process has been investigated in the Simulink environment of MATLAB. The performance of the proposed model was compared with the original one under seven near-fault earthquakes. The results show that the modified Kwok model is more accurate than the original one. It can predict force-displacement and force-velocity behaviors correctly. Also, since the proposed model is invertible, it is easily applicable in practical issues of structural control. It provides the possibility of managing control devices, so is superior to the Kwok model.مطالعه چند وجهی حاضر، بر ارائه مدلی برای میراگرهای حاوی سیال مغناطیسی متمرکز شده است. از این رو نخست نگاهی اجمالی به مدل های موجود اینگونه میراگرها شده و سپس برای دستیابی به مدلی وارون پذیر، کارآمد و در عین حال ساده برای آنها، مدل کوآک انتخاب و تغییراتی در آن اعمال شده است. نهایتاً برای شناسایی پارامترهای تشکیل دهنده مدل، الگوریتم شناسائی جدیدی، بر اساس روش های فراابتکاری، ارائه گردیده است که از تحریکات متناوب در روند شناسایی خود بهره می گیرد. برای ارزیابی آنچه پیشنهاد شده از یک میراگر حاوی سیال مغناطیسی بزرگ- مقیاسای که به صورت یک مدل جعبه سیاه در ساختمان معیار کف- جدای معرفی شده توسط کمیته کنترل سازه آمریکا معرفی شده، به عنوان آزمایشگاهی مجازی استفاده شده است. مسئله در محیط سیمولینک نرم افزار متلب اجرا شده است. رفتار مدل پیشنهادی تحت هفت زلزله نزدیک گسل بررسی و با مدل اصلی مقایسه شد. نتایج نشان می دهد که مدل پیشنهادی نسبت به مدل اصلی کوآک دارای دقت بیشتری است و به خوبی می تواند رفتار نیرو- تغییرمکان و نیرو- سرعت میراگر را پیش بینی کند. همچنین با توجه به اینکه مدل پیشنهادی دارای قابلیت وارون پذیری است، امکان استفاده در مسائل عملی و اجرایی کنترل سازه را داشته و از این نظر نیز نسبت به مدل کوآک برتری دارد.https://www.jsce.ir/article_140790_5462e90c0a1ace9e1fe579cbddbaa550.pdf