@article { author = {Najafgholipour, M. A. and Hadianfard, M.A. and malekjamshidi, sh and Dehghan, Seyed Mehdi}, title = {Match Compliance of Conventional Design Codes with Instructions for Seismic Rehabilitation of Buildings in Performance Evaluation of Steel Moment Frames}, journal = {Journal of Structural and Construction Engineering}, volume = {6}, number = {شماره 2}, pages = {21-38}, year = {2019}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2018.96056.1300}, abstract = {Today, instructions for seismic rehabilitation of existing buildings are widely used for seismic performance evaluation of existing buildings. Moreover, nonlinear structural analysis methods are permitted for seismic design of new buildings in recent versions of seismic design codes in some countries, such as Iran. Therefore, match compliance of conventional design codes with instructions for seismic rehabilitation of existing buildings is of great importance. On the other hand, four different analysis methods are available in seismic rehabilitation instructions that compatibility of these analysis techniques can be evaluated. In this regard, seismic performance of three buildings with steel moment frames as lateral load resisting system with 4, 8 and 12 stories that were designed previously according to conventional seismic design codes with two levels of ductility (Intermediate and Special) were evaluated using seismic vulnerability assessment instruction in Iran (Code No. 360) by means of four analysis procedures. Analysis results indicate that conventional seismic design codes are more conservative than Code No. 360. In other words, design of steel moment frames with conventional design codes leads to stronger beams and columns. This phenomenon can be due to controlling lateral interstory drift and weak beam-strong column criterion in moment frames that control final design of these structures.}, keywords = {Steel moment frame,Seismic Performance,Seismic Design,Nonlinear analysis,Linear analysis}, title_fa = {بررسی تطبیقی آیین نامه های متداول طراحی با دستورالعمل های بهسازی لرزه ای در ارزیابی عملکرد قاب های خمشی فولادی}, abstract_fa = {با توجه به گسترش استفاده از دستورالعمل های بهسازی لرزه ای برای ارزیابی سطح عملکرد ساختمان های موجود در سراسر جهان و همچنین اشاره به استفاده از تحلیل های غیرخطی در طراحی سازه های جدید در ویرایش های جدید آیین نامه های طراحی لرزه ای برخی از کشورها، بحث تطبیق این مدارک با یکدیگر از اهمیت ویژه ای برخوردار است. با توجه به معرفی چهار روش مختلف تحلیل در دستورالعمل بهسازی لرزه ای ساختمان های موجود (نشریه 360)، سازگاری این روش ها نیز در تعیین سطح عملکرد ساختمان های موجود قابل بررسی است. از این رو در این تحقیق در راستای پاسخ به دو سوال فوق در ساختمان های با سیستم باربر قاب خمشی فولادی، عملکرد لرزه ای سه ساختمان فولادی با پلان مشابه شکل پذیری ویژه و متوسط که با استفاده از آیین نامه های رایج طراحی سازه های فولادی (مبحث دهم مقررات ملی ساختمان) طراحی شده بودند، با استفاده از چهار روش تحلیل پیشنهادی در نشریه 360 مورد ارزیابی قرار گرفت. نتایج حاصل از این تحقیق نشان می دهد که به طور کلی نشریه 360 نسبت به آیین نامه های مرسوم طراحی سازه های فولادی مانند مبحث دهم مقررات ملی ساختمان، برای سازه ساختمان های جدید منجر به مقاطع سبک تری می شود. به عبارت دیگر آیین نامه های طراحی لرزه ای نسبت به آیین نامه های بهسازی دارای ضوابط سختگیرانه تری می باشند. این امر می تواند به دلیل کنترل معیار تغییرشکل نسبی جانبی طبقات در آیین نامه های طراحی ساختمان های جدید یا دیگر کنترل های مضاعف لازم باشد که در ساختمان های فولادی با قاب خمشی کنترل کننده طرح هستند.}, keywords_fa = {قاب خمشی فولادی,عملکرد لرزه ای,طراحی لرزه ای,تحلیل غیرخطی,تحلیل خطی}, url = {https://www.jsce.ir/article_55850.html}, eprint = {https://www.jsce.ir/article_55850_9fcbf579e49f98283a563262b8d5837a.pdf} }