@article { author = {Golpayegani, Mahdi and Mortezaei, Alireza}, title = {The effect of moment redistribution on the stability of reinforced concrete moment resisting frame buildings under the ground motion}, journal = {Journal of Structural and Construction Engineering}, volume = {4}, number = {2}, pages = {68-84}, year = {2017}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2017.74562.1054}, abstract = {In recent years some studies have been done on the moment rredistribution in buildings and new methods offered for calculating of redistribution. Observations demonstrated that the combination of moment and shear force is important in analysis of reinforced concrete structures. But little research is done about the effect of redistribution by using moding in software. In order to study the effect of moment redistribution on the stability of RC moment resisting frame structures, four buildings with 4, 7, 10 and 13 story have been considered. In these models, the nonlinear behavior of elements (beam and column) is considered by the use of interaction PMM hinges. The average plastic rotation was calculated by performing pushover analysis and storing stiffness matrix for 5 points and then the buckling coefficients were obtained by conducting buckling analysis. By the use of modal analysis natural frequency was calculated and it was attempted to be related the average plastic rotation with the buckling coefficients and the natural frequency.   It could be concluded that increase in the plastic rotation reduce the buckling coefficients to about 96% which this amount of reduction is related to the average plastic rotation. Moreover, the buildings experience instability state when the average plastic rotation reached to 0.006 radian.}, keywords = {plastic rotation,Buckling Stability,Buckling Analysis,Modal Analysis,Nonlinear time history analysis,Stability index}, title_fa = {تأثیر بازتوزیع لنگر بر پایداری ساختمان های بتن آرمه قاب خمشی تحت اثر زمین لرزه}, abstract_fa = {تحت اثر زمین‌لرزه‌های قوی پاسخ دینامیکی سازه از محدوده خطی و الاستیک عبور نموده و وارد ناحیه غیرالاستیک می‌شود. به منظور اطمینان از ایمنی سازه‌ها در ناحیه غیرالاستیک، پایداری و رفتار غیرخطی سازه می‌بایست به دقت مورد بررسی قرار گیرد. در ساختمان­های بتن‌آرمه هنگامی که فولاد کششی تسلیم می‌شود، سختی مقطع کاهش یافته و به تبع آن با افزایش بار، انتقال نیروهای داخلی به نواحی سخت‌تر صورت می‌گیرد. در حالیکه تغییرشکل در ناحیه بحرانی به طور قابل‌ملاحظه‌ای افزایش می‌یابد، بازتوزیع نیروها تا حصول ظرفیت تغییرشکل در مقطع ادامه می‌یابد. ازاینرو ظرفیت دوران پارامتر کلیدی در بازتوزیع لنگر و پایداری سازه می‌باشد. لذا به منظور بررسی اثر بازتوزیع لنگر بر پایداری ساختمان­های بتن­آرمه با سیستم قاب خمشی در این مقاله 4 مدل ساختمانی، با تعداد طبقات 4، 7، 10و 13طبقه در نظر گفته شده است. در این سازه­ها رفتار غیرخطی اجزای اسکلتی توسط مفصل اندرکنشی PMM در نظر گرفته شده است. با انجام تحلیل تاریخچه­زمانی غیرخطی تحت اثر هفت رکورد زمین‌لرزه و همچنین تحلیل بارافزون و ذخیره نمودن ماتریس سختی برای 5 نقطه، میانگین دوران پلاستیک و با انجام تحلیل کمانش ضرایب کمانش به دست آمده است. با استفاده از تحلیل مودال، فرکانس طبیعی محاسبه و سعی گردید ارتباط منطقی بین دوران پلاستیک با ضرایب کمانش و فرکانس طبیعی برقرار گردد. نتایج نشان دادند با افزایش مقدار دوران پلاستیک ضرایب کمانش تا حدود 96 درصد کاهش می­یابد. هنگامی که میانگین دوران پلاستیک برابر 006/0 رادیان شود سازه وارد حالت ناپایدار می‌گردد. در سازه­های 4 و7  طبقه، مود اول کمانش باعث ناپایداری سازه شده و در سازه­های 10 و13 طبقه مود دوم هم در ناپایداری سازه اثرگذار بوده است.}, keywords_fa = {دوران پلاستیک,پایداری کمانشی,تحلیل کمانش,تحلیل مودال,تحلیل تاریخچه زمانی,شاخص پایداری}, url = {https://www.jsce.ir/article_44838.html}, eprint = {https://www.jsce.ir/article_44838_4cf4b2386976c227b90c9adc1d15dcd0.pdf} }