[1] Bahrebar, M. and Kabir, M. and Zirakian, T. and Hajsadeghi, M. and Lim, J. (2016). Structural Performance Assessment of Trapezoidally-Corrugated and Centrally-Perforated Steel Plate Shear Walls. Journal of Constructional Steel Research, 122, 584-594.
[2] Wang, M. and Borello, D. and Fahnestock, A. (2017). Boundary Frame Contribution in Coupled and Uncoupled Steel Plate Shear Walls. Earthquake Engineering and Structural Dynamics, 46(14), 2355-2380.
[3] Astaneh-Asl, A. (2001). Seismic Behavior and Design of Composite Shear Walls, Steel TIPS Report, Moraga: Structural Steel Educational Council.
[4] Jalali,S. and Banazadeh, M. (2016). Development of a New Deteriorating Hysteresis Model for Seismic Collapse Assessment of Thin Steel Plate Shear Walls. Thin-walled structures, 106, 244-257.
[5] Astaneh-Asl, A. and Zhao, Q. (2001). Cyclic Behavior of Traditional and an Innovative Composite Shear Wall. UCB-Steel-01/2002, Department of Civil and Env. Engineering, University of California, Berkeley.
[6] Berman, J. and Bruneau, M. Steel Plate Shear Walls are Not Plate Girders. Engineering Journal, 41(3), 95-106.
[7] Bruneau, M. and Berman, J. and Lopez-Garcia D. and Vian, D. (2005). Steel Plate Shear Wall Buildings. Design Requirements and Research. Montreal, Canada: Proceedings of 2005 North American Steel Construction Conference.
[8] Driver, R. Driver, G. Kulak, Elwi, A. Kennedy, D. (1998). FE and Simplified Models of a Steel Plate Shear Wall. ASCE Journal of Structural Engineering, 124(2), 121-130.
[9] Thorburn, L. Kulak, G. (1983). Montgomery Analysis of Steel Plate Shear Walls, Structural Engineering Report, Canada: University of Alberta.
[10] Timler, P. Kulak, G. (1983). Experimental Study of Steel Plate Shear Walls. Structural Engineering Report, 114.
[12] Farzampour, A. and Laman, J. and Mofid, M. (2015). Behavior Prediction of Corrugated Steel Plate Shear Walls with Openings. Journal of Constructional Steel Research, 114, 258-268.
[13] Emami, F. and Mofid, M. and Vafai, A. (2013). Experimental Study on Cyclic Behavior of Trapezoidally Corrugated Steel, Engineering Structures, 48, 750-762.
[14] Verma, A. and Sahoo, D. (2017). Seismic Design Procedure for Staggered Steel Plate Shear Wall. International Confrence of Earthquake Engineering and Structural Dynamics.
[15] Berman, J. and Bruneau, M. (2005). Experimental Investigation of Light-Gauge Steel Plate Shear Wall. Journal of Structural Engineering, 131(2), 259-269.
[16] Vigh, L. and Deierlein, G. and Miranda, E. and Liel, A. and Tipping, S. (2013). Seismic Performance Assessment of Steel Corrugated Shear Wall System Using Non-Linear Analysis. Journal of Constructional Steel Research, 85, 48-59
[17] Stojadinovic, B. and Tipping, S. (2007). Structural Testing of Corrugated Sheet Shear Walls. Research report. Berkeley: University of California.
[19] Ashrafi, H. and Beiranvand, P. and Pouraminian, M. and Moayeri, M. (2018). Examining the Impact of Sheet Placement and Changes in Waves Characteristics on Behavior of Wavy Steel Shear Wall,
Case Studies in Construction Materials,
https://doi.org/10.1016/j.cscm.2018.e00180.
[20] FEMA P-695. (2009). Quantification of Building System Performance and Response Parameters.
[21] Ranf, R. and Eberhard, M. and Berry, M. (2001). Damage to Bridges during the 2001 Nisqually Earthquake. University of California, Berkeley: Pacific Earthquake Engineering Research Center.
[22] HAZUS. (2003). Multi-Hazard Loss Estimation Methodology Earthquake Model, Washington, D.C: Department of Homeland Security Emergency Preparedness and Response Directorate FEMA Mitigation Division.
[23] Vamvatsikos, D. Cornell, C. (2002). Incremental Dynamic Analysis, Earthquake Engineering and Structural Dynamics, 31(3), 491-514.
[24] Computers and Structures Inc. Etabs (2015): Integrated Analysis,
Design and Drafting of Building Systems, http://www.csiamerica.com.
[25] National Building Regulations, (1392). Part 10: Design and Construction of Steel Structures. Tehran: IRI Ministry of Roads and Urban Development.
[26] National Building Regulations, (1392). Part 6: Design Loads for Buildings. Tehran: IRI Ministry of Roads and Urban Development.
[27] Iranian Code of Practice for Seismic Resistant Design of Buildings. (1392). Standard No. 2800, Tehran: Buildnig and Housing Research Center.
[28] PEER, (2008).
Open System for Earthquake Engineering Simulation (OpenSees). development platform by the Pacific Earthquake Engineering Research Center (PEER),
http://opensees.berkeley.edu.
[29] Ibarra, L., Medina, R. and Krawinkler, H. (2005). Hysteretic Models that Incorporate Strength and Stiffness Deterioration, Earthquake Engineering and Structural Dynamics, 34(12), 1489-1511
[30] ASCE 7-10. (2010). Minimum Design Loads for Building and Other Structures. ASCE/SEI 7-10, Reston, VA, USA: American Society of Civil Engineers.