@article { author = {Ebadi Jamkhaneh, Mehdi and Kafi, Mohammad Ali and Kheyroddin, Ali}, title = {Experimental and numerical investigations of partially encased composite columns under axial load}, journal = {Journal of Structural and Construction Engineering}, volume = {5}, number = {شماره ویژه 4}, pages = {58-72}, year = {2019}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2017.92721.1264}, abstract = {In current international practice, composite construction is gaining importance in industrial buildings and in particular in high-rise buildings. Partially encased composite (PEC) columns are one of the recent developments in composite column. Using composite columns have several advantages such as an increased speed of erection compared to reinforced concrete (RC) columns, a more cost-effective design, smaller cross-section dimensions for similar axial resistance, and a better resistance to fire and local buckling than for steel only columns in compare with traditional RC or steel only columns. One of the proper sections for columns is a cross-sectional shape that can be used in these columns. In this paper, experimental and numerical studies are carried out on three PEC columns under pure compression load. The main difference between the specimens is in the reinforcement details of the concrete. Parameters studied in numerical work, details of reinforcement, failure mode, width to thickness ratio of steel flange and distance and transverse link diameter. The results are presented in the form of axial load-displacement curves. Also, the values of experimental work were compared with the relations between the two European and Canadian regulations, which indicated that the Canadian code was conservative. The results were developed in a numerical section after validation with a laboratory specimens and the load-bearing capacity and deformation were evaluated. The evident buckling pattern in the specimens was the kind of rupture of the welds of the links and the local buckling of the flange plate between the two links. Also, the bigger interval between the two links caused an early local buckling in the specimen.}, keywords = {Partially encased composite column,Load-bearing capacity,Local buckling,Cross section,Transverse link}, title_fa = {بررسی آزمایشگاهی و عددی رفتار ستون های مختلط نیمه مدفون تحت بار محوری}, abstract_fa = {اعضای مختلط فولادی نیمه مدفون در دهه های اخیر مورد توجه در ساخت سازه ها قرار گرفته است. یک عضو با محصورشوندگی نسبی مزایایی از قبیل مقاومت خمشی بالا، حجم قالب بندی پایین، امکان اجرای ساده تر (راحت تر) اتصالات، سهولت مقاوم سازی، افزایش تعداد اتصالات و مقاومت در برابر آتش را داراست. یکی از مقاطع مناسب برای ستون ها، مقطع صلیبی شکل است که می تواند در این ستون ها مورد استفاده قرار گیرد. در این تحقیق، مطالعه آزمایشگاهی و عددی بر روی سه ستون مختلط نیمه مدفون تحت بار فشاری خالص انجام می‌شود. تفاوت اصلی بین نمونه ها در جزدیات مسلح سازی مقطع و بتن است. پارامترهای مورد مطالعه در کار عددی، جزئیات مسلح سازی، مود تسلیم، نسبت عرض به ضخامت بال مقطع فولادی و فاصله و قطر لینک های عرضی است. نتایج در قالب نمودارهای نیرو-تغییرمکان محوری ارائه شدند. همچنین مقادیر حاصل از کار آزمایشگاهی با روابط دو آئین‌نامه اروپا و کانادا مقایسه شد که نشان از دست پایین بودن آئین نامه کانادا داشت. نتایج در بخش عددی، پس از اعتبار سنجی با نمونه ی آزمایشگاهی توسعه داده شد و ظرفیت و شکل پذیری نمونه ها مورد ارزیابی قرار گرفت. مود کمانشی مشهود در نمونه ها از نوع پارگی جوش لینک ها و کمانش موضعی ورق بال بین دو لینک بود. همچنین فاصله ی زیاد دو لینک از یکدیگر باعث بروز کمانش موضعی زودهنگام در نمونه شد.}, keywords_fa = {ستون مختلط نیمه مدفون,ظرفیت باربری,کمانش موضعی,مقطع صلیبی,لینک عرضی}, url = {https://www.jsce.ir/article_50758.html}, eprint = {https://www.jsce.ir/article_50758_e14b7f044dc53e8d773087fdbd12b711.pdf} }