@article { author = {Alikhani Dehaghi, Mohammad and Ghodrati Amiri, Gholamreza and Zare Hosseinzadeh, Ali and Seyed Razzaghi, Seyed Ali}, title = {Damage identification in cable-stayed bridges using modal data}, journal = {Journal of Structural and Construction Engineering}, volume = {7}, number = {2}, pages = {24-45}, year = {2020}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2018.127340.1523}, abstract = {In this study, damage detection methods of cable stayed bridges were investigated. Cable stayed bridges are flexible structures; meanwhile they are sensitive to vibrations due to their complicated and multiple vibrations modes; therefore, damage detection methods based on vibration data in cable-stayed bridges has become a challenging issue. In the present study, finite element model of Bill Emerson, Missouri cable stayed bridge was simulated in order to achieve a precise finite element model to simulate the damage scenarios in bridge and the study of them. General process includes four damage detection indices based on the modal data (mode shapes and natural frequencies) achieved by modelling structure and simulated damages and in each case the results of damage detection were presented by indices. These methods are: Enhanced Coordinate Modal Assurance Criterion (ECOMAC), Mode Shape Curvature (MSC), Modal Flexibility Index (MFI), Damage Index (DI). Some of the methods were applied in damage detection of the pervious structures and bridges. In this paper, correlative study of these methods were performed based on different damage scenarios as well as study of challenges such as different levels of random noise in the input data, incomplete modal data and low damage intensity in detection of damage in cable-stayed bridge and then, performance of the methods were assessed.}, keywords = {Structural damage detection,Modal data,Cable-stayed bridges,Finite element model,Mode shape curvature,Modal Flexibility Index}, title_fa = {شناسایی آسیب در پل‌های کابلی با استفاده از اطلاعات مودال}, abstract_fa = {در این مطالعه به بررسی روش‌های شناسایی آسیب در پل‌های کابلی پرداخته شده است. پل‌های کابلی سازه‌هایی انعطاف پذیر هستند که در عین حال، از لحاظ لرزه‌ای نیز بسیار حساس می‌باشند. به‌علت رفتار ارتعاشی پیچیده‌ی حاکم بر پل‌های کابلی، همواره استفاده از روش‌های شناسایی آسیب بر پایه‌ی اطلاعات ارتعاشی در پل‌های کابلی با چالش‌هایی جدی روبرو بوده است. در این مطالعه، به مدل‌سازی، آنالیز و تشخیص آسیب در یک نمونه از پل‌های کابلی (پل کابلی بیل ‌امرسون در ایالت میسوری) پرداخته شده است. در ابتدا، یک مدل اجزای محدود دقیق و صحیح برای شبیه‌سازی و مطالعه‌ی حالات مختلف آسیب در پل، ارائه شده است. سپس، مساله‌ی شناسایی آسیب مورد مطالعه قرار گرفته است. روند کلی کار به‌این صورت است که از چهار شاخص شناسایی آسیب براساس اطلاعات مودال (مود شکل‌ها و فرکانس‌های طبیعی) استفاده و در هر مورد، نتیجه‌های شناسایی آسیب توسط شاخص‌های مربوط ارائه شده‌اند. این روش‌ها شامل شاخص هم‌بستگی اطمینان مودال بهبود یافته، شاخص خرابی، انحنای مودال، شاخص انعطاف‌پذیری مودال می‌باشند. تعدادی از این روش‌ها برای شناسایی آسیب در سازه‌ها و پل‌ها در گذشته به‌کار برده شده‌اند. در این مقاله، به بررسی مقایسه‌ای این روش‌ها تحت الگو‌های مختلف آسیب و همچنین بررسی قوت روش‌ها تحت چالش‌هایی نظیر وجود نوفه‌های تصادفی در داده‌های ورودی، اطلاعات مودال ناقص و توانایی شناسایی آسیب‌ها با شدت کم در پل‌های کابلی پرداخته شده است و در ادامه، کارایی روش‌ها مورد ارزیابی قرار گرفته است.}, keywords_fa = {شناسایی آسیب در سازه‌ها,اطلاعات مودال,پل کابلی,مدل اجزا محدود,شاخص انحنای مودال,شاخص انعطاف‌پذیری مودال}, url = {https://www.jsce.ir/article_67252.html}, eprint = {https://www.jsce.ir/article_67252_2edd4b91d2a53ea62883042d4ffe5150.pdf} }