@article { author = {Nabavi, Seyed Mehdi and Pourabdol, Amin and Jamal-Omidi, Majid}, title = {Numerical study of the effect of the composite patches on the stress intensity factors for a circumferential fully crack in pipes}, journal = {Journal of Structural and Construction Engineering}, volume = {7}, number = {1}, pages = {240-254}, year = {2020}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2018.112332.1415}, abstract = {The purpose of this paper is to reinforce the pressurized pipe containing a fully circumferential crack (internal and external) using composite patches due to their remarkable properties. In the research procedure, in order to validate the proposed models, firstly, a cylindrical pipe with a circumferential crack subjected to the uniform tension was modeled and the results of stress intensity factors were compared with an existing paper. Then, in order to examine the modeling process of composite patch and adhesive, a damaged plate with a central crack was considered and the results of stress intensity factors were investigated and evaluated. Stress intensity factor at the crack tip was calculated using the J-integral. In this regard, using the 3D finite element method, the stress intensity factors in the crack before and after the pipe repair were evaluated with boron/epoxy, carbon/epoxy and glass/epoxy composite patches. The crack geometries correspond to different relative depths from 0.4 to 0.8. The results showed that the use of composite patches significantly decreased the stress intensity factors, and this reduction in the external circumferential cracks is more than the internal ones. Also, in the research process, the effect of the patch thickness, the angle of the fiber and the adhesive material on the stress intensity factors has been investigated.}, keywords = {Fully circumferential crack (internal and external),Stress intensity factor,Composite patch,Repair,The Finite element,Cylindrical pipe}, title_fa = {بررسی عددی اثر وصله‌های کامپوزیتی بر ضرایب شدت تنش لوله‌های استوانه‌ای حاوی ترک محیطی کامل}, abstract_fa = {هدف از این مقاله مقاوم سازی لوله‌ها‌ی استوانه‌ای حاوی ترک محیطی کامل (داخلی و خارجی) تحت فشار داخلی با استفاده از وصله‌های کامپوزیتی به دلیل خواص بارزشان می‌باشد. در فرآیند تحقیق به منظور اعتبار بخشی مدل‌های پیشنهادی، ابتدا لوله استوانه‌ای حاوی ترک محیطی تحت کشش یکنواخت، مدل سازی و نتایج ضرایب شدت تنش با مقاله موجود مقایسه شده است. سپس به منظور اثبات صحت روند مدل سازی وصله کامپوزیتی و چسب، ورق آسیب دیده حاوی ترک مرکزی مدل‌سازی و نتایج ضرایب شدت تنش با مقاله موجود مورد بررسی و ارزیابی قرار گرفته است. محاسبه ضرایب شدت تنش در نوک ترک با بهره گیری از انتگرالJ حاصل شده است. پس از اثبات روند شبیه سازی در دو مرحله به بررسی عملکرد لوله‌های استوانه‌ای با ترک محیطی داخلی و خارجی کامل با ترک‌هایی با عمق نسبی 4/0 تا 8/0 با استفاده از روش اجزای محدود سه بعدی تحت فشار داخلی، قبل و پس از ترمیم پرداخته شده است. در پروسه ترمیم از کامپوزیت‌های بور/اپوکسی، کربن/اپوکسی و شیشه/اپوکسی استفاده است. نتایج تحقیق نشان داد استفاده از وصله‌های کامپوزیتی به میزان قابل توجهی ضرایب شدت تنش را کاهش داده و این کاهش در لوله‌ حاوی ترک محیطی خارجی کامل بیشتر از لوله حاوی ترک محیطی داخلی کامل می‌باشد. همچنین در فرآیند تحقیق تأثیر ضخامت وصله، زاویه قرارگیری الیاف و جنس چسب بر ضریب شدت تنش مورد بررسی قرار گرفته است.}, keywords_fa = {ترک محیطی کامل (داخلی-خارجی),ضریب شدت تنش,وصله کامپوزیتی,ترمیم,روش اجزاء محدود,لوله‌ی استوانه‌ای}, url = {https://www.jsce.ir/article_65310.html}, eprint = {https://www.jsce.ir/article_65310_ff19f138cc37346b0628dcfdcd5684f7.pdf} }