@article { author = {Bahri, Farzad and Kafi, Mohammad Ali and Kheyroddin, Ali}, title = {investigation on novel connection in vertically mixed structures under lateral and axial loads}, journal = {Journal of Structural and Construction Engineering}, volume = {8}, number = {3}, pages = {56-74}, year = {2021}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2019.182540.1836}, abstract = {Vertically-mixed structures are buildings constructed with different materials progressing in the vertical direction. These buildings feature a concrete frame on the lower stories but a steel one on top. Reinforced Concrete (RC) column connected to steel column in story that called transition story. The sudden change of stiffness in the transition story in these structures and the mass irregularity prompted research attempts concerning the response modification factor and the analytical period of the structures. There isn’t much research on this issue. Due to below concrete column dimensions upper steel column dimension is limited. To accurately study the transfer of loads, the stiffness of the transition story column, and its failure and seismic behavior, this study investigates full-scale experimental a test specimen under axial and lateral cyclic load. Proposed connection in this study that called trough bolt lap connection had good behavior in seismic load up to 4% drift ratio. No sign of failure and stiffness reduction observed in test results. Analytical finite element study is done for verification and parametric study in transition story column in variable axial load and longitudinal bars ratio to grass section of concrete. Studies have shown no failure in the column connection. Column had force-control behavior in lateral loads.}, keywords = {Vertically mixed structures,Column Connection,Transition Story,experimental study,Finite Element}, title_fa = {معرفی و بررسی اتصال جدید ستون طبقه انتقالی در ساختمان های ترکیبی در ارتفاع}, abstract_fa = {ساختمان‌هایی که در طبقات آن‌ها نوع مصالح سازه تغییر کند، ساختمان‌های ترکیبی در ارتفاع نام دارند. معمولاً در این ساختمان‌ها طبقات پایین از نوع اسکلت بتنی و طبقات بالا از نوع اسکلت فولادی می‌باشند. به دلیل تغییر سختی آنی در طبقه انتقال و نامنظمی جرمی تحقیقاتی در مورد این ساختمان‌ها درباره ضریب رفتار، زمان تناوب نوسان تحلیلی سازه‌های ترکیبی انجام‌شده است، اما در مورد نحوه اتصال سازه فولادی و بتنی در ارتفاع تحقیقات چندانی وجود ندارد. همانند ستون‌های فولادی بر روی فونداسیون بتنی صفحه‌ستون و اتصال هر ابعادی نمی‌تواند داشته باشد و محدود به ابعاد ستون بتن تحتانی می‌باشد. ازاین‌روی ضوابط آئین‌نامه‌ها برای جزئیات اتصال صحیح و انتقال بار مناسب از سازه فولادی به بتنی پیشنهادی ارائه نکرده‌اند که به دلیل تغییر ناگهانی سختی و مکانیزم انتقال نیرو از ستون‌های سازه فولادی به بتنی این اتصال بسیار حائز اهمیت می‌باشد. ازاین‌روی در این تحقیق به بررسی آزمایشگاهی 1 نمونه آزمایشگاهی تمام‌مقیاس تحت بار محوری و جانبی چرخه‌ای و بررسی عددی اجزاء محدود آن در طبقه انتقالی انجام‌شده است. همچنین پس از صحت سنجی مدل عددی با نمونه آزمایشگاهی، پارامترهای بار محوری، درصد نسبی آرماتور به سطح بتن نمودار نیرو- تغییر مکان ارائه شده است. این تحلیل نشان داد خرابی در اتصال ستون رخ نداده و ستون و اتصال آن نیرو کنترل عمل نموده است.}, keywords_fa = {ساختمان ترکیبی در ارتفاع,اتصال ستون,ستون طبقه انتقالی,تحلیل اجزا محدود,مطالعه آزمایشگاهی}, url = {https://www.jsce.ir/article_88372.html}, eprint = {https://www.jsce.ir/article_88372_9ea38a81ae6b0ae06307d619eccae5f0.pdf} }