@article { author = {Safikhani, Hossein and Eslami, Abolfazl and Ganjian, Navid and Bahmanpour, Amin}, title = {Laboratory Study of the Helical Piles Behavior Under Reciprocal Loading Via Frustum Confining Vessel (AUT-FCV)}, journal = {Journal of Structural and Construction Engineering}, volume = {8}, number = {شماره ویژه 3}, pages = {378-396}, year = {2021}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2021.247246.2232}, abstract = {Pile foundations are one of the significant marine substructure systems for a variety of offshore and onshore facilities. In recent years, helical piles have become common foundation system for marine structures exposed to the reciprocal seawater waves. Moreover, these foundation systems have received particular attention due to several influential parameters, including the limited required time for installing and the ability to be immediately loaded after installation. However, the methods for estimating their bearing capacity is limited. The present study investigates the behavior of three different helical piles under tensile and compressive loading via Frustum Confining Vessel available at Amirkabir University of Technology (FCV-AUT). The under-study piles were single, double, and triple-helix with diameters of 70 and 90 mm. Double and triple-helix piles are designed with two different spacing to helix diameter ratios of 1.5 and 3. These piles were installed in Bandar Anzali sand regarding two loose and medium densities. The soil was prepared by adding 4% humidity for testing. The applied bottom pressure of FCV-AUT was 200 kPa. The results indicated that the helical pile bearing capacity increased due to soil improvement and densification during the special installation procedure. However, during the reciprocal loading, the tensile capacity of helical piles was reduced.}, keywords = {Helical Piles,FCV physical modeling,Bearing Capacity,tension loading,compression loading,reciprocal loading}, title_fa = {مطالعه آزمایشگاهی اثر بارگذاری در حالت رفت و برگشت بر شمع های پیچشی پره ای درمدل فیزیکی FCV}, abstract_fa = {استفاده از شمع‌های پیچشی پره‌ای در سالهای اخیر در فونداسیون سازه‌های دریایی که درمعرض امواج رفت و برگشتی آب دریا قرار دارند، رواج زیادی پیدا نموده است. از طرفی به دلیل زمان اندک مورد نیاز برای نصب در زمین و قابلیت بارگذاری بلافاصله بعد از نصب، سرعت احداث فونداسیون و نصب و تسریع در برپایی سازه اصلی مورد توجه خاص قرار گرفته است. در تحقیق حاضر به منظور بررسی رفتارشمع‌های پیچشی پره‌‌ای تحت بارگذاری کششی و فشاری‌، سه تیپ شمع پیچشی بصورت تک پره ، دو پره و سه پره، با اقطار 70 و 90 میلیمتر و نسبت فاصله بین پره‌ها به قطر آنها در اندازه‌های 5/1 و 3 تحت آزمایش قرار گرفتند. خاک مورد آزمایش ماسه بندر انزلی بوده و با اعمال رطوبت 4 درصد ، در تراکم‌های سست و متوسط ارزیابی‌ها صورت گرفتند. فشار کف اعمال شده در دستگاه فشار همه جانبه مخروطی دانشگاه صنعتی امیرکبیر (FCV-AUT) برابر با 200 کیلوپاسکال بوده است. نتایج نشان داد که اینگونه شمع‌ها در بارگذاری فشاری و کششی رفتار مناسبی داشته و در اثر بهسازی و افزایش تراکم خاک‌، ظرفیت باربری بطور قابل ملاحظه‌ای افزایش یافت. ولیکن رفتار شمع‌های پیچشی پره‌ای در اثر توالی بارگذاری فشاری و کششی، رفتار کاهشی داشته است.}, keywords_fa = {شمع های پیچشی پره ای,دستگاه مدل فیزیکی FCV,ظرفیت باربری,بارگذاری فشاری,بارگذاری کششی,بارگذاری رفت و برگشتی}, url = {https://www.jsce.ir/article_122870.html}, eprint = {https://www.jsce.ir/article_122870_aa6d27252fefec328cbd850687d82289.pdf} }