انجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Modeling the Slump Flow of Self-Compacting Concrete Incorporating Metakaolin Using Soft Computing Techniquesمدلسازی جریان اسلامپ بتن خودتراکم حاوی متاکائولن با استفاده از روشهای محاسبات نرم5205521410.22065/jsce.2018.90214.1243FAعلی اشرفیاندانشجوی کارشناسی ارشد مهندسی و مدیریت ساخت موسسه آموزش عالی طبری بابل0000-0002-9134-6722محمدجواد طاهری امیریدانشجوی دکترای دانشگاه صنعتی نوشیروانی بابل، بابل، ایرانفرشیدرضا حقیقیاستادیار دانشگاه صنعتی نوشیروانی بابل0000-0002-6823-4458Journal Article20170624The sensitivity of slump flow of self-compacting concrete containing metakaolin to its ingredient materials and mixture proportions, necessitate the use of high accuracy models to guarantee both estimation and generalization features. Therefore this paper investigates the potential of multivariate adaptive regression splines (MARS) and model tree (MT) approaches in prediction of slump flow of self-compacting concrete. Total of 117 data collected from the several published literature were used in present work. The data used in proposed models are arranged in a format of eight input parameters including cement, coarse aggregate, fine aggregate, water, metakaolin, super plasticizer, binder and maximum size of aggregates (Dmax) and one output as slump flow. To evaluate the precision of the models, a comparative study has been performed in terms of RMSE, R and MAE indices. The results of training and testing datasets of the techniques are compared with experimental results and their comparisons demonstrate that the MARS and MT models have potential to predict concrete properties with great precision. Performed sensitivity analysis to assign effective parameters on slump flow was indicating fine aggregate and metakaolin is most effective variable for modeling and prediction in this type of the self-compacting concrete using MT technique in this studyمیزان حساسیت جریان اسلامپ بتن خود تراکم حاوی متاکائولن به مواد تشکیل دهنده آن و نسبتهای طرح اختلاط،لزوم استفاده از مدلهایی با دقت بالا برای تضمین ویژگیهای تخمین درست و تعمیم آن را ضرورت بخشیده است.ازاین رو، در این مقاله به بررسی قابلیت روشهای اسپلاین رگرسیونی چندمتغیره تطبیقی و مدل درختی در مدلسازی و پیشبینی جریان اسلامپ بتن خودتراکم می-پردازد.برای این منظور،تعداد 117 داده مختلف از مقالات معتبر به چاپ رسیده جمع آوری و در این پژوهش مورد استفاده قرار گرفت.اطلاعات مورد استفاده در مدل های پیشنهادی در قالب هشت ورودی شامل سیمان،درشت دانه،ریزدانه،آب،متاکائولن،فوق روان کننده،چسباننده و اندازه بزرگترین دانه شرکت کننده در طرح اختلاط (Dmax) و یک خروجی جریان اسلامپ دسته بندی شد.برای ارزیابی دقت مدلهای پیشنهادی، مطالعه ای مقایسه ای در قالب شاخص های آماری RMSE، R ، MAE انجام شد.نتایج بدست آمده از مجموعه داده ها در مراحل آموزش و آزمون مدل های پیشنهادی و مقایسه آنها با نتایج آزمایشگاهی پتانسیل بالای دو روش مارس و مدل درخت را در پیشبینی خواص بتن با دقت نشان می دهد.آنالیز حساسیت انجام شده برای مشخص کردن تاثیرگزار ترین پارامتر در جریان اسلامپ بتن خودتراکم نشان داد ریزدانه و متاکائولن موثرترین متغیرها درمدلسازی و پیشبینی جریان اسلامپ این نوع بتن خودتراکم در قالب روش پیشنهادی مدل درخت در این پژوهش بوده است.https://www.jsce.ir/article_55214_bd73e06a9a442858c4875b5b37a0e248.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Match Compliance of Conventional Design Codes with Instructions for Seismic Rehabilitation of Buildings in Performance Evaluation of Steel Moment Framesبررسی تطبیقی آیین نامه های متداول طراحی با دستورالعمل های بهسازی لرزه ای در ارزیابی عملکرد قاب های خمشی فولادی21385585010.22065/jsce.2018.96056.1300FAمحمدامیر نجفقلی پورحقیقیاستادیار، دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایرانمحمدعلی هادیان فرددانشیار، دانشکده عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایرانشهریار ملک جمشیدیدانشجوی کارشناسی ارشد زلزله، دانشگاه صنعتی شیرازسیدمهدی دهقاندانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایران0000-0002-4286-323XJournal Article20170825Today, instructions for seismic rehabilitation of existing buildings are widely used for seismic performance evaluation of existing buildings. Moreover, nonlinear structural analysis methods are permitted for seismic design of new buildings in recent versions of seismic design codes in some countries, such as Iran. Therefore, match compliance of conventional design codes with instructions for seismic rehabilitation of existing buildings is of great importance. On the other hand, four different analysis methods are available in seismic rehabilitation instructions that compatibility of these analysis techniques can be evaluated. In this regard, seismic performance of three buildings with steel moment frames as lateral load resisting system with 4, 8 and 12 stories that were designed previously according to conventional seismic design codes with two levels of ductility (Intermediate and Special) were evaluated using seismic vulnerability assessment instruction in Iran (Code No. 360) by means of four analysis procedures. Analysis results indicate that conventional seismic design codes are more conservative than Code No. 360. In other words, design of steel moment frames with conventional design codes leads to stronger beams and columns. This phenomenon can be due to controlling lateral interstory drift and weak beam-strong column criterion in moment frames that control final design of these structures.با توجه به گسترش استفاده از دستورالعمل های بهسازی لرزه ای برای ارزیابی سطح عملکرد ساختمان های موجود در سراسر جهان و همچنین اشاره به استفاده از تحلیل های غیرخطی در طراحی سازه های جدید در ویرایش های جدید آیین نامه های طراحی لرزه ای برخی از کشورها، بحث تطبیق این مدارک با یکدیگر از اهمیت ویژه ای برخوردار است. با توجه به معرفی چهار روش مختلف تحلیل در دستورالعمل بهسازی لرزه ای ساختمان های موجود (نشریه 360)، سازگاری این روش ها نیز در تعیین سطح عملکرد ساختمان های موجود قابل بررسی است. از این رو در این تحقیق در راستای پاسخ به دو سوال فوق در ساختمان های با سیستم باربر قاب خمشی فولادی، عملکرد لرزه ای سه ساختمان فولادی با پلان مشابه شکل پذیری ویژه و متوسط که با استفاده از آیین نامه های رایج طراحی سازه های فولادی (مبحث دهم مقررات ملی ساختمان) طراحی شده بودند، با استفاده از چهار روش تحلیل پیشنهادی در نشریه 360 مورد ارزیابی قرار گرفت. نتایج حاصل از این تحقیق نشان می دهد که به طور کلی نشریه 360 نسبت به آیین نامه های مرسوم طراحی سازه های فولادی مانند مبحث دهم مقررات ملی ساختمان، برای سازه ساختمان های جدید منجر به مقاطع سبک تری می شود. به عبارت دیگر آیین نامه های طراحی لرزه ای نسبت به آیین نامه های بهسازی دارای ضوابط سختگیرانه تری می باشند. این امر می تواند به دلیل کنترل معیار تغییرشکل نسبی جانبی طبقات در آیین نامه های طراحی ساختمان های جدید یا دیگر کنترل های مضاعف لازم باشد که در ساختمان های فولادی با قاب خمشی کنترل کننده طرح هستند.https://www.jsce.ir/article_55850_9fcbf579e49f98283a563262b8d5837a.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823The Effect of strong motion duration on pounding of steel moment frame buildingتاثیر مدت زمان حرکت قوی زمین بر ضربه بین دو سازه قاب خمشی فولادی39565585110.22065/jsce.2018.88947.1229FAجواد واثقی امیریاستاد، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران0000-0002-0267-4709سید ابوالفضل ناصریدانشجوی کارشناسی ارشد، دانشگاه صنعتی نوشیروانی بابل، ایرانJournal Article20170610Usually during moderate and strong earthquakes, if the space between the adjacent structures is not enough, structural pounding will occur which is due to the out-of-phase vibration of the structures regarding the differences in dynamic properties of the structures. Different factors contribute in the state of structural pounding, and researchers have already studied several factors including the space between two structures, the type of pounding, force transmission means, reducing the pounding damage and etc. Record is one of the factors which can affect the structural pounding, and one of the most crucial parameters of record is strong ground motion duration which its analysis is very important in the quality of structural response.<br />In this study, effect of strong ground motion duration on the adjacent structural pounding is investigated. To do so, steel moment resisting frames in 5, 8 and 12 floors are designed which are paired together in three forms of 5-8, 5-12, and 8-12 models for nonlinear time history analysis. In this analysis, 15 records that include three intervals for strong ground motion duration are being implemented (0 to 10 seconds, 10 to 30 seconds, 30 seconds and more). Besides, in order to obtain the pounding force between structures, linear elastic elements are used in floor levels.<br />Results show that in structures in which the space equal to 1% of their heights are not considered, with increasing the strong ground motion duration, maximum structural pounding will also increase with a smooth gradient, and for the structures with space equal to 0.5% of their heights, this increase rate is more compared to the structures with no space.معمولا در زلزلههای متوسط و شدید اگر فاصله میان سازههای مجاور کافی نباشد و خواص دینامیکی سازهها با هم متفاوت باشد، به دلیل ارتعاش غیر همفاز سازهها پدید ضربه رخ میدهد. عوامل مختلفی در چگونگی ضربه بین سازهها موثر میباشد و محققان در گذشته عوامل گوناگونی همچون فاصله میان دو سازه، نوع ضربه، نحوه انتقال نیرو بین دو سازه، کاهش خسارت ناشی از ضربه و... را بررسی کردهاند. نوع شتاب نگاشت نیز از عواملی است که میتواند روی میزان ضربه بین دو سازه تاثیرگذار باشد و یکی از پارامترهای مهم شتاب نگاشت، مدت زمان حرکت قوی زمین است که بررسی تاثیر آن بر چگونگی پاسخ سازهها از اهمیت فراوان برخوردار است.<br />در این تحقیق به بررسی اثر مدت زمان حرکت قوی زمین بر ضربه بین دو سازه مجاور پرداخته میشود. به این منظور سازههای قاب خمشی فولادی 5، 8 و 12 طبقهای طراحی گردید که در سه حالت (مدلهای 5-8، 5-12 و 8-12طبقه در کنار هم) مورد تحلیل تاریخچه زمانی غیر خطی قرار گرفتهاند. در این تحلیل ها از 15 شتاب نگاشت که شامل سه طیف از مدت زمان حرکت قوی زمین متفاوت است، (0 تا 10 ثانیه، 10 تا 30 ثانیه و 30 ثانیه و بالاتر) بهره گرفته شده است. همچنین به منظور دریافت نیروی ضربه در بین سازهها در تراز کف طبقات از المان الاستیک خطی استفاده شده است. نتایج نشان میدهد که در سازههایی که فاصله یک درصد ارتفاع در آنها رعایت نشده است، با افزایش مدت زمان حرکت قوی زمین، بیشترین نیروی ضربه بین دو سازه نیز با شیب ملایمی افزایش می یابد و این نرخ رشد در سازههایی که دارای فاصله نیم درصد ارتفاع بودهاند، بیشتر از سازههایی که بدون فاصله از هم بوده اند، مشاهده شده است.https://www.jsce.ir/article_55851_1e6a48d02374ac57932948695ffe238e.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823The effect of beam-column connections and soil on the seismic behavior of intermediate steel moment-resisting framesاثر مدلسازی اتصالات تیر – ستون و خاک بر رفتار لرزهای قابهای خمشی فولادی متوسط57745697310.22065/jsce.2018.95059.1286FAحامد رحمن شکرگزاراستادیار،دانشگاه محقق اردبیلی، اردبیل، ایران0000-0003-1521-7934مریم زارع آقبلاغفارغ التحصیل مهندسی عمران-سازه از دانشگاه محقق اردبیلیاحمد علی خدایی اردبیلیدانشجوی دکتری مهندسی عمران – ژئوتکنیک، دانشگاه صنعتی خواجه نصیرالدین طوسی، تهران، ایرانJournal Article20170810Soil-structure interaction expresses the difference of structural responses between the actual and theoretical rigid based conditions, and depends on the stiffness, mass and damping of soil and structure systems. Nowadays, moment-resisting frame is one the most applicated structural systems. Ductility of these frames is due to the flexural yielding of beams, columns and the shear yielding of panel zone of columns. The influence of modeling beam-column connections and soil-foundation-structure interaction on the seismic responses of 10-story intermediate steel moment-resisting frames that located on the soil type IV with various shear wave velocities (150 and 80 m/s) and soil type II (with shear wave velocities 56 m/s) is studied in this paper. Prequalified welded flange plate connections (WFP) are used in these buildings. For this purpose, several 2D finite element models are developed using OpenSees software by assuming three conditions such as models with considering soil and beam-column connections effects, models with considering soil and without connections, models with fixed based and without considering connections. The maximum responses of the studied frames are calculated and compared with nonlinear time-history dynamic analyses. The numerical results show that in the models located on soil type IV, considered connections, SFSI, or just soil, the maximum lateral displacement and maximum inter-story drift are more, compare to models without connections and with fixed based conditions. In the models rested on soil type II, some of these parameters are reduced. The maximum base shear of structures is reduced in the mentioned models.اندرکنش خاک – سازه اختلاف موجود در پاسخ های سازه را درشرایط واقعی و تئوری با فرض تکیه گاه صلب بیان می کند و به مشخصاتی همچون سختی، جرم و میرایی خاک و سازه بستگی دارد. ساختمانهای دارای قاب خمشی از جمله سیستمهای سازه ای هستند که امروزه از فراوانی نسبتا بالایی برخوردار هستند. در این نوع قابها شکل پذیری توسط عواملی همچون تسلیم خمشی تیرها، ستونها و تسلیم برشی چشمه اتصال ستون حاصل می گردد. در این مقاله، تاثیر مدلسازی اتصالات تیر – ستون و اندرکنش خاک – فونداسیون - سازه بر پاسخ لرزه ای ساختمانهای 10 طبقه با سیستم سازه ای قاب خمشی فولادی متوسط واقع بر خاک نوع IV دارای سرعتهای موج برشی 150 و 80 متر بر ثانیه و خاک نوع II با سرعت موج برشی 560 متر بر ثانیه ارزیابی شده است. اتصالات بکار رفته برای این ساختمانها از نوع اتصالات از پیش تایید شده ی جوشی به کمک ورقهای روسری و زیرسری (WFP) هستند. به منظور بررسی عملکرد این ساختمانها، مدلهای اجزای محدود دو بعدی با فرض لحاظ اثر خاک و اتصالات، لحاظ اثر خاک و عدم لحاظ اثر اتصالات، تکیه گاه صلب و بدون لحاظ اثر اتصالات توسط نرم افزار OpenSees ساخته شده اند. این مدلها تحت تحلیلهای دینامیکی تاریخچه ی زمانی غیرخطی قرار گرفته و حداکثر پاسخ آنها با یکدیگر مقایسه گردیده است. نتایج بدست آمده نشان می دهد که در مدلهای واقع بر خاک نوع IV، لحاظ اثر خاک و اتصالات و یا فقط اثر خاک، منجر به افزایش حداکثر تغییرمکان جانبی و حداکثر تغییرمکان نسبی بین طبقه ای نسبت به مدلهای بدون لحاظ آنها و در مدلهای واقع بر خاک نوع II منجر به کاهش برخی از این پاسخها می گردد. در کلیه ی مدلها، لحاظ این دو عامل باعث کاهش حداکثر برش پایه می شود.https://www.jsce.ir/article_56973_91f1225658e334d32760483a4b56f09b.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Parametric study on dynamic behavior of liquid storage tanks subjected to pulse-like excitationsمطالعه پارامتریک رفتار دینامیکی مخازن ذخیره مایعات تحت تحریکات پالسگونه75865697410.22065/jsce.2018.95816.1297FAسامان باقریگروه سازه، دانشکده مهندسی عمران، دانشگاه تبریز، تبریز، ایران0000-0001-6059-5577حسین حیاتیرادگروه سازه، دانشکده مهندسی عمران، دانشگاه تبریز، تبریز، ایرانJournal Article20170819Liquid storage tanks are widely used to store different types of liquids such as petroleum products. Any failure of these structures may cause serious consequences. Near-fault ground motions which may have severe velocity pulses have a destructive potential on these facilities and can be represented by analytical pulse-like functions. In this paper, a parametric study is carried out to investigate the seismic behavior of liquid storage tanks under pulse-like excitations. For this purpose, the liquid storage tanks are modeled using equivalent mechanical models and then dynamic analyses of the models are done using pulse-like excitations. The selected analytical pulse-like excitation is based on the modified Gabor Wavelet transform with four main characteristics: amplitude of the signal, period of the signal, shape (phase) of the signal, and the number of pulses. The effect of each pulse parameter as well as the effect of tank aspect ratio on the various response parameters is investigated. The obtained results indicate that the sloshing motion of the liquid near the free surface is affected more by equivalent pulses with long periods while the base shear and overturning moment are affected more by equivalent pulses with short periods. It is also seen that by increasing the number of pulses, the response parameters increase considerably when the pulse period is near the natural period of the convective mode. However, changing the phase of input signals in order to produce symmetric or anti-symmetric pulses has not any noticeable effect on the obtained results.مخازن ذخیره سیالات به طور گسترده برای ذخیره مایعات مختلف همانند فرآوردههای نفتی در صنایع استفاده میشوند و صدمه دیدن آنها پیامدهای خطرناکی را به همراه خواهد داشت. زلزلههای حوزه نزدیک گسل با دارا بودن پالسهای شدید سرعت، پتانسیل آسیب زدن به چنین سازههایی را دارند. این نوع تحریکات زمین میتوانند به صورت توابع تحلیلی پالسگونه ارائه شوند. در این تحقیق رفتار لرزهای مخازن ذخیره سیالات تحت چنین تحریکات پالسگونه بصورت پارامتریک بررسی میشود. برای این منظور ابتدا مخازن با مدلهای مکانیکی معادل شبیهسازی شده و سپس آنالیز دینامیکی آنها تحت این نوع تحریکات انجام میشود. مدل تحلیلی پالس انتخاب شده بر پایه توابع موجک بوده که دارای چهار ویژگی دامنه، پریود، شکل و تعداد پالس است. تاثیر هر یک از این متغیرها در انواع پاسخهای دینامیکی و نیز تاثیر نسبت ابعادی مخزن ارزیابی میشود. نتایج حاصله بیانگر این است که پالسهایی با پریود بلند با توجه به بالا بودن زمان تناوب مود نوسانی، جابجایی قائم سطح آزاد سیال و پالسهایی با پریود کوتاه به لحاظ پایین بودن زمان تناوب ضربانی، برشپایه و ممان واژگونی را تحت تاثیر و تشدید قرار میدهند. همچنین با افزایش تعداد پالس، پاسخها در حوالی پریود پالس نزدیک به زمان تناوب نوسانی افزایش چشمگیری مییابند. این در حالی است که شکل پالس از نظر متقارن یا پاد متقارن بودن تاثیر محسوسی بر نتایج حاصل ندارد.https://www.jsce.ir/article_56974_7802a93488281a1c08d6e5a08e034c4b.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Effect of Earthquake Frequency Content on Dynamic Response of Concrete Rectangular Tanks Using Coupled Finite Element Method and Smoothed Particle Hydrodynamicsاثر محتوای فرکانسی زلزله بر پاسخ دینامیکی مخازن بتنی مستطیلی با استفاده از روش ترکیبی المان محدود و هیدرودینامیک ذرات هموار871025697510.22065/jsce.2018.100667.1348FAمحمد صافیاستادیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران0000-0002-7094-1813سپهر رسول پورکارشناس ارشد مهندسی زلزله، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایرانعباس مهدویاندانشیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایرانJournal Article20171010Concrete ground tanks are widely used in storing water, sewage, oil, toxic chemicals and other liquids. Depending on their type of use, they are usually in the category of very important structures of lifelines; Therefore, the dynamic analysis of liquid storage tanks is one of the most important issues in earthquake engineering. On the other hand, the seismic behavior of the storage tanks and its interaction with liquid is very important. In this study, the water medium is modeled using smoothed particle hydrodynamics method and tank’s structure modeled by finite element method. The smooth particle hydrodynamics, which is a meshfree method, has many advantages over other traditional grid-based methods. For verification purposes, the modeling accuracy was compared with the available experimental and numerical results, the reasons and parameters that were effective on selecting the records were expressed, and then the time history analysis was performed on the modeled storage tank including records with different frequency content. The parameters of sloshing height, acceleration at the top of the tank’s wall, base shear, force per unit width and wall displacement were obtained for comparison. Finally, the effect of frequency content was studied considering the effect of water-structure interaction on the tank. The results showed that a record with low frequency content results higher sloshing height, while a record with moderate frequency content will cause larger responses on the tank’s structure despite of its lower sloshing height. The study also proved that the dominant frequencies of sloshing increases with decreasing frequency content of earthquake.مخازن زمینی بتنی، کاربرد گستردهای در ذخیره آب، فاضلاب، نفت، مواد شیمیاییِ سمی و سایر مایعات دارند. بنابراین با توجه به نوع کاربری آنها، به طور معمول در رده سازههای با اهمیت خیلی زیاد شریانهای حیاتی قرار دارند؛ در نتیجه تحلیل دینامیکی مخازن ذخیره مایعات از موضوعات مهم در مهندسی زلزله است. از طرفی بررسی رفتار لرزهای مخازن و اندرکنش مایع درون آن اهمیت بسزایی دارد. در این مطالعه محیط آب به روش هیدرودینامیک ذرات هموار و سازه مخزن به روش اجزای محدود مدلسازی شدند. روش هیدرودینامیک ذرات هموار که یک روش بدون مش است دارای مزایای فروانی نسبت به دیگر روشهای سنتیِ بر پایه شبکهبندی میباشد. به منظور صحت سنجی، درستی مدلسازی با نتایج آزمایشگاهی و عددی موجود مقایسه شد، دلایل و پارامترهای موثر در انتخاب رکوردها بیان، و سپس مخزن مدلسازی شده تحت تاثیر رکورد زلزلههای با محتوای فرکانسی مختلف به صورت تاریخچه زمانی تحلیل گردید. پارامترهای ارتفاع تلاطم، شتاب در بالای دیواره مخزن، برش پایه، نیرو در عرض واحد و جابهجایی دیواره برای مقایسه بدست آورده شدند و در انتها تاثیر محتوای فرکانسی با در نظر گرفتن تاثیر اندرکنش آب-سازه بر مخزن بررسی گردید. نتایج نشان داد که رکورد با محتوای فرکانسی کمتر منجر به تلاطم با ارتفاع بیشتر میشود؛ در حالی که رکورد با محتوای فرکانسی متوسط علیرغم ارتفاع تلاطم کمتر باعث به وجود آمدن پاسخهای بزرگتر سازه مخزن میگردد. همچنین مشاهده شد که فرکانسهای غالب تلاطم با کاهش محتوای فرکانسی زلزله، افزایش پیدا میکند.https://www.jsce.ir/article_56975_d963ad874469b49b4a5b3c50f8202d8f.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Effect of Nano Clay on the Durability of Reinforced Concrete Beams under Service Loads and Chloride Attackتاثیر نانورس بر دوام تیرهای بتن مسلح تحت بارهای بهرهبرداری و تهاجم کلراید1031185697610.22065/jsce.2018.98869.1337FAطالب رودیانگروه مهندسی عمران، دانشگاه یاسوجحمید رحمانیگروه مهندسی عمران، دانشگاه زنجانشهاب الدین حاتمیگروه مهندسی عمران، دانشگاه یاسوجJournal Article20170925Durability of reinforced concrete (RC) structures has been increased using different additives under corrosive environments in the recent years. In the present study, 0, 0.5, 1 and 1.5 percentage of nano clay particles were substituted as cement. Therefore, 24 RC beams divided in three groups after 28 days of curing. The first group consists of 8 beams which were tested after 28 days of moist curing. The second and the third groups consist of 8 beams in each group, which were tested after 6 months exposure in chloride solution and wetting and drying cycles, where the third group beams were additionally under service loads. Also, compressive strength and water absorption of the mixtures were evaluated at different ages. Results showed that the addition of nano-clay particles considerably reduces the compressive strength of concretes which consequently decreases the flexural capacity of the beams. In addition, nano-clay particles reduce the half-hour water absorption and increase 24-hour water absorption. Also, results showed that the wetting and drying cycles of chloride solution for 6 months reduces the flexural capacity of the beams, but service loads reduces the negative effect of the exposure. Also, the beams containing nano-clay particles showed better performance under chloride attack.دوام بتنهای مسلح در محیطهای خورنده در سالهای اخیر با استفاده از افزودنیهای مختلف افزایش یافته است. در این تحقیق نیز نانو ذرات رس به میزان ۰/۵، ۱ و ۱/۵ درصد وزنی سیمان، جایگزین سیمان در طرح اختلاط شاهد شده اند. بر همین اساس 24 عدد تیر بتن مسلح پس از 28 روز عمل آوری در آب به سه گروه تقسیم بندی شدند که در هر گروه میزان جایگزینی نانو ذرات رس متغیر میباشد. گروه اول شامل 8 عدد تیر که پس از 28 روز عمل آوری در آب تحت آزمایش خمشی قرار گرفتند. گروه دوم و سوم نیز هر کدام شامل 8 عدد تیر بودند که پس از ۲۸ روز عمل آوری در آب به مدت 6 ماه در محلول کلراید و چرخه تر و خشک قرارگرفته و سپس تحت آزمایش خمشی قرار گرفتند، با این تفاوت که تیرهای گروه سوم در مدت 6 ماه قرارگیری در محلول خورنده تحت بارگذاری نیز قرار داشتند. همچنین مقاومت فشاری و جذب آب کلیه طرح اختلاطها در سنین مختلف اندازه گیری گردید. نتایج نشان داد که افزودن نانورس به بتن باعث کاهش قابل توجه مقاومت فشاری شده و همین امر باعث میگردد که ظرفیت خمشی تیرها نیز کاهش یابد. علاوه بر این افزودن نانورس به بتن باعث کاهش جذب آب نیم ساعته و افزایش جذب آب 24 ساعته میشود. ضمناً نتایج نشان داد که قرارگیری تیرها در محلول کلراید و سیکلهای تر و خشک باعث کاهش ظرفیت خمشی تیرها میگردد، اما بارگذاری تیرها تاثیر مخرب محلول کلراید را کاهش میدهد. همچنین تیرهای حاوی نانورس در برابر تهاجم کلرایدها به مراتب عملکرد بهتری داشتند.https://www.jsce.ir/article_56976_b983cb6d66745b8c08f10a84e539ea0a.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Investigation of the Seismic Behavior of Framed Tube Buildings Considering Soil Structure Interactionبررسی رفتار لرزه ای ساختمانهای بلند لوله ای با درنظرگرفتن اثرات اندرکنش خاک و سازه1191405740710.22065/jsce.2018.95818.1298FAفرزاد اعتدادی علی آبادیکارشناس ارشد سازهمحمد مهدی معمارپوراستادیار، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینیJournal Article20170831In recent years, the framed tube system has been known as the most efficient structural system for the high-rise buildings. The entire lateral resistance in the framed tube structures is provided by closely spaced exterior columns and deep spandrel beams. A framed tube building suffers from the shear lag effects, which cause a nonlinear distribution of axial stresses along the face of the building so that the axial stress in the corner columns increases while it decreases in the interior columns. Shear lag depends on the perimeter columns size and spacing and flexibility of the spandrel beams. In this study, the influence of soil structure interaction (SSI) on shear lag phenomenon and deformation of reinforced concrete framed tube structures have been investigated and the results of linear and nonlinear analyses have been compared. In addition, P-Delta effects on some of the nonlinear static analyses have been considered and the sequence of plastic hinges formation has been investigated. The influence of SSI, the formation of plastic hinges and P-Delta effects have been determined by analyzing a 50-story reinforced concrete framed tube structure under seismic loading. The results show that SSI decreases shear lag and increases deformations of the structure. It also indicates that the formation of plastic hinges is so effective in deformation of the top stories and distribution of axial stresses in the top half of the building, and how P-Delta effects are important in deformation and strength of the framed tube structures.در ساختمانهای بلند با سیستم لولهای ستونها و تیرهای اطراف سازه وظیفه تحمل بارهای جانبی را به عهده دارند. در این سیستم سازهای در حالت ایدهال کل سازه به صورت یک تیر طره رفتار کرده و ستونهای سازه در دو وجه مقابل هم بهطوریکنواخت به کشش و فشار باربری مینمایند ولی با توجه به تغییرشکل ایجادشده در تیرهای محیطی سازه، یکنواختی تنش در ستونهای محیطی دچار خلل شده و پدیده لنگیبرشی ایجاد میگردد. میزان اثر پدیده لنگیبرشی به عواملی مانند انعطافپذیری تیرهای جانبی، فاصله و ابعاد ستونهای جانبی، ارتفاع سازه و دیگر مشخصات سازه بستگی دارد. تعیین اثر پدیده لنگیبرشی بر توزیع نیروی جانبی بین المانهای سازهای اهمیت زیادی دارد. در این تحقیق میزان تاثیر اندرکنشخاکوسازه بر پدیده لنگیبرشی، تغییرشکلها، نحوه توزیع نیروهای جانبی بین ستونهای محیطی ساختمان و روند تشکیل مفصلهای پلاستیک در سازههای لولهای بتنآرمه بررسی میشود. همچنین مقایسهای بین نتایج تحلیل خطی و غیرخطی صورت گرفته و اثرات تشکیل مفصلهای پلاستیک با در نظر گرفتن تاثیرات ثانویه P-Delta بر تغییرشکلها و رفتار کلی سازه بررسی شدهاست. در این تحقیق با مدل کردن یک ساختمان بتنی 50 طبقه با سیستم لولهای و تحلیل رفتار لرزهای سازه تحت اعمال بارهای جانبی ناشی از زلزله در دو حالت با و بدون درنظرگرفتن اثر اندرکنشخاکوسازه مورد بررسی قرار گرفته است. نتایج نشان میدهد که بهطورکلی وجود اندرکنشخاکوسازه باعث کاهش پدیده لنگیبرشی و افزایش تغییرشکل میشود همچنین تشکیل مفصلهای پلاستیک اثر زیادی بر رفتارکلی و تغییر شکل سازه لولهای خواهد داشت.https://www.jsce.ir/article_57407_8081aede063150973ba3f876faa0f507.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823.Assessing Effect of Temperature Rise on the Concrete Containing Recycled Metal Spring and Its Comparison with Ordinary Fibresبررسی تأثیر افزایش دما بر روی بتن های حاوی فنر فلزی بازیافتی و مقایسه با الیاف های رایج1411565740810.22065/jsce.2018.93911.1278FAمجید قلهکیدانشیار، دانشگاه سمنان، سمنان، ایرانقاسم پاچیدهدانشجوی دکترای سازه دانشگاه سمنانJournal Article20170730Fibre or recycled material used in the concrete improves resistance, ductility, and durability of concrete. Concrete has fire-resistant properties but the most worrying thing about reinforced concrete structures during the fire is related to rebars. Therefore, there is a suggestion about use of alternative materials such as recycled metal spring in order to reduce above mentioned risks. In this paper, we conduct laboratory study to assess performance of concrete containing recycled metal spring while using volumetric amounts of 0.2, 0.4 and 0.6% at temperatures of 25, 100, 250, 500, 700 and 900 degrees Celsius. Furthermore, compressive strength and tensile strength of the most optimal combination of spring in the concrete are compared with concrete containing steel fibre and polypropylene. The results show that spring used in the concrete improves compressive strength and tensile strength. But the more the spring is used in the concrete, the more the resistance is reduced. Therefore, if the spring with 0.2 volume percent that is considered as the most optimal combination percentage is increased by 3 times, it increases compressive strength and tensile strength. Furthermore, the optimal compressive strength of spring in different temperatures is about 2 – 3 times of steel fibre and polypropylene and its tensile strength is close to strength of steel fibre. Fibre used in concrete reduces width of the cracks created after the test by 3 times.استفاده از الیاف یا مواد بازیافتی در بتن، باعث بهبود مقاومت، شکلپذیری و دوام بتن میشود. بتن دارای خواص ضد حریق بوده لکن بیشترین نگرانی از سازههای بتنآرمه در زمان آتشسوزی مربوط به میلگردها است. لذا یکی از پیشنهادات به منظور کاهش خطرات فوق، استفاده از مصالح جایگزین نظیر فنر فلزی بازیافتی می باشد. در این مقاله به مطالعهی آزمایشگاهی عملکرد بتنهای حاوی فنر فلزی بازیافتی با بکار بردن درصدهای حجمی 2/0، 4/0 و 6/0 تحت دماهای 25، 100، 250، 500، 700 و 900 درجهی سانتیگراد پرداخته شد. پس از سرد شدن نمونهها، مقاومت فشاری و کششی بهینهترین درصد اختلاط فنر در بتن، با بتن حاوی الیاف فولادی و پلیپروپیلن مقایسه شد. نتایج حاکی از آن است که استفاده از مقدار 2/0 درصد فنر در بتن با باعث بهبود مقاومت فشاری و کششی بتن تا حدود 3 برابر نمونهی شاهد شده، اما هرچه میزان استفاده از آن در بتن افزایش یابد از مقاومت آن نیز کاسته میشود. همچنین مقاومت فشاری بتن با درصد بهینهی فنر در دماهای مختلف حدود 2 الی 3 برابر بتن حاوی الیاف فولادی و پلیپروپیلن بوده و مقاومت کششی آن نیز تا حدودی نزدیک به مقاومت الیاف فولادی میباشد. همچنین وجود فنر در بتن، عرض ترکهای بوجود آمده پس از انجام تست مقاومت کششی را تا 3 برابر کاهش میدهد.https://www.jsce.ir/article_57408_a1ef074385afd0cec71e06baae6de2b7.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Determining of Load Bearing Capacity of Rectangular Concrete Columns Reinforced with Longitudinal Spirals Using FEM and ANN Methodsتعیین ظرفیت باربری محوری ستون های بتنی مسلح شده با آرماتورهای طولی مارپیچ با استفاده از روش اجزای محدود و شبکه عصبی مصنوعی1571765740910.22065/jsce.2018.101469.1351FAمجتبی لبیب زادهگروه عمران - دانشکده ی مهندسی - دانشگاه شهید چمران اهوازمحمد دادکدانشجوی کارشناسی ارشد سازه، گروه عمران دانشکده مهندسی، دانشگاه شهید چمران اهوازJournal Article20171022Concrete rectangular columns reinforced with longitudinal spirals are new types of RC columns which their behavior has been investigated by researchers in recent years. These researches are limited to some experimental studies which investigate the effect of different configurations and layouts of the spirals within the cross-section of these columns on the bearing capacity and ductility. In this study, for the first time, the behavior of these columns has been simulated using numerical approaches. Finite Element (FE) models of these columns were developed using ABAQUS/CAE/Explicit v.2016 and then verified against available valid experiments in literature. Subsequently, by performing several sensitivity analyses using verified EF model, the effective parameters on bearing capacity of this kind of columns were detected. By changing the value of these parameters in rational ranges, a comprehensive parametric analysis was done after that using FE models in order to produce necessary input data for training an Artificial Neural Network (ANN). This parametric study was performed because of the lake of sufficient available experimental data. The developed ANN was verified against some experimental data. Finally, in addition to ANN, a regression analysis was performed to obtain a polynomial function can predict the bearing capacity of these type of columns. Obtained results demonstrate that the combination of FE and ANN is an effective method to predict the load bearing capacity of RC columns with longitudinal spiral reinforcements and have a good agreement with the results of regression analysis.ستونهای بتنی با آرماتورهای طولی مارپیچ ایدهی جدیدی در طراحی هستند که در سالهای اخیر مورد توجه محققین قرار گرفتهاند. این ستونها قابلیت باربری و شکلپذیری زیادی در مقایسه با ستونهای مسلح شده با آرماتورهای طولی مرسوم دارند. کلیه مطالعات در این زمینه به چند کار ازمایشگاهی بر روی پیکربندیهای مختلف آرماتور مارپیچ محدود شدهاند. در این مقاله برای نخستین بار، ستونهای مسلح شده به آرماتور مارپیچ بوسیلهی روش اجزای محدود شبیهسازی شده است و سپس مدل اجزای محدود با استفاده از نتایج ازمایشگاهی، صحت سنجی شده است. به کمک نمونه صحت سنجی شده میتوان امکان مطالعه پارامتری گسترده روی رفتار باربری این گونه ستونها که انجام آن در شرایط ازمایشگاهی بسیار هزینه بر و وقت گیر میباشد را فراهم ساخت. تاکنون برای این تیپ از ستونها روش عددی برای تخمین ظرفیت باربری ارائه نشده است. در این مطالعه، همچنین برای بار نخست تلاش شده است تا ظرفیت باربری ستونهای یاد شده با استفاده از شبکه عصبی مصنوعی بدست آید. به دلیل کمبود امکانات ازمایشگاهی، از نمونهی صحت سنجی شده اجزای محدود برای تعیین پارامترهای تاثیر گذار بر ظرفیت باربری و همچنین تولید دادههای مورد نیاز به عنوان ورودی برای شبکه عصبی استفاده شد. پس از طراحی شبکه، نتایج حاصل از شبکه عصبی با چند نمونه ازمایشگاهی که در فرایند اموزش از انها استفاده نشده بود، راستی ازمایی گردید. در پایان علاوه بر روش شبکه عصبی، از روش تحلیلی رگرسیون چندگانه که با برازش از میان نتایج حاصل از مدلسازی عددی رابطهای بین متغیر-های ورودی و ظرفیت باربری نهایی ارائه میدهد، استفاده شد. نتایج حاصل از دو روش با دقت قابل قبولی بر این گواهی میدهند که این روشها میتوانند ظرفیت باربری این تیپ از ستونها را با دقت قابل قبولی تخمین بزنند که میتواند در آینده به ارائه روابط کاربردی جهت طراحی و استفاده در صنعت ساختمان منجر شود.https://www.jsce.ir/article_57409_54b6103e8372250c3569efb0c463cd15.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Behaviour Verification of Gas Transfer Buried Steel Pipelines by Propagation of Seismic Waves in Soil Typesبررسی رفتار لوله های فولادی مدفون توزیع گاز در انواع خاک ها در اثر انتشار امواج لرزه ای1771905792810.22065/jsce.2018.99586.1338FAجمال احمدیاستادیار دانشکده مهندسی، دانشگاه زنجانعلی گوهررخیدانشکده مهندسی دانشگاه زنجانعلی نانکلیدانش آموخته کارشناسی ارشد مهندسی عمران/ سازه دانشگاه زنجانرضا راستی اردکانیدانشکده مهندسی عمران، دانشگاه شهید بهشتیJournal Article20170927The most important parameter for determining the level of performance and breakdown of buried pipes in the case of earthquake is the maximum value of strain. Vital arteries code, while studying the maximum value of strain, have addressed the seismic behavior of buried pipelines. Static methods don’t have the ability to consider the transient strain effect in their results, so it is necessary to consider another method in determining maximum strain. From the suggested methods to determine the maximum strain in buried pipes during earthquake is nonlinear dynamic analysis of pipes and the soil around it. In this study, using Abaqus software, we have presented a method to calculate the maximum strain of buried steel pipes for gas transfer in soil according to the parameters including earthquake energy like Arias intensity and Housner spectral intensity and using accelerograms. Analyses performed according to dynamic method is nonlinear and modeling has been done for three different lengths of gas transfer buried steel pipes in soil, with the internal pressure using different accelerograms for types of soil in Iran 2800 code. Then, in order to present a united relation to show the relationship between maximum strain of steel pipes and parameters including earthquake energy, in order to apply the considered relation for buried pipes with different lengths and different soils, we have used T/L parameter and the values of a and b (coefficients of fitted diagrams) in each section is expressed according to this parameterدر مطالعات انجام شده، اثرات زلزله بر روی خطوط لوله مدفون به دو دسته اثر انتشار امواج (آثار دینامیکی) و اثر تغییر مکان پایدار زمین (آثار استاتیکی) تقسیم بندی میشوند. به عبارتی خطرات لرزه ای به دو دسته خطرات ناشی از انتشار امواج و تغییرمکان دائمی زمین (PGD) تقسیم می شوند. خطر تغییر مکان پایدار زمین (PGD) براساس کرنش ایجاد شده در لوله به علت لغزش، نشست زمین یا روانگرایی ناشی از گسترش جانبی مشخص میشود و خرابیهای ناشی از آن معمولاً در ناحیه محدودی از شکست زمین اما به شکل شدیدی اتفاق میافتد. مهمترین پارامتر برای تعیین سطح عملکرد و میزان خرابی خطوط لوله مدفون در هنگام وقوع زلزله، مقدار حداکثر کرنش میباشد. آئیننامه های شریانهای حیاتی نیز با بررسی مقدار حداکثر کرنش، به بررسی رفتار لرزه ای خطوط لوله مدفون پرداختهاند. در این مطالعه با استفاده از نرم افزار Abaqus روشی برای محاسبه حداکثر کرنش به وجود آمده در لوله های فولادی مدفون انتقال گاز در خاک بر حسب پارامترهای محتوی انرژی زلزله مانند شدت آریاس و شدت طیفی هاوزنر که با استفاده از شتاب نگاشت ها بدست می آید ارائه شده است. سپس به منظور ارائه یک رابطه واحد برای نمایش ارتباط بین حداکثر کرنش لوله های فولادی و پارامترهای محتوی انرژی زلزله (SI, AI, PGV*te/PGD) از پارامتر T/L ( نسبت پریود امواج برشی خاک به طول لوله) استفاده گردید و مقادیر a و b (ضرایب نمودارهای برازش داده شده) در هر بخش بر اساس این پارامتر بیان شده استhttps://www.jsce.ir/article_57928_cfb9b61d65b8f9ff84ca1a6f69b1c6da.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Evaluating the Effect of Strength and Geometry Parameters of Angle on Behavior of Post-Tensioned Steel Connection with Top and Bottom Anglesبررسی تاثیر مقاومت و مشخصات نبشی بر رفتار اتصال فولادی پس کشیده با نبشی های فوقانی و تحتانی1912085741110.22065/jsce.2018.97060.1311FAمحسن َعزیزیموسسه آموزش عالی جهاددانشگاه خوزستان، اهواز، خوزستاننوید سیاه پلواستادیار ، موسسه آموزش عالی جهاد دانشگاهی خوزستان، ایرانJournal Article20170831Due to the 1994 Northridge earthquake, many of welded steel moment resisting frames (WSMRF) collapsed in the connection area of the beam to a column. The damage in WSMRF, which was contrary to the expectations of the engineers, changed the attitude of the WSMRF. Thus, engineers decided to introduce more ductile and detailed connections. Post-Tensioned Connection (PTC) is one of the new connections proposed by them. PTC includes high strength, pre-tensioned cables to create self-centering properties and energy dissipation to control plastic deformation. In this study, the numerical modeling of the PTC was performed using the ABAQUS finite element software. In addition to verify the model accuracy with the experimental results, 6 types of the connection were modeled and the effect of some parameters including the use of high strength steel (HSS) angle, the application of angle with unequal leg lenght, the use of stiffness for angle and the effect of the ratio of length to thickness on connection behavior under cyclic loading are investigated. In the range of models of this paper, the results show that the use of HSS for an angle causes a slight increase in flexural strength and capacity in lateral load bearing. Also, results demonstrated that the use of an angle with an unequal leg length does not affect the behavior of the connection. The use of stiffness for angle increases bending strength, capacity, energy dissipation, initial and inelastic stiffness and durability. Also, the reduction of the gage length to the thickness (g/t) from 4 to 3.6 would increase the energy dissipation of the connection, so that the energy dissipation in the connection with a lower g/t ratio is 17% higher.در اثر زلزلهی سال 1994 نورتریج تعداد زیادی از ساختمانهای فولادی جوشی با سیستم قاب خمشی، در ناحیهی اتصالات تیر به ستون دچار شکست شدند. این خرابی در اتصالات قابهای خمشی که بر خلاف انتظار مهندسان بود، باعث شد تا نوع نگاه به اتصالات این قابها دچار تغییر شود. به همین دلیل مهندسان بر آن شدند تا اتصالاتی با شکلپذیری بیشتر و جزئیاتی جدید معرفی کنند. اتصال پس کشیده یکی از اتصالات نوین است که توسط محققان پیشنهاد شده است. اتصالات پس کشیده، شامل کابلهای پس کشیده با مقاومت بالا برای ایجاد خاصیت خود مرکزی و اتلاف کنندههای انرژی برای کنترل تغییرشکلهای پلاستیک هستند. در این مطالعه مدلسازی عددی اتصال پس کشیده با استفاده از نرم افزار اجزای محدود آباکوس انجام گرفته و ضمن کنترل صحت مدلسازی با نتایج آزمایشگاهی، 6 نمونه از اتصال مدلسازی شده و تاثیر برخی پارامترها شامل استفاده از فولاد پرمقاومت برای نبشی، استفاده از نبشی با ساق نامساوی، استفاده از سخت کننده برای نبشی و اثر نسبت طول آزمون به ضخامت نبشی (g/t ) بر رفتار اتصال تحت بارگذاری چرخه ای مورد بررسی قرار می گیرد. در محدوده مدلهای این مقاله نتایج نشان می دهد که استفاده از فولاد با مقاومت تسلیم بالاتر برای نبشی باعث افزایش جزئی ظرفیت خمشی و توان اتصال در تحمل بار جانبی می شود. همچنین نتایج نشان داد که استفاده از نبشی با طول ساق نامساوی تاثیری بر رفتار اتصال ندارد. استفاده از سخت کننده برای نبشی، باعث افزایش ظرفیت خمشی، توان اتصال در تحمل بار جانبی، اتلاف انرژی، سختی اولیه و سختی ماندگار اتصال می شود. همچنین کاهش نسبت طول آزمون به ضخامت نبشی (g/t ) از 4 به 6/3، باعث افزایش اتلاف انرژی اتصال می شود، بگونه ای که اتلاف انرژی در اتصال با نسبت (g/t ) کمتر، 17% بیشتر است.https://www.jsce.ir/article_57411_ece876b8e7872a61c77dda5c4787afce.pdfانجمن مهندسی سازه ایرانمهندسی سازه و ساخت2476-39776شماره 220190823Evaluation of Slit Steel Damper & Reduced Beam Section Connections Under Cyclic Loadingبررسی عملکرد میراگر شکافدار و تیر با سطح مقطع کاهش یافته تحت بارگذاری چرخهای2092225436610.22065/jsce.2017.98867.1329FAمسعود ذبیحی سامانیاستادیار، گروه مهندسی عمران، دانشکده فنی مهندسی، واحد پرند، دانشگاه آزاد اسلامی، پرند، ایران0000-0002-1330-165Xمحمدحسین عابدابراهیمیگروه مهندسی عمران، دانشکده فنی و مهندسی، واحد تهران غرب، دانشگاه آزاد اسلامی، تهران، ایرانپیام طریقیکارشناس ارشد مهندسی عمران سازه، دانشگاه سمنانJournal Article20170924One of the drawbacks of the mentioned connections after Northridge and kobe earthquakes was the destruction of beam after earthquake, difficulty and non economical displacement of the beam. Several studies are being carried out on a variety of materials and systems that dissipate the seismic loading effects in order to improve the seismic performance of steel frames. By placing dampers in the beam column connections, damage to the beams and columns, which are very difficult to replace after an earthquake, was prevented during an earthquake. During the design process of dampers, in order to concentrate the earthquake loads on the damper, it was manufactured intentionally with a lower strength than the beams and columns. Through this, beams and columns are protected from damage by utilizing the energy absorption capacity of the damper. Slit damper is a plate or a standard section with a number of slits in the web. The damper is attached to the beam by bolting a plate on the damper under the flange of the beam. In this study first compared slit steel damper connection and connection with the reduced beam section (RBS) under cyclic loading. Some suggestions were provided for improvement of the performance of slit steel damper connection and for making its behavior similar to that of reduced beam section connection and transforming it to a connection which can be used in the special bending frame; and these suggestions include increase in the thickness and number of stripe and decrease in the height. the results and simulations showed that increasing in the number of strips, the increase in thickness and decrease in the height of the SSD damper affects significantly the performance of SSD connection.یکی از نقدهای مطرح شده به اتصالات پیشنهادی بعد از زلزله های نورثریچ و کوبه، تخریب تیر بعد از وقوع زلزله، دشواری و مقرون به صرفه نبودن تعویض آن پس از زلزله میباشد. به همین منظور ایده استفاده از اتصالات همراه با میراگر شکافدار (SSD) که موجب استهلاک انرژی و تشکیل مفصل پلاستیک در مکانی غیر از المانهای اصلی سازهای میگردد، مطرح شد. در این مطالعه ابتدا مقایسهای بین اتصال SSD و اتصال تیر با سطح مقطع کاهش یافته (RBS) تحت بارگذاری چرخهای انجام شده است. در ادامه پیشنهاداتی به منظور بهبود عملکرد اتصال SSD با قابلیت استفاده در قابهای خمشی ویژه مطرح گردیده است، که این پیشنهادات شامل افزایش ضخامت و تعداد نوارها و همچنین کاهش ارتفاع میراگر بوده است. نتایج مطالعات نشان داد که اتصال SSD از لحاظ عملکردی تفاوت زیادی با اتصال RBS نداشته است و مطابق با ضوابط لرزهای اتصالات از پیش تایید شده، امکان استفاده از این اتصال در قابهای خمشی ویژه وجود دارد با این تفاوت که نیاز به تعویض آن پس از زلزله نمی باشد. همچنین نتایج نشان داد که افزایش ضخامت و کاهش ارتفاع میراگر بر خلاف افزایش تعداد نوارهای آن، بر روی عملکرد اتصال SSD تاثیر بیشتری داشته است. نتایج نشان می دهید اتصال SSD علاوه بر سهولت تعویض می تواند عملکردی مشابه اتصالات RBS را از خود بروز دهد.https://www.jsce.ir/article_54366_17835f5f48f0780ac218238a0efcc64e.pdf