@article { author = {Esnaashari, Ali and Mohebkhah, Amin}, title = {An investigation on the effect of gusset plate connection rigidity on the seismic behavior of special concentrically braced frames}, journal = {Journal of Structural and Construction Engineering}, volume = {3}, number = {3}, pages = {128-142}, year = {2016}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2016.40261}, abstract = {Special concentrically braced frames (SCBFs) are commonly used to resist lateral loads in buildings. The bracing system sustains large deformations due to inelastic behavior in bracing members (buckling and yielding in tension). Generally, in the conventional modeling strategy, the effect of gusset plates in providing beam-column connections rigidity and hence, improving the post-buckling performance of these frames is not taken into account. This paper deals with the effect of gusset plate rigidity on the seismic behavior of SCBFs using Roeder’s proposed model in the literature. In this paper, four 3, 6, 9 and 12-story SCBFs were designed and modeled using two distinct methods: conventional method with hinged connections and Roeder’s method with semi-rigid connections. Then, the models behavior was investigated with both pushover analysis and nonlinear time-history analysis using OpenSees software. The results showed that lateral load capacity of the frames modeled with the Roeder’s proposed model are about 10% larger than the conventional method’s capacity. Also, it was found that the semi-rigid model leads to a less drift ratios and more overstrength factors.}, keywords = {Special concentrically braced frames (SCBFs),seismic behavior,gusset plate,propose model,nonlinearanalysis}, title_fa = {یادداشت پژوهشی: ارزیابی تاثیر صلبیت ورق اتصال مهاربند در رفتار لرزه ای قاب‌های مهاربندی ویژه}, abstract_fa = {در طراحی سازه‌های واقع در شهرهای کوچک به منظور مقاومت در برابر بارهای جانبی عموما از سیستم مهاربندی همگرای ویژه استفاده می‌گردد. این سیستم مهاربندی از طریق رفتار غیرالاستیک در مهاربند (کمانش و تسلیم کششی) متحمل تغییرشکل‌های بزرگی میشود. در مدل‌سازی های رایج، معمولا اثر ورق اتصال مهاربند در تامین صلبیت اتصالات تیر به ستون و در نتیجه بهبود عملکرد سیستم مهاربندی در رفتار پس کمانشی آن در نظر گرفته نمی‌شود. در این مقاله با استفاده از روش پیشنهادی رودر در مدل‌سازی ورق اتصال، به بررسی اثر صلبیت ورق اتصال در رفتار لرزه‌ای سیستم مهاربندی همگرا پرداخته شده است. برای این منظور، چهار قاب 3، 6، 9 و 12 طبقه یک بار به صورت رایج (مفصلی) و یک بار با استفاده از روش پیشنهادی رودر مدل‌سازی شده و سپس توسط نرم افزارOpenSees تحت تحلیل‌های غیر خطی استاتیکی و دینامیکی تاریخچه زمانی قرار گرفته‌اند. نتایج نشان می‌دهد که در قاب‌های مدل‌سازی شده به روش رودر ظرفیت باربری بیشتر، دریفت‌های کلی و میان طبقه‌ای کمتر و پایداری بیشتر است. همچنین مشاهده شد در این قاب‌ها ضریب رفتار و ضریب اضافه مقاومت ستون‌ها بیشتر می‌باشد.}, keywords_fa = {سیستم مهاربندی همگرا ویژه,رفتار لرزه‌ای,ورق اتصال,روش پیشنهادی,تحلیل‌های غیرخطی}, url = {https://www.jsce.ir/article_40261.html}, eprint = {https://www.jsce.ir/article_40261_80b9d63ed9553420a11a4925472df058.pdf} }