اثر زوایای مختلف چرخش سیستم باربر با اعمال نامنظمی سیستم‌های غیرموازی در ساختمان بتنی با سیستم باربر دوگانه

نوع مقاله : علمی - پژوهشی

نویسندگان

1 گروه مهندسی عمران، واحد کرمانشاه، دانشگاه آزاد اسلامی، کرمانشاه، ایران

2 استادیار، گروه مهندسی عمران، واحد رامسر، دانشگاه آزاد اسلامی، رامسر، ایران

چکیده

در مقاله حاضر، تأثیر زوایای متفاوت چرخش سیستم باربر سازه با اعمال نمودن نامنظمی سیستم‌های غیرموازی در ساختمان بتنی با سیستم باربر دوگانه قاب خمشی و دیوار برشی بتنی مورد بررسی قرار گرفت. از روش تحلیل دینامیکی تاریخچه زمانی سازه مورد بررسی تحت 7 شتاب‌نگاشت زلزله استفاده شد. سازه در دو حالت مختلف بررسی شد، ابتدا سازه طراحی و بدون چرخش در سیستم باربر تحلیل و رفتار سازه بررسی شد. سپس، سیستم باربر با چرخش در زاویه 15،30 و 45 درجه برای ایجاد نامنظمی سیستم‌های غیرموازی تحلیل لرزه‌ای شد. نتایج رفتار سازه با مقایسه مقادیر برش پایه، دریفت و اثر پیچش در سازه برای زوایای مختلف چرخش هسته سیستم باربر انجام شد. نتایج تحقیق حاضر نشان داد که مقدار دریفت و برش پایه سازه در حالتی که در سازه دارای نامنظمی سیستم‌های غیرموازی است بیشتر از حالت سازه بدون نامنظمی سیستم ناموازی است. در مقایسه مقدار برش پایه برای حالت بدون زاویه و سایر حالت‌ها با افزایش زاویه چرخش سیستم باربر مقدار برش پایه افزایش می‌یابد که افزایش زاویه چرخش مقدار نیروی بیشتری را به سازه تحمیل می‌کند.مقدار برش پایه برای زاویه 30 درجه چرخش سیستم باربر سازه در راستای اصلی ساختمان از دیگر زوایا بیشتر است. وجود زاویه در سیستم باربر سازه، باعث افزایش جابجایی نسبی در سازه می‌شود. همچنین نتایج تحلیل نشان داد که عدم موازی بودن هسته مرکزی سازه، ظرفیت باربری جانبی کل سیستم را کاهش می‌دهد. به‌عنوان نتیجه گیری کلی می‌توان اظهار داشت که هرچه زاویه چرخش سیستم باربر بیشتر شود مقدار جابجایی و دریفت افزایش می‌یابد که برای زاویه 30 درجه بحرانی‌ترین حالت و برای زاویه صفر درجه بهترین عملکرد در سازه وجود دارد.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Effect of different angles of rotation of bearing system with irregular application of non-parallel systems in concrete building with dual bearing system

نویسندگان [English]

  • mehdi khoshvatan 1
  • Majid Pouraminian 2
1 Department of Civil Engineering, College of Engineering, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran
2 Department of civil engineering , Islamic Azad University, Ramsar Branch , Ramsar, Iran
چکیده [English]

In the present paper, the effect of rotation with different angles in the Structural bearing system was investigated by irregular non-parallel systems in the concrete structure with the dual design bearing system of the moment frame and the concrete shear wall. The structure was examined in two different modes, first without rotation in the bearing system and analyzed at an angle of zero degrees. Then, the bearing system was seismically analysed by rotating at angles of 15, 30, and 45 degrees to create irregularities in non-parallel systems. The results of structural behavior were performed by comparing the values of base shear, drift, and torsion effect in the structure. The results of the present study showed that the amount of drift and base shear of the structure in the state that has irregularity of non-parallel systems in the structure is more than the state of the structure without irregularity of the non-parallel system. Comparing the amount of base shear for the angels and other modes increases the amount of base shear by increasing the rotation angle of the bearing system, which increases the amount of rotation angle, imposes more force on the structure. The amount of base shear for the angle of 30 degrees of rotation of the Structural bearing system in the main direction of the building is more than other angles. The analysis results also showed that the non-parallelism of the central core of the structure reduces the lateral bearing capacity of the whole system. As a general conclusion, it can be stated that the higher the rotation angle of the bearing system, the higher the amount of displacement and drift, which is the most critical state for the 30-degree angle and the best performance in the structure for the zero degrees angle.

کلیدواژه‌ها [English]

  • Irregularity of non-parallel systems
  • seismic loads
  • base shear
  • dynamic analysis
  • dual system
  • RC building
  • Iranian Code for Practice for Seismic Resistant Design of Buildings,Standard 2800, (2014) th
  • ASCE/SEI 7-10 ; Minimum Design Loads for Buildings and Other Structures.
  • Abraham, N. M., & SD, A. K. (2019). Analysis of irregular structures under earthquake loads. Procedia Structural Integrity, 14, 806-819.
  • Manoukas, G. E. (2019). Evaluation of Pushover Methodology for Mass-Irregular in Elevation RC Buildings. Journal of Structural Engineering, 145(8), 04019082.
  • Cancellara, D. and De Angelis, F. (2019), “Dynamic assessment of base isolation systems for irregular in plan structures: Response spectrum analysis vs nonlinear analysis”, Compos. Struct., 215, 98-115. https://doi.org/10.1016/j.compstruct.2019.02.013.
  • Khazaei, M., Vahdani, R., & Kheyroddin, A. (2020). Optimal Location of Multiple Tuned Mass Dampers in Regular and Irregular Tall Steel Buildings Plan. Shock and Vibration, 2020.
  • Satheesh, A. J., Jayalekshmi, B. R., & Venkataramana, K. (2020). Effect of in-plan eccentricity on vertically stiffness irregular buildings under earthquake loading. Soil Dynamics and Earthquake Engineering, 137, 106251.
  • Ishack, S., Bhattacharya, S. P., & Maity, D. (2021). Rapid Visual Screening method for vertically irregular buildings based on Seismic Vulnerability Indicator. International Journal of Disaster Risk Reduction, 54, 102037.
  • De Stefano, M., Tanganelli, M., & Viti, S. (2020). Effect of the Mechanical Properties of Concrete on the Seismic Assessment of RC Irregular Buildings. In Seismic Behaviour and Design of Irregular and Complex Civil Structures III (pp. 201-213). Springer, Cham.
  • Khanal, B., & Chaulagain, H. (2020). Seismic elastic performance of L-shaped building frames through plan irregularities. In Structures (Vol. 27, pp. 22-36). Elsevier.
  • Dănilă, G. (2020). Procedure of Non-linear Static Analysis for Retrofitted Buildings Structures Through Seismic Isolation. In Seismic Behaviour and Design of Irregular and Complex Civil Structures III (pp. 403-411). Springer, Cham.
  • Li, Y. W., Yam, M. C., & Cao, K. (2020). Seismic collapse risk of RC frames with irregular distributed masonry infills. Structural Engineering and Mechanics, 76(3), 421-433.
  • Eivani, H., & Moghadam, A. S. (2021). Seismic response of torsional structures considering the possibility of diaphragm flexibility. Structural Engineering and Mechanics, 77(4), 463-472.
  • Chapter Six National Building Regulations, Loads on the building, Office for the Development and Promotion of National Regulations. Edition 92.