[1] Chang J. I.,Lin C C.,(2006), A study of storage tank accidents. Journal of Loss Prevention in the Process Industries 19: 51–59.
[2] Stein L. R., Gentry R. A., Hirt C.W.,(1977), Computational simulation of transient blast loading on three-dimensional structures. Comput Methods Appl Mech Eng., 11:57–74.
[3] Koko T.S., Olson M.D.,(1991), Non-linear transient response of stiffened plates to air blast loading by a super element approach. Comput Methods Appl Mech Eng., 90:737–60.
[4] Guruprasad S, Mukherjee A.(2000), Layered sacrificial claddings under blast loading Part -I analytical studies. Int J Impact Eng., 24(9):957–73.
[5] Guruprasad S., Mukherjee A.,(2000), Layered sacrificial claddings under blast loadingPart-II experimental studies. Int J Impact Eng 24(9):975–84.
[6] Goel M. D., Matsagar V. A., Gupta A.K.,(2011), Dynamic response of stiffened plates under air blast. Int J Prot Struct 2(1):139–55.
[7] Kowal-Michalska K., Kubiak T., Swiniarski J.,(2011), Influence of blast pressure modeling on the dynamic response of conical and hemispherical shells. Thin-Walled Struct 49(5):604–10 .
[8] Goel M.D., Matsagar V.A., Marburg S., Gupta A.K.,(2012), Comparative Performance of Stiffened Sandwich Foam Panels under Impulsive Loading. J Perform Constr Facil ASCE, 27(5):540–9.
[9] Tiwari R., Jain S., Chakraborty T., Matsagar V.,(2012), Dynamic response of reinforced concrete sacrificial wall under blast loading. In: Proceedings of the 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo, Brazil.
[10] Higgins W, Chakraborty T, Basu D.(2012), A high strain-rate constitutive model for sand and its application I finite-element analysis of tunnels subjected to blast. Int J Numer Anal Methods Geomech 37(15):2590–610.
[11] Bambach M.R.,(2013), Design of metal hollow section tubular columns subjected to transverse blast loads. Thin-Walled Struct 68:92–105.
[12] Mittal V., Chakraborty T., Matsagar V.,(2014), Dynamic analysis of liquid storage tank under blast using coupledEuler–Lagrange formulation. Thin-Walled Structures 84:91–111.
[13] Biswal, K., Bhattacharyya, S. and Sinha, P., (2003), “Free-vibration analysis of liquid-filled tank with baffles,” Journal of Sound and Vibration, 259, pp 177–192.
[14] Miles, J.W., (1958), “Ring damping of free surface oscillations in cylindrical tank,” Journal of Applied Mechanics, 25, pp 274–276.
[15] Silveria, M.A., Stephens, D.G. and Leonard, H.W., (1961), “An experimental investigation of damping of liquid oscillations in cylindrical tanks with various baffles,” NASA Report TN–715.
[16] Welt, F. and Modi, V.J., (1992), “Vibration damping through liquid sloshing, Part I: a nonlinear analysis,” Journal of Vibration and Acoustics, 114, pp 10–16.
[17] Maleki, A. and Ziyaifar, M., (2008), “Sloshing damping in cylindrical liquid storage tank with baffles,” Journal of Sound and Vibration, 311, pp 372–385.
[18] Gedikli, A. and Erguven, M.E., (1999), “Seismic analysis of liquid storage tank with baffle,” Journal of Sound and Vibration, 223, pp 141– 155.
[19] Cho, J.R., Lee, H.W. and Kim, K.W., (2002). “Free vibration analysis of baffled liquid-storage tanks by structural al-acoustic finite element formulation,” Journal of Sound and Vibration,
258, pp 847–866.
[20] Cho, J.R. and Lee, H.W., (2004). “Numerical study on liquid sloshing in baffled tank by nonlinear finite element method,” Computer Methods in Applied Mechanics and Engineering,
193, pp 2581–2598.
[21] Cho, J.R., Lee, H.W. and Ha, S.Y., (2005), “Finite element analysis of resonant sloshing response in 2-D baffled tank,” Journal of Sound and Vibration, 288, pp 829–845.
[22] Firouz-Abadi, R.D., Haddadpour, H., Noorian, M.A. and Ghasemi, M., (2008), “A 3D BEM model for liquid sloshing in baffled tanks,” International Journal for Numerical methods in Engineering, 76,1419–1433.
[23] Arab, M. Khaji N., (2012) “' Seismic analysis of fluid reservoir thank with annular baffel using boundary element method”, Omran Modars, 12(2),11-22.(In persian)
[24] Johnson G. R.,Cook W. H.,(1985), Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatvres and Pressures. Engineering Fracture Mechanics, 21(1), 31-48.
[25]Kinney, G.F. and K.J. Graham,(1985), Explosive shocks in air., Berlin and New York, Springer-Verlag, 282 ,1985-1999.
[26] Baker, Wilfrid E.,(1973), Explosions in the Air, University of Texas Pr., Ausint.
[27] Abaqus Analysis User Manual (6.14),2015.
[28] Guzas, E.L. and Earls,C. J.,(2010), Air blast load generation for simulating structural response. Steel Composit. Struct, 10,429-455.