@article { author = {Fayyaz, Mohammad and Abasi, Farbod and Mirmoeini, Sahar and Khosravi, Ferydoon}, title = {Performance Evaluation of Steel Structure With Diverse Dampers Under Blast Load}, journal = {Journal of Structural and Construction Engineering}, volume = {8}, number = {5}, pages = {110-129}, year = {2021}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2019.142140.1615}, abstract = {Nowadays terrorist attacks on civilian facilities have increased.Paying attention to the design of construction sites against the impact loads due to the explosion is important. Identifying the nature of explosive loads and their impact on the structure is one of the important issues to be studied. The explosion is one of the complex phenomena including high strain rate which highly affects the structural elements behavior. Regarding the fact that existing steel structures are typically designed based on conventional gravity and seismic loads, it is required that the performance of these structures be investigated under the explosion load. In this study, the evaluation of simple steel frame behavior with different dampers against explosive load and earthquake is investigated. Nonlinear dynamics analysis is performed on models with 3, 5 and 10 floor structures and in accordance with UFC 3-340-02 at two different levels of explosive charge, in the SAP 2000 software. The results show that between XADAS, friction dampers, Viscose in diagonal system, in the seesaw system, U-shaped with flexural and shear performance and proposed pipe dampers, The displacement dampers have the greatest impact in reducing the structure response. From this Friction damper and pipe and U-shaped with flexural function is more effective.}, keywords = {Blast load,Nonlinear dynamic response,Damper,earthquake,steel structure}, title_fa = {مقایسه پاسخ سازه‌های فولادی با میراگرهای مختلف تحت بار انفجارو زلزله}, abstract_fa = {میراگرهای غیر فعال که در ارتفاع سازه توزیع می‌شوند انرژی جانبی وارد بر سیستم سازه‌ای را متناسب با مشخصات هر یک از اجزاء و ماهیت بار وارده مستهلک می‌نمایند. سه گروه عمده میراگرهای غیرفعال شامل میراگرهای تسلیم شونده، ویسکوز و اصطکاکی است. در این تحقیق رفتار قاب ساده فولادی همراه با میراگرهای XADAS، اصطکاکی و ویسکوز در سیستم قطری و سیستم الاکلنگی، U شکل با عملکرد خمشی-برشی در برابر بارگذاری انفجاری و زلزله مورد بررسی و مقایسه قرار گرفته‌اند. تحلیل دینامیکی غیرخطی بر روی مدل‌های سازه‌ای با تعداد طبقات ۳، ۵ و ۱۰  بر اساس دستورالعمل UFC 3-340- 02 در دو سطح مختلف بار انفجاری و بر اساس آیین نامه 2800 تحت چهار شتاب نگاشت زلزله در نرم افزار SAP 2000 انجام گردید. در ادامه ایده جدید میراگر لوله‌ای در سیستم الاکلنگی مطرح و با سایر میراگرهای مذکور مورد مقایسه قرار گرفت. نتایج نشان داد در بین میراگرهای مورد بررسی، میراگرهای ویسکوز و میراگر U  شکل در قاب‌های با سیستم الاکلنگی، بیشترین تأثیر را به ترتیب در برش پایه و جابه جایی بام تحت نیروی زلزله دارند. همچنین میراگرهای U شکل با عملکرد برشی و میراگر اصطکاکی در قاب‌های تحت انفجار، بیشترین تأثیر را به ترتیب در برش پایه و جابه جایی بام دارند. میراگر لوله‌ای پیشنهادی نیز در کاهش پاسخ قاب‌ها عملکرد مناسبی داشت. مقایسه نتایج مدل با داده‌های آزمایشگاهی صحت مطالعات را تایید می‌نماید.}, keywords_fa = {بار انفجار,پاسخ دینامیکی غیرخطی,میراگر,قاب فولادی}, url = {https://www.jsce.ir/article_96676.html}, eprint = {https://www.jsce.ir/article_96676_9c6cc9c05c4f8527457d866464fb5236.pdf} }