@article { author = {ChamanLaleh, Ali and Khosravi, Freydoon and Amini, Mostafa}, title = {Study on the Simulation parameters in meso scale concrete model}, journal = {Journal of Structural and Construction Engineering}, volume = {8}, number = {شماره ویژه 3}, pages = {135-161}, year = {2021}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2020.195259.1905}, abstract = {Numerical models are feasible approach against field studies which are capable of estimating of materials behavior appropriately if material properties are considered exactly. Numerical models are categorized in three sets: Micro, meso and Macro scale. In macro scale, the whole concrete is considered as a one phase material and usually the interaction between concrete-steel is just modeled. In Micro Scale Modelling, the cement-aggregate crystals are evaluated. The other preference of meso scale numerical model is the ability of presenting different phases interaction in multi phase materials such as concrete. This feature is useful in high rate dynamic load such as explosion. To perform meso scale modeling, different random specimens with different contents of aggregates must be produced. In different studies, a unique pattern which could generate real aggregation is not used. Aggregates generated in this study are elliptical, and by controlling the lack of interference with each other, aggregates are randomly assigned into the defined template boundaries. Then, in the next step, the specimen is meshed by choosing dimensions of elements in cubic form. Finally, the prototype is transformed into the input text file of the numerical analysis programs. The comparison between produced aggregate curve and real cure shows good agreement.}, keywords = {Concrete,Heterogeneous,Mesoscale,Aggregate and Mortar,Abacus}, title_fa = {مطالعه پارامترهای موثر در شبیه سازی میان مقیاس بتن}, abstract_fa = {طراحی و تحلیل سازه های بتنی عمدتاً با فرض اینکه بتن را می توان به عنوان یک ماده ی همگن درنظر گرفت انجام می‌شود. این درحالی است که بتن یک کامپوزیت ناهمگن، متشکل از سنگدانه ها، خمیر سیمان و حفرات هوا است. در بررسی رفتار مکانیکی بتن و تحلیل ترک، فرض همگن بودن ماده منجر به نتایج غیر واقعی می‌شود لذا با توجه به توان کامپیوترهای امروزی و اهمیت دقت نتایج، در این تحقیق از مدل میان‌مقیاس استفاده می‌شود. جهت مدلسازی رفتار غیرخطی بتن در نرم‌افزارهای اجزا محدود از مدل‌های مختلفی نظیر شکست ترد ، ترک پخشی و پلاستیک آسیب دیده بتن استفاده می‌شود. در این پژوهش سعی شده با بررسی پارامترهای ورودی سطح تسلیم مدل پلاستیک آسیب‌دیده بتن در نرم‌افزار آباکوس نتایج خروجی حاصل از مدلسازی را به نتایج واقعی نزدیک‌تر کرد. 41 تحلیل هدف‌دار برای بررسی تاثیر پنج پارامتر ورودی سطح تسلیم مدل پلاستیک آسیب دیده بتن بر روی مدل تیر شکاف دار (Natched Beam) انجام شد که نتایج حساسیت زیاد مدل نسبت به پارامتر ویسکوالاستیک در خروجی نیروها را بیشتر از سایر پارامترها نشان می‌دهد. در این پژوهش بتن شامل دو فاز سنگدانه و ملات در نرم‌افزار اجزامحدود آباکوس مدل شده است. به منظور انجام مدلسازی سنگدانه‌ها در میان‌مقیاس، نمونه‌های تصادفی به صورت کروی و بیضوی در نرم‌افزار متلب تولید شده و با کنترل عدم تداخل سنگدانه‌ها در کنار یکدیگر به صورت تصادفی درون مرزهای قالب چیده ‌شده‌اند. نتایج حاصل از مدلسازی ناهمگن با سنگدانه‌های کروی و بیضوی با مدلسازی همگن بتن مقایسه شده است. همچنن سه نمونه مکعبی بتنی در آزمایشگاه ساخته شده و با نتایج حاصل از مدلسازی دو فازه بتن مقایسه شده است. مقاومت فشاری حداکثر هر دو مدل همگن و ناهمگن برابر بوده اما شیب نمودارها در ناحیه پلاستیک متفاوت است.}, keywords_fa = {بتن,ناهمگن,میان‌ مقیاس,سنگدانه و ملات,آباکوس}, url = {https://www.jsce.ir/article_121458.html}, eprint = {https://www.jsce.ir/article_121458_f2fc0d4a280b54ad0fad7c934959c21a.pdf} }