@article { author = {Salehi Rad, Farhad and sabouri, jamshid and Behrouz Sarand, Fariba and Soltani Jighe, Hosein}, title = {Evaluation of seismic behavior of shear walls with curved foundation}, journal = {Journal of Structural and Construction Engineering}, volume = {9}, number = {3}, pages = {149-164}, year = {2022}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2021.289202.2468}, abstract = {Shallow foundation rocking movement include the nonlinear behavior of the foundation and soil material during strong earthquake motions that it has been proposed by researchers in recent years as a change in traditional design. In this research, the performance of rocking motion and flexibility of shallow foundations with curved surface have been discussed. For this purpose, the behavior of this type compared to normal shallow foundation and its effect on the behavior of concrete wall-foundation system with different aspect ratios have been studied. Six models of shear wall system with simple and curved foundation modeled by BNWF (Beam on Nonlinear Winkler Foundation) method in OpenSees software. In BNWF method, a series of distributed independent nonlinear soil springs are generated along the footing length and connected to footing elements to simulate the foundation movement including sliding, rocking and settlement. For investigation the behavior of wall-foundation system the pushover and force-settlement curves are extracted. In the results obtained from OpenSees software, the curved foundation with shear wall has lower base shear and ultimate settlement than a simple foundation that with increasing shear wall height the base shear difference was 30 percent increased. In the time history analysis results was observed that the maximum base shear was decreased between 14 to 17 percent in the system with curved foundation, and also has lower critical contact area that with increasing shear wall height was decreased and self-centering coefficient of wall-foundation system was increased.}, keywords = {curved shallow foundation,rocking,BNWF method,Pushover,self-centering coefficient}, title_fa = {بررسی رفتار لرزه‌ای دیوار برشی با پی انحنادار}, abstract_fa = {حرکت گهواره‌ای پی شامل رفتارهای غیرخطی هندسی پی و مصالح خاک در حین تحریکات قوی لرزه‌ای می‌باشد که در سال‌های اخیر توسط محققین به عنوان تغییری در طراحی سنتی مطرح شده است. در این تحقیق، عملکرد حرکت گهواره‌ای و انعطاف‌پذیری پی‌های سطحی با سطح انحناءدار مورد بررسی قرار گرفته است. بدین منظور، رفتار این نوع پی‌ها در مقایسه با پی‌های سطحی معمولی و تأثیر آن بر نحوه رفتار روسازه به صورت پی و دیوار برشی بتنی با نسبت‌های ابعادی متفاوت مطالعه شده است؛ شش مدل سیستم دیوار برشی با دو نوع پی ساده و انحناء‌دار در نرم‌افزار OpenSees به روش تیر بر فونداسیون وینکلر غیرخطی ((BNWF مدل‌سازی شده است. در روش BNWFیک سری فنرهای مستقل غیرخطی برای در نظرگرفتن رفتار خاک در زیر پی قرار می‌گیرند که به اعضای پی متصل می‌گردند تا نشست، لغزش و حرکت گهواره‌ای پی را مدل‌سازی نمایند. برای بررسی رفتار سیستم پی-دیوار منحنی‌های پوش‌آور و نیرو-نشست استخراج می‌گردند. نتایج حاصل از نرم‌افزار OpenSees نشان داد که سیستم پی انحناء‌دار دارای برش پایه و نشست-های نهایی کمتر نسبت به سیستم با پی ساده می‌باشد که با افزایش ارتفاع دیوار برشی، میزان کاهش در مقدار برش پایه افزایش می-یابد؛ همچنین سیستم پی انحناء‌دار با دیواربرشی در مقایسه با پی تخت دارای نسبت سطح تماس بحرانی کمتری بوده که با افزایش ارتفاع دیوار برشی مقدار آن کاهش و مقدار ضریب خودبازگشتی سیستم پی-دیوار افزایش می‌یابد.}, keywords_fa = {پی‌های سطحی انحنادار,حرکت گهواره‌ای,روش BNWF,تحلیل پوش‌آور,ضریب خودبازگشتی}, url = {https://www.jsce.ir/article_139567.html}, eprint = {https://www.jsce.ir/article_139567_d8945f97cd88c28316c44d8f066231e4.pdf} }