بررسی تحلیلی رفتارغیرخطی قاب‌های بتن مسلح کامپوزیتی الیافی توانمند

نوع مقاله : علمی - پژوهشی

نویسندگان

1 گروه مهندسی عمران،واحد سمنان، دانشگاه آزاد اسلامی، سمنان، ایران

2 استادیار ، گروه مهندسی عمران، واحد سمنان، دانشگاه ازاد اسلامی ، سمنان، ایران

3 استادیار، گروه مهندسی عمران، واحد سمنان، دانشگاه آزاد اسلامی، سمنان، ایران

چکیده

جایگزینی بتن معمولی با کامپوزیت‌های سیمانی الیافی توانمند (HPFRCC) می‌تواند موجب بهبود جدی در مقاومت کششی، خمشی، برشی، مشخصه‌های تغییر شکلی، شکل پذیری، توانایی جذب انرژی و طاقت گردد. خاصیت سخت شوندگی کرنش در این کامپوزیت‌ها موجب محدود کردن ترک‌ها و جلوگیری از عریض شدن آن می‌گردد. از طرف دیگر، ظرفیت کرنش بالای این مصالح، آنها را برای استفاده در مفصل پلاستیک اتصالات تیر به ستون تحت تغییر شکل‌های غیر الاستیک بزرگ، ایده آل ساخته است. در این مقاله ضمن اعتبار سنجی رفتار خمشی تیرها و قاب‌های ساخته شده با مصالح کامپوزیت‌ سیمانی الیافی توانمند در نرم‌افزار OpenSees با مطالعات آزمایشگاهی، به منظور بررسی تاثیر این کامپوزیت در پاسخ جانبی قاب‌های خمشی بتنی، دو قاب بتنی با تعداد طبقات سه و شش طبقه که براساس ضوابط ACI 318 طراحی شده‌اند، با استفاده از نرم‌افزار OpenSees و تحلیل‌های استاتیکی غیرخطی و دینامیکی تاریخچه زمانی مورد ارزیابی قرار گرفته‌اند. قاب‌های مورد مطالعه شامل بتن معمولی به طور کامل (RC)، قاب‌های ترکیبی ساخته شده از مصالح کامپوزیت در ناحیه اتصال (RCH1)، قاب‌های ترکیبی ساخته شده از مصالح کامپوزیت در ناحیه اتصال و پای ستون‌های طبقه اول (RCH2) و قاب‌های ساخته شده از مصالح کامپوزیت به طور کامل (RH) می‌باشند.
نتایج بدست آمده از تحلیل استاتیکی غیرخطی نشان می‌دهد که مقاومت، شکل‌پذیری و تغییرمکان نهایی قاب‌های دارای مصالح کامپوزیت، افزایش قابل ملاحظه‌ای نسبت به قاب‌های بتنی معمولی داشته است. همچنین بر اساس نتایج بدست آمده از تحلیل‌های تاریخچه زمانی، استفاده از مصالح کامپوزیت سبب کاهش بیشینه جابجایی بام و بیشینه دریفت طبقات و نیز افزایش بیشینه برش پایه قاب‌ها شده است.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Evaluation of nonlinear behavior of High Performance Fiber Reinforced Cementitious Composite (HPFRCC) Frames

نویسندگان [English]

  • mohammad hossein saghafi 1
  • ali golafshar 2
  • soroush safakhah 3
1 Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
2 Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
3 Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
چکیده [English]

Replacing of conventional concrete by High Performance Fiber Reinforced Cementitious Composite (HPFRCC) could improve tensile strength, bending strength, shear strength and other capability of behaviour such as ductility, energy absorption and toughness. Strain hardening behaviour in (HPFRCC) could result in restrict of crack and prevent from crack widening. Also, because of the high strain capacity of (HPFRCC), using this material in the beam-column connection is more attention paid by researchers. After verification of numerical models for frame using OPENSEES software and comparison with experimental results, two 2D frames with 3 and 6 stories has been created to study. These frames have been designed based on ACI 318. Each frame is considered in 4 formats containing conventional concrete in all elements (RC), containing of (HPFRCC) in beam-column connection (RCH1), containing of (HPFRCC) in beam-column connection and first story column base (RCH2) and containing of (HPFRCC) in all elements. Results from nonlinear static analysis (pushover analysis) show increase of lateral strength, ductility and ultimate displacement of frames containing (HPFRCC) with respect to (RC) frames. Also, using of (HPFRCC) in frames has been decreased maximum story drift ratio, maximum roof displacement and has been increased maximum base shear and story shear in nonlinear time history analysis.

کلیدواژه‌ها [English]

  • HPFRCC
  • Tension behavior
  • Strain hardening
  • Moment RC frame
  • Nonlinear static analysis
  • Nonlinear time history analysis
[1] Naaman, A. E. (2008). High performance fiber reinforced cement composites. Singapore: World
Scientific, 91-153.
[2] Hemmati, A. Kheyroddin, A. Sharbatdar, M. Park, Y. and Abolmaali, A. (2016). Ductile behavior of
high performance fiber reinforced cementitious composite (HPFRCC) frames. Construction and
Building Materials, 115, 681-689.
[3] Zhang, R. Matsumoto, K. Hirata, T. Ishizeki,Y. Niwa, J. (2015). Application of PP-ECC in beam–
column joint connections of rigid-framed railway bridges to reduce transverse reinforcements.
Engineering Structures, 86, 146-156.
[4] Chidambaram, R.S. and P. Agarwal. (2015). Seismic behavior of hybrid fiber reinforced cementitious
composite beam–column joints. Materials & Design, 86, 771-781.
[5] Said, S.H. and H.A. Razak. (2016). Structural behavior of RC engineered cementitious composite
(ECC) exterior beam–column joints under reversed cyclic loading. Construction and Building Materials,
107, 226-234.
[6] Saghafi, MH. Shariatmadar, H. Kheyroddin, A. (2017). Experimental Evaluation of Mechanical
Properties of High Performance Fiber Reinforced Cementitious Composites. Concrete Research, 9(2),
29-42.
[7] Saghafi, MH. Shariatmadar, H. (2018). Structural behavior of RC High performance fiber reinforced
cement composites (HPFRCC) exterior beam–column joints under reversed cyclic loading. Concrete
Research, Available at URL: 12 March 2018.
[8] McKenna, F. and G.L. Fenves. (2007). The OpenSees command language manual. University of
California, Berkeley (opensees. ce. berkeley. edu).
[9] Han, T. S. Feenstra, P. H. and Billington, S. L. (2003). Simulation of highly ductile fiber-reinforced
cement-based composite components under cyclic loading. Structural Journal, 100(6), 749-757.
[10] ACI Standards. (2011)., Building Code Requirements for Structural Concrete (ACI 318-11M) and
Commentary, Michigan: American Concrete Institute, 107-196.
[11] Iranian Code of Practice for Seismic Resistant Design of Buildings. (2005)., Standard, No. 2800 .Third
Edition., Tehran: Building and Housing Research Center, 14-31.
[12] Structural Engineering Institute. (2005)., Minimum design loads for buildings and other structures,
Virginia: American Society of Civil Engineers, 5-6.
[13] Paulay, T. and M.N. Priestley. (1992). Seismic design of reinforced concrete and masonry buildings.
NewYork:Wiley