ORIGINAL_ARTICLE
مدلسازی جریان اسلامپ بتن خودتراکم حاوی متاکائولن با استفاده از روشهای محاسبات نرم
میزان حساسیت جریان اسلامپ بتن خود تراکم حاوی متاکائولن به مواد تشکیل دهنده آن و نسبتهای طرح اختلاط،لزوم استفاده از مدلهایی با دقت بالا برای تضمین ویژگیهای تخمین درست و تعمیم آن را ضرورت بخشیده است.ازاین رو، در این مقاله به بررسی قابلیت روشهای اسپلاین رگرسیونی چندمتغیره تطبیقی و مدل درختی در مدلسازی و پیشبینی جریان اسلامپ بتن خودتراکم می-پردازد.برای این منظور،تعداد 117 داده مختلف از مقالات معتبر به چاپ رسیده جمع آوری و در این پژوهش مورد استفاده قرار گرفت.اطلاعات مورد استفاده در مدل های پیشنهادی در قالب هشت ورودی شامل سیمان،درشت دانه،ریزدانه،آب،متاکائولن،فوق روان کننده،چسباننده و اندازه بزرگترین دانه شرکت کننده در طرح اختلاط (Dmax) و یک خروجی جریان اسلامپ دسته بندی شد.برای ارزیابی دقت مدلهای پیشنهادی، مطالعه ای مقایسه ای در قالب شاخص های آماری RMSE، R ، MAE انجام شد.نتایج بدست آمده از مجموعه داده ها در مراحل آموزش و آزمون مدل های پیشنهادی و مقایسه آنها با نتایج آزمایشگاهی پتانسیل بالای دو روش مارس و مدل درخت را در پیشبینی خواص بتن با دقت نشان می دهد.آنالیز حساسیت انجام شده برای مشخص کردن تاثیرگزار ترین پارامتر در جریان اسلامپ بتن خودتراکم نشان داد ریزدانه و متاکائولن موثرترین متغیرها درمدلسازی و پیشبینی جریان اسلامپ این نوع بتن خودتراکم در قالب روش پیشنهادی مدل درخت در این پژوهش بوده است.
https://www.jsce.ir/article_55214_bd73e06a9a442858c4875b5b37a0e248.pdf
2019-08-23
5
20
10.22065/jsce.2018.90214.1243
بتن خودتراکم
جریان اسلامپ
متاکائولن
مارس
مدل درخت
مدلسازی
علی
اشرفیان
ali_ashrafian@yahoo.com
1
دانشجوی کارشناسی ارشد مهندسی و مدیریت ساخت موسسه آموزش عالی طبری بابل
AUTHOR
محمدجواد
طاهری امیری
jvd.taheri@gmail.com
2
دانشجوی دکترای دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
AUTHOR
فرشیدرضا
حقیقی
haghighi@nit.ac.ir
3
استادیار دانشگاه صنعتی نوشیروانی بابل
LEAD_AUTHOR
[1] Wada, A., Huang, Y.H., Yamada, T., Ono, Y., Sugiyama, S., Baba, M. and Miyabara, T. (1997). Actual Size & Real Time Speed Tests for Hysteretic Steel Damper. In: Proceedings of Stessa, Vol. (97), pp. 778-785.
1
[2] Lee, M.-H., Oh, S.-H., Huh, C., Oh, Y.-S., Yoon, M.-H., Moon, T.-S. (2002). Ultimate Energy Absorption Capacity of Steel Plate Slit Dampers Subjected to Shear Force. Steel Structures, Vol. (2), pp. 71-79.
2
[3] Chan, R. and Albermani, F. (2008). Experimental Study of Steel Slit Damper for Passive Energy Dissipation. Engineering Structures, Vol. (30), pp. 1058–1066.
3
[4] Oh, S.-H., Kim, Y.-J. and Ryu, H.-S. (2008). Seismic Performance of Steel Structures with Slit Dampers. Engineering Structures, Vol. (31), pp. 1997-2008.
4
[5] Ghabraie, K., Chan, R., Huang, X. and Xie, Y.M. (2010). Shape Optimization of Metallic Yielding Devices for Passive Mitigation of Seismic Energy. Engineering Structures, Vol. (32), pp. 2258-2267.
5
[6] Khosnodian, F. and Kiani, M. (2010). Evaluation of SSD Connections in Special Steel Moment Frame. First National Conference on Structural-Earthquake-Geotechnics, Mazandaran, Babolsar.
6
[7] Karavasilis, T.L., Kerawala, S. and Hale, E. (2012). Hysteretic Model for Steel Energy Dissipation Devices & Evaluation of a Minimal-Damage Seismic Design Approach for Steel Buildings. Journal of Constructional Steel Research, Vol. (70), pp. 358–367.
7
[8] Tohidi Moghadam, V. and Saeed Monir, H. (2012). Evaluation of CSSD Connections under Seismic Loading. Second National Conference on Crisis Management, Tehran, Iran.
8
[9] Tohidi Moghadam, V. and Saeed Monir, H. (2012). Usage of CSSD in Steel Moment Frame. Third National Conference on Earthquake and Structures, Kerman, Iran.
9
[10] Zahraei, S. M. and Amin dehghan, A. (2012). Evaluation of New metal damper for Improving Seismic Behavier of Concentrated brace. Second National Conference on Crisis Management, Tehran, Iran.
10
[11] Zahraei, S. M. and Amin dehghan, A. (2012). Evaluation of Ductility and Absorb Energy of New Damper for Usage in Steel Braced Frame. Second National Conference on Crisis Management, Tehran, Iran.
11
[12] Koken, A. and Koroglu, M.A. (2012). Waste Rubber Damper Using on Steel Beam to Column Connection. International Journal of Arts & Sciences, Vol. (5), pp. 217–222.
12
[13] Moshtagh, A., Sheydaei, M.R. and Tohidi Moghadam, V. (2012). Usage of CSSD on the failure behavior of spatial double-layer Smooth and evaluation of progressive failure in them. Third National Conference on Earthquake and Structures, Kerman, Iran.
13
[14] Moshtagh, A., Tohidi Moghadam, V. and Saeed Monir, H. (2012). Study of progressive fracture on reinforced frames with duct slit damper. The 2nd National Conference on Earthquake-Geotechnic and Structures, Mazandaran.
14
[15] Saffari, H., Hedayat, A.A. and Poorsadeghi Nejad, M. (2013). Post-Northridge Connections With Slit Dampers to Enhance Strength & Ductility. Journal of Constructional Steel Research, Vol. (80), pp. 138–152.
15
صاحبامتیاز انجمن مهندسی سازه ایران
16
222 نشریه علمی – پژوهشی مهندسی سازه و ساخت، دوره 6، شماره 2، سال 9318 ، صفحه 201 تا 222
17
[16] Koken, A. and Koroglu. M.A. (2015). Experimental Study on Beam-to-Column Connections of Steel Frame Structures with Steel Slit Dampers. American Society of Civil Engineers, Vol. (29), pp. 1-11.
18
[17] Hedayat, A.A. (2015). Prediction of the Force Displacement Capacity Boundary of an Unbuckled Steel Slit Damper. Journal of Constructional Steel Research, Vol. (114), pp. 30-50.
19
[18] Farahi Shahri, S. and Mosavi, S.R. (2016). Development of slit dampers at the junction to the column by creating oval gaps. Modares Civil Engineering Jurnal, Vol. (16), pp. 93-104.
20
[19] Tagawa, H., Yamanishi, T., Takaki, A. and Chan, R. (2016). Cyclic Behavior of Seesaw Energy Dissipation System with Steel Slit Dampers. Journal of Constructional Steel Research, Vol. (117), pp. 24–34.
21
[20] Hwan Lee, Ch., Kim, J., Hyun Kim, D., Ryu, J., K. and Ju, Y. (2016). Numerical & Experimental Analysis of Combined Behavior of Sheartype Friction Damper & Non-uniform Strip Damper for Multi-level Seismic Protection. Engineering Structures, Vol. (114), pp. 75–92.
22
[21] Zabihi-Samani M and Amini F. (2015) A cuckoo search controller for seismic control of a benchmark tall building, Journal of Vibroengineering, Vol. 17(3), pp. 1382-1400.
23
[22] Mirghaderi, S.R., Torabian, Sh. and Imanpour, A. (2010). Seismic Performance of the Accordion-Web RBS Connection. J Constr Steel Res, Vol. (66), pp. 277-288.
24
[23] Aghajanian S, Baghi H, Amini and Zabihi-Samani Masoud. (2014). Optimal control of steel structures by improved particle swarm, International Journal of Steel Structure, , Vol. (14), pp. 223-30.
25
[25] Saleh, A., Mirghaderi, S.R. and Zahrai, S.M. (2016). Cyclic Testing of Tubular Web RBS Connections in Deep Beam. Jornal of Constructional Steel Research, Vol. (117), pp. 2214-226.
26
[26] Amini F, Zabihi-Samani M. (2014). A wavelet-based adaptive pole assignment method for structural control, Computre Aided Civil and Infrastructure Engineering, Vol. (29(6)), pp. 464-77.
27
[27] Moon, K.H., Kim, B.Ch., Hwang, S.H. and Han, S.W. (2016). Seismic Performance Evaluation of the Steel Moment Frames with Reduced Beam Section Connections with Bolted Web. The 5th International Symposium on Steel Structures, Seoul, Korea.
28
[28] Ghanooni-Bagha M, Shayanfar MA, Reza-Zadeh O, Zabihi-Samani M. (2017). The effect of materials on the reliability of reinforced concrete beams in normal and intense corrosions. Eksploatacja i Niezawodnosc – Maintenance and Reliability. Vol. (19(3)), pp. 393-402.
29
[29] Chih Chen, Ch. and Chou Lin, Ch. (2013). Seismic Performance of Steel Beam-to-Column Moment Connections with Tapered Beam Flanges. J Struct Eng, Vol. (48), pp. 588-601.
30
[30] Kulkani, S.A. and Vesmawala, G. (2014). Study of Steel Moment Connection with & Without Reduced Beam Section. Case Studies in Structural Engineering, Vol. (1), pp. 26-31.
31
[31] Zabihi-Samani Masoud and Ghanooni-Bagha Mohammad. (2017). A fuzzy logic controller for optimal structural control using MR dampers and particle swarm optimization. Journal of Vibroengineering, Vol. (19(3)), pp. 1901-1914.
32
[32] Saleh, A., Zahrai, S.M. and Mirghaderi, S.R. (2016) Exprimental Study on Innovative Tubular Web RBS Connections in Steel MRFs With Typical Shallow Beams. Structural Engineering & Mechanics, Vol. (57), pp. 785-808.
33
[33] ABAQUS (2010). Version9.10, Dassault Systemes, USA.
34
[34] FEMA 350 (2000). Recommended Seismic Design Criteria for New Steel Moment Frame Buildings. SAC Joint Venture.
35
[35] AISC 358 (2016). Prequalified Connections for Special & Intermediate Steel Moment Frams for Seismic Applications. Chicago.
36
[36] Code 10 (2012). Design and Construction Provisions for Structural Steel Buildings. Tehran: Toseh Iran.
37
[28] Madandoust, Rahmat, and S. Yasin Mousavi. (2012)"Fresh and hardened properties of self-compacting concrete containing metakaolin." Construction and Building Materials 35: 752-760.
38
[29] Abouhussien, Ahmed A., and Assem AA Hassan. (2015)"Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis." Construction and Building Materials 76: 297-306.
39
[30] Dinakar, P., and S. N. Manu. (2014)"Concrete mix design for high strength self-compacting concrete using metakaolin." Materials & Design 60: 661-668.
40
[31] Hassan, Assem AA, Mohamed Lachemi, and Khandaker MA Hossain. (2012)"Effect of metakaolin and silica fume on the durability of self-consolidating concrete." Cement and concrete composites 34.6: 801-807.
41
[32] Güneyisi, Erhan, Mehmet Gesoglu, and Erdoğan Özbay. (2009)"Evaluating and forecasting the initial and final setting times of self-compacting concretes containing mineral admixtures by neural network." Materials and structures 42.4: 469-484.
42
[33] Hassan, Assem AA, Mohamed K. Ismail, and Justin Mayo. (2015) "Mechanical properties of self-consolidating concrete containing lightweight recycled aggregate in different mixture compositions." Journal of Building Engineering 4: 113-126.
43
[34] Kavitha, O. R., et al. "Fresh, micro-and macrolevel studies of metakaolin blended self-compacting concrete. (2015)" Applied Clay Science 114: 370-374.
44
[35] Kannan, V., and K. Ganesan. "Effect of Tricalcium Aluminate on Durability Properties of Self-Compacting Concrete Incorporating Rice Husk Ash and Metakaolin. (2015)" Journal of Materials in Civil Engineering 28.1: 04015063.
45
[36] Abouhussien, Ahmed A., Assem AA Hassan, and Mohamed K. Ismail. (2015)"Properties of semi-lightweight self-consolidating concrete containing lightweight slag aggregate." Construction and Building Materials 75: 63-73.
46
[37] Ahmed, Syed. "Fresh and Mechanical Properties of Self-Consolodating Concrete Incorporationg Silica Fume and Metakaolin. (2007)" Project Report of Batcholer of Civil Engineering, NDE University.
47
[38] Najafzadeh, M., Balf, M. R., & Rashedi, E. (2016). "Prediction of maximum scour depth around piers with debris accumulation using EPR, MT, and GEP models". Journal of Hydroinformatics, jh2016212.
48
ORIGINAL_ARTICLE
بررسی تطبیقی آیین نامه های متداول طراحی با دستورالعمل های بهسازی لرزه ای در ارزیابی عملکرد قاب های خمشی فولادی
با توجه به گسترش استفاده از دستورالعمل های بهسازی لرزه ای برای ارزیابی سطح عملکرد ساختمان های موجود در سراسر جهان و همچنین اشاره به استفاده از تحلیل های غیرخطی در طراحی سازه های جدید در ویرایش های جدید آیین نامه های طراحی لرزه ای برخی از کشورها، بحث تطبیق این مدارک با یکدیگر از اهمیت ویژه ای برخوردار است. با توجه به معرفی چهار روش مختلف تحلیل در دستورالعمل بهسازی لرزه ای ساختمان های موجود (نشریه 360)، سازگاری این روش ها نیز در تعیین سطح عملکرد ساختمان های موجود قابل بررسی است. از این رو در این تحقیق در راستای پاسخ به دو سوال فوق در ساختمان های با سیستم باربر قاب خمشی فولادی، عملکرد لرزه ای سه ساختمان فولادی با پلان مشابه شکل پذیری ویژه و متوسط که با استفاده از آیین نامه های رایج طراحی سازه های فولادی (مبحث دهم مقررات ملی ساختمان) طراحی شده بودند، با استفاده از چهار روش تحلیل پیشنهادی در نشریه 360 مورد ارزیابی قرار گرفت. نتایج حاصل از این تحقیق نشان می دهد که به طور کلی نشریه 360 نسبت به آیین نامه های مرسوم طراحی سازه های فولادی مانند مبحث دهم مقررات ملی ساختمان، برای سازه ساختمان های جدید منجر به مقاطع سبک تری می شود. به عبارت دیگر آیین نامه های طراحی لرزه ای نسبت به آیین نامه های بهسازی دارای ضوابط سختگیرانه تری می باشند. این امر می تواند به دلیل کنترل معیار تغییرشکل نسبی جانبی طبقات در آیین نامه های طراحی ساختمان های جدید یا دیگر کنترل های مضاعف لازم باشد که در ساختمان های فولادی با قاب خمشی کنترل کننده طرح هستند.
https://www.jsce.ir/article_55850_9fcbf579e49f98283a563262b8d5837a.pdf
2019-08-23
21
38
10.22065/jsce.2018.96056.1300
قاب خمشی فولادی
عملکرد لرزه ای
طراحی لرزه ای
تحلیل غیرخطی
تحلیل خطی
محمدامیر
نجفقلی پورحقیقی
najafgholipour@sutech.ac.ir
1
استادیار، دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایران
LEAD_AUTHOR
محمدعلی
هادیان فرد
hadianfard@sutech.ac.ir
2
دانشیار، دانشکده عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایران
AUTHOR
شهریار
ملک جمشیدی
shahriar.c80@gmail.com
3
دانشجوی کارشناسی ارشد زلزله، دانشگاه صنعتی شیراز
AUTHOR
سیدمهدی
دهقان
smdehghan@sutech.ac.ir
4
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایران
AUTHOR
[1] Federal Emergency Management Agency (FEMA), (2000). Prestandard and commentary for the seismic rehabilitation of buildings (FEMA 356). Washington, D.C.
1
[2] American Society of Civil Engineers (ASCE), (2013). Seismic Evalautation and Retrofit of Existing Buildings (ASCE 41). Reston, Virginia.
2
[3] New Zealand Society of Earthquake Engineering (NZSEE), (2017). The Seismic Assessment of Existing Buildings.
3
[4] Vice Presidency for Strategic Planning and Supervision, (2014). Instruction for Seismic Rehabilitation of Existing Buildings (Code No. 360). Tehran, Iran.
4
[5] Road, Housing and Urban Developenment Research Center (BHRC), (2015). Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard 2800). Tehran, Iran.
5
[6] Galındez, N. and Thomson, P. (2007). Performance of steel moment-frame buildings designed according to the Colombian code NSR-98. Engineering Structures, 29, 2274-2281.
6
[7] Malekpour, S., Seyyedi, P., Dashti, F. and Asghari, F. (2011). Seismic Performance Evaluation of Steel Moment-Resisting Frames Using Iranian, European and Japanese Seismic Codes. Procedia Engineering, 14, 3331-3337.
7
[8] Behnamfar, F. and Dastan Mirak, H. (2015). A procedure for harmonizing design based on Standard 2800 and seismic evaluation of document 360. In: 7th International conference on seismology and earthquake engineering (SEE7). Tehran.
8
[9] Speicher, M.S. and Harris III, J.L. (2015). Assessment of First Generation Performance-Based Seismic Design Methods for New Steel Buildings, Vol1: Special moment frames, National Institute of Standards and Technology (NIST), Tehran, Iran.
9
[10] Speicher, M.S. and Harris III, J.L. (2016). Collapse Prevention seismic performance assessment of new eccentrically braced frames using ASCE 41. Engineering Structures, 117, 344-357.
10
[11] Speicher, M.S. and Harris III, J.L. (2016). Collapse Prevention seismic performance assessment of new concentrically braced frames using ASCE 41. Engineering Structures, 126, 652-666.
11
[12] Ghanbari, A.R. and Jalali, A.R. (2012). Seismic evaluation of low-rise, mid-rise and tall steel buildings based on performance based design. In: The First Regional Conference of Civil Engineering with Sustainable Development Approach. Sari, Iran.
12
[13] Eskandari, M. and Sherafat, M.H. (2014). Seismic performance evaluation of steel moment frames using different analysis methods. In: Fifth National Conference of Steel and Structures. Tehran, Iran.
13
[14] Barkhordari, M.A. and Ghaffari, F. (2014). Performance evaluatation of moment resisting and concentrically braced steel frames. In: 15th Conference of Civil Engineering Students. Oroumie, Iran.
14
[15] Mosleh, A., Rodrigues, H., Varum, H., Costa, A. and Arêde, A. (2016). Seismic behavior of RC building structures designed according to current codes. Structures, 7, 1-13.
15
[16] Nemati, H. and Jalali, A.R. (2016). Performance evaluation RC structures designed based on Iranian National Building Code. In: Second International Conference on Civil Engineering, Architechture and Urban Economy Development. Shiraz, Iran.
16
[17] Nemati, H. and Jalali, A.R. (2016). Seismic evaluation of low-rise, mid-rise and tall RC buildings based on performance based design. In: Third Conference of Engineering Scince Development. Shiraz, Iran.
17
[18] Özhendekci, D. and Özhendekci, N. (2012). Seismic performance of steel special moment resisting frames with different span arrangements. Journal of Constructional Steel Research, 72, 51-60.
18
[19] Flores, F., Charney, F. and Lopez-Garcia, D. (2016). The influence of gravity column continuity on the seismic performance of special steel moment frame structures. Journal of Constructional Steel Research, 118, 217-230.
19
[20] Ferraioli, M., Lavino, A. and Mandara, A. (2014). Behaviour Factor of Code-Designed Steel Moment-Resisting Frames. International Journal of Steel Structures, 14(2), 243-254.
20
[21] Pirizadeh, M. and Shakib, H. (2013). Probabilistic seismic performance evaluation of non-geometric vertically irregular steel buildings. Journal of Constructional Steel Research, 82, 88-98.
21
[22] Celarec, D. and Dolšek, M. (2013). The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings. Engineering Structures, 52, 340-354.
22
[23] Asgarian, B. and Ordoubadi, B. (2016). Effects of structural uncertainties on seismic performance of steel moment resisting frames. Journal of Constructional Steel Research, 120, 132-142.
23
[24] Road, Housing and Urban Developenment Research Center (BHRC), (2013). National Building Code: No. 10: Design and construction of steel buildings. Tehran, Iran.
24
[25] Road, Housing and Urban Developenment Research Center (BHRC), (2013). National Building Code: No. 6: Applied Loads on buildings. Tehran, Iran.
25
ORIGINAL_ARTICLE
تاثیر مدت زمان حرکت قوی زمین بر ضربه بین دو سازه قاب خمشی فولادی
معمولا در زلزلههای متوسط و شدید اگر فاصله میان سازههای مجاور کافی نباشد و خواص دینامیکی سازهها با هم متفاوت باشد، به دلیل ارتعاش غیر همفاز سازهها پدید ضربه رخ میدهد. عوامل مختلفی در چگونگی ضربه بین سازهها موثر میباشد و محققان در گذشته عوامل گوناگونی همچون فاصله میان دو سازه، نوع ضربه، نحوه انتقال نیرو بین دو سازه، کاهش خسارت ناشی از ضربه و... را بررسی کردهاند. نوع شتاب نگاشت نیز از عواملی است که میتواند روی میزان ضربه بین دو سازه تاثیرگذار باشد و یکی از پارامترهای مهم شتاب نگاشت، مدت زمان حرکت قوی زمین است که بررسی تاثیر آن بر چگونگی پاسخ سازهها از اهمیت فراوان برخوردار است.در این تحقیق به بررسی اثر مدت زمان حرکت قوی زمین بر ضربه بین دو سازه مجاور پرداخته میشود. به این منظور سازههای قاب خمشی فولادی 5، 8 و 12 طبقهای طراحی گردید که در سه حالت (مدلهای 5-8، 5-12 و 8-12طبقه در کنار هم) مورد تحلیل تاریخچه زمانی غیر خطی قرار گرفتهاند. در این تحلیل ها از 15 شتاب نگاشت که شامل سه طیف از مدت زمان حرکت قوی زمین متفاوت است، (0 تا 10 ثانیه، 10 تا 30 ثانیه و 30 ثانیه و بالاتر) بهره گرفته شده است. همچنین به منظور دریافت نیروی ضربه در بین سازهها در تراز کف طبقات از المان الاستیک خطی استفاده شده است. نتایج نشان میدهد که در سازههایی که فاصله یک درصد ارتفاع در آنها رعایت نشده است، با افزایش مدت زمان حرکت قوی زمین، بیشترین نیروی ضربه بین دو سازه نیز با شیب ملایمی افزایش می یابد و این نرخ رشد در سازههایی که دارای فاصله نیم درصد ارتفاع بودهاند، بیشتر از سازههایی که بدون فاصله از هم بوده اند، مشاهده شده است.
https://www.jsce.ir/article_55851_1e6a48d02374ac57932948695ffe238e.pdf
2019-08-23
39
56
10.22065/jsce.2018.88947.1229
ضربه سازه ای
مدت زمان حرکت قوی زمین
المان الاستیک خطی
تحلیل تاریخچه زمانی غیر خطی
قاب خمشی فولادی
جواد
واثقی امیری
vaseghi@nit.ac.ir
1
استاد، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
LEAD_AUTHOR
سید ابوالفضل
ناصری
s.abolfazlnaseri@gmail.com
2
دانشجوی کارشناسی ارشد، دانشگاه صنعتی نوشیروانی بابل، ایران
AUTHOR
[1] Chai Y, Fajfar P.2000. A procedure for estimating input energy spectra for seismic design. Journal of Earthquake Engineering;4(04):539-61.
1
[2] Shome N, Cornell CA, Bazzurro P, Carballo JE.1988. Earthquakes, records, and nonlinear responses. Earthquake Spectra;14(3):469-500.
2
[3] Mander JB.1994. Low-cycle fatigue behavior of semi-rigid top-and-seat angle connections. Engrg J, AISC:111-22.
3
[4] Mander JB, Pekcan G, Chen SS.1995. Low-cycle variable amplitude fatigue modeling of top-and-seat angle connections. Engineering Journal;32(2):54-62.
4
[1] Chai Y, Fajfar P.2000. A procedure for estimating input energy spectra for seismic design. Journal of Earthquake Engineering;4(04):539-61.
5
[2] Shome N, Cornell CA, Bazzurro P, Carballo JE.1988. Earthquakes, records, and nonlinear responses. Earthquake Spectra;14(3):469-500.
6
[3] Mander JB.1994. Low-cycle fatigue behavior of semi-rigid top-and-seat angle connections. Engrg J, AISC:111-22.
7
[4] Mander JB, Pekcan G, Chen SS.1995. Low-cycle variable amplitude fatigue modeling of top-and-seat angle connections. Engineering Journal;32(2):54-62.
8
[35] Popov, E.1987. Observation Mexico Earthquake of September 1985” Pacific Structural Steel Conference, 2, 237-255.
9
[36] Jankowski, R.2006.Pounding Force Response Spectrum Under Earthquake Excitation”, Engineering Structure, 28, 1149-1161.
10
[37].Abdullah, M., Hanif, H., Richardson, A., And Sobanjo, J.2001. Use Of A Shared Tuned Mass Damper (Stmd) To Reduce Vibration And Pounding In Adjacent Structures.”, Earthquake Engineering And Structural Dynamics, 30, 1185–1201.
11
[38].Anagnostopoulos, A.1988. Pounding Of Buildings in Series During Earthquakes”, Earthquake Engineering And Structural Dynamics, 16, 443–456.
12
[39].Maison, B.f., Kasai, K.1990. Analysis for Type of Structural Pounding”, Journal of Structural Engineering, 116, 957 – 975.
13
[40].Maison, B.f., Kasai, K.1992. Dynamics of Pounding When Two Buildings Collide”, Earthquake Engineering and Structural Dynamics, 21, 771 – 786.
14
[41].Arias, A.1970. saMEASURE OF EARTHQUAKE INTENSITY, Massachusetts Inst. of Tech., Cambridge. Univ. of Chile, Santiago de Chile.
15
ORIGINAL_ARTICLE
اثر مدلسازی اتصالات تیر – ستون و خاک بر رفتار لرزهای قابهای خمشی فولادی متوسط
اندرکنش خاک – سازه اختلاف موجود در پاسخ های سازه را درشرایط واقعی و تئوری با فرض تکیه گاه صلب بیان می کند و به مشخصاتی همچون سختی، جرم و میرایی خاک و سازه بستگی دارد. ساختمانهای دارای قاب خمشی از جمله سیستمهای سازه ای هستند که امروزه از فراوانی نسبتا بالایی برخوردار هستند. در این نوع قابها شکل پذیری توسط عواملی همچون تسلیم خمشی تیرها، ستونها و تسلیم برشی چشمه اتصال ستون حاصل می گردد. در این مقاله، تاثیر مدلسازی اتصالات تیر – ستون و اندرکنش خاک – فونداسیون - سازه بر پاسخ لرزه ای ساختمانهای 10 طبقه با سیستم سازه ای قاب خمشی فولادی متوسط واقع بر خاک نوع IV دارای سرعتهای موج برشی 150 و 80 متر بر ثانیه و خاک نوع II با سرعت موج برشی 560 متر بر ثانیه ارزیابی شده است. اتصالات بکار رفته برای این ساختمانها از نوع اتصالات از پیش تایید شده ی جوشی به کمک ورقهای روسری و زیرسری (WFP) هستند. به منظور بررسی عملکرد این ساختمانها، مدلهای اجزای محدود دو بعدی با فرض لحاظ اثر خاک و اتصالات، لحاظ اثر خاک و عدم لحاظ اثر اتصالات، تکیه گاه صلب و بدون لحاظ اثر اتصالات توسط نرم افزار OpenSees ساخته شده اند. این مدلها تحت تحلیلهای دینامیکی تاریخچه ی زمانی غیرخطی قرار گرفته و حداکثر پاسخ آنها با یکدیگر مقایسه گردیده است. نتایج بدست آمده نشان می دهد که در مدلهای واقع بر خاک نوع IV، لحاظ اثر خاک و اتصالات و یا فقط اثر خاک، منجر به افزایش حداکثر تغییرمکان جانبی و حداکثر تغییرمکان نسبی بین طبقه ای نسبت به مدلهای بدون لحاظ آنها و در مدلهای واقع بر خاک نوع II منجر به کاهش برخی از این پاسخها می گردد. در کلیه ی مدلها، لحاظ این دو عامل باعث کاهش حداکثر برش پایه می شود.
https://www.jsce.ir/article_56973_91f1225658e334d32760483a4b56f09b.pdf
2019-08-23
57
74
10.22065/jsce.2018.95059.1286
قاب خمشی فولادی متوسط
اندرکنش خاک فونداسیون سازه
اتصالات از پیش تأیید شده
تحلیل دینامیکی تاریخچه ی زمانی غیرخطی
اتصالات
حامد
رحمن شکرگزار
h_rshokrgozar@uma.ac.ir
1
استادیار،دانشگاه محقق اردبیلی، اردبیل، ایران
LEAD_AUTHOR
مریم
زارع آقبلاغ
zare.maryam.a@gmail.com
2
فارغ التحصیل مهندسی عمران-سازه از دانشگاه محقق اردبیلی
AUTHOR
احمد علی
خدایی اردبیلی
a.khodaiee@gmail.com
3
دانشجوی دکتری مهندسی عمران – ژئوتکنیک، دانشگاه صنعتی خواجه نصیرالدین طوسی، تهران، ایران
AUTHOR
[1] Rezaie Tabrizi, A. (2002). Investigation of the effect of soil – structure interaction on the nonlinear responses of tall
1
structures. M.SC. International Institute of Earthquake Engineering and Seismology, Iran.
2
[2] Harden, C.W. and Hutchinson, T.C. (2009). Beam–on–nonlinear–Winkler–foundation modeling of shallow, rocking –
3
dominated footings. Journal of Earthq spectra, 25 (2), 277 - 300.
4
[3] Raychowdhury, P. and Hutchinson, T.C. (2010). Sensitivity of shallow foundation response to model input parameters.
5
Journal of Geotechnical and Geoenvironmantal Engineering, 136 (3), 538-541.
6
[4] Raychowdhury, P. (2011). Seismic response of low-rise steel moment-resisting frame (SMRF) buildings incorporating
7
nonlinear soil–structure interaction (SSI). Engineering Structures, 33 (3), 958-967.
8
[5] Mekki, M. and Elachachi, S.M. and Breysse, D. and Zoutat, M. (2016). Seismic behavior of R.C. structures including
9
soil-structure interaction and soil variability effects. Journal of Engineering Structures, Vol. 126, 15-26.
10
[6] Ghandil, M. and Behnamfar, F. (2017). Ductility demands of MRF structures on soft soils considering soil-structure
11
interaction. Journal of Soil Dynamics and Earthquake Engineering, Vol. 92, 203-214.
12
[7] Mohammadpour, S. and Attarnezhad, R. and Behniya, K. (2011). Investigation of the effect of soil – structure
13
interaction on the variation of base level in the semi buried structures. In: 6th national Congress on Civil Engineering. Iran-
14
Semnan: Semnan university, 1-8.
15
[8] Tahghighi, H. and Arbabi, M. (2015). Investigation of steel structures response including nonlinear soil-structure
16
interaction. In: 10th International Congress on Civil Engineering. Iran-Tabriz: Tabriz university, 1-8.
17
[9] Datta, T.K. (2010). Seismic analysis of structures. India: John Wiley & Sons, 1-454.
18
[10] Stewart, J. P. and Fenves. G. L. and seed. R .B. (1999). Seismic soil-structure interaction in buildings, I: Analytical
19
methods and II: Empirical findings. Jouranal of Geotech & Geoenv Engrg. ASCE, 125 (1), 26-37.
20
[11] Harden, CW. and Hutchinson, T.C. and Martin, G.R. and Kutter, B.L. (2005). Numerical modeling of the nonlinear
21
cyclic response of shallow foundations. California: Pacific Earthquake Engineering Researche Center (PEER) report. 04, 1 –
22
[12] Raychowdhury, P. (2008). Nonlinear winkler-based shallow foundation model for performance assessment of
23
seismically loaded structures. Phd. University of California, San Diego.
24
[13] Madani, B. and Behnamfar, F. and Tajmir Riahi, H. (2015). Dynamic response of structures subjected to pounding and
25
structure–soil–structure interaction. Journal of Soil Dynamics and Earthquake Engineering. Vol.78, 46-60.
26
[14] Boulanger, R.W. and Curras, C.J. and Kutter, B.L. and Wilson, D.W. and Abghari, A. (1999). Seismic Soil-Pile-
27
Structure Interaction Experiments and Analyses. Journal of Geotechnical and Geoenvironmental Engineering. 125(9), 750-
28
[15] Raychowdhury, P. (2009). Effect of soil parameter uncertainty on seismic demand of low-rise steel buildings on dense
29
silty sand. Journal of Soil Dynamics and Earthquake Engineering. 29(10), 1367-1378.
30
[16] Rajeev, P. and Tesfamariam, S. (2012). Seismic fragilities of non-ductile reinforced concrete frames with consideration
31
of soil structure interaction. Journal of Soil Dynamics and Earthquake Engineering. Vol.40, 78-86.
32
[17] Boulanger, R. (2000). The PySimple1, TzSimple1, and QzSimple1 material models, documentation for the OpenSees
33
platform. URL: http://opensees. berkeley. edu.
34
[18] Building and Housing Research Center. (2015). Iranian Code of Practice for Seismic Resistance Design of Buildings:
35
Standard No. 2800 (4rd edition). Iran.
36
[19] Central Research and Building House. (2013). Iranian National Building Code, part 6, loads on building. Iran.
37
[20] Central Research and Building House. (2013). Iranian National Building Code, part 10, steel structures design. Iran.
38
[21] Central Research and Building House. (2013). Iranian National Building Code, part 7, foundations. Iran.
39
[22] Bowles, J. (1996). Foundation analysis and design. New York: McGraw-Hill Book Company, 1-1164.
40
[23] Meyerhof, G.G. (1963). Some Recent Research on the Bearing Capacity of Foundations. Canadian Geotechnical
41
Journal. 1(1), 16-26.
42
[24] OpenSees-Open System for Earthquake Engineering Simulation. Pacific Earthquake Engineering Research Center.
43
PEER. Richamond (CA, USA). http://opensees.berkeley.edu/.
44
[25] Ackroyd, M. (1987). Design of flexibility-connected unbraced steel building frames. Journal of Constructional Steel
45
Research, Vol. 8, 261-286.
46
[26] Li, G.Q. and Li, J.J. (2007). Advanced analysis and design of steel frames. China: John Wiley & Sons, 1-368.
47
[27] FEMA 350. (2000). Recommended seismic design criteria for new steel moment-frame buildings. SAC Joint Venture:
48
Washington, DC.
49
[28] Gazetas, G. (1991). Formulas and Charts for Impedances of Surface and Embedded Foundations. Journal of
50
Geotechnical Engineering. 117(9), 1363-1381.
51
54 نشریه علمی – پژوهشی مهندسی سازه و ساخت، دوره 6، شماره 2، سال 9318 ، صفحه 75 تا 54
52
[29] 〈http://peer.berkeley.edu/peer_ground_motion_database〉.
53
[30] Bardet, J. and Tobita, T. (2001). NERA, A computer program for Nonlinear Earthquake site Response Analyses of layered soil deposits. Univ. of Southern California.
54
ORIGINAL_ARTICLE
مطالعه پارامتریک رفتار دینامیکی مخازن ذخیره مایعات تحت تحریکات پالسگونه
مخازن ذخیره سیالات به طور گسترده برای ذخیره مایعات مختلف همانند فرآوردههای نفتی در صنایع استفاده میشوند و صدمه دیدن آنها پیامدهای خطرناکی را به همراه خواهد داشت. زلزلههای حوزه نزدیک گسل با دارا بودن پالسهای شدید سرعت، پتانسیل آسیب زدن به چنین سازههایی را دارند. این نوع تحریکات زمین میتوانند به صورت توابع تحلیلی پالسگونه ارائه شوند. در این تحقیق رفتار لرزهای مخازن ذخیره سیالات تحت چنین تحریکات پالسگونه بصورت پارامتریک بررسی میشود. برای این منظور ابتدا مخازن با مدلهای مکانیکی معادل شبیهسازی شده و سپس آنالیز دینامیکی آنها تحت این نوع تحریکات انجام میشود. مدل تحلیلی پالس انتخاب شده بر پایه توابع موجک بوده که دارای چهار ویژگی دامنه، پریود، شکل و تعداد پالس است. تاثیر هر یک از این متغیرها در انواع پاسخهای دینامیکی و نیز تاثیر نسبت ابعادی مخزن ارزیابی میشود. نتایج حاصله بیانگر این است که پالسهایی با پریود بلند با توجه به بالا بودن زمان تناوب مود نوسانی، جابجایی قائم سطح آزاد سیال و پالسهایی با پریود کوتاه به لحاظ پایین بودن زمان تناوب ضربانی، برشپایه و ممان واژگونی را تحت تاثیر و تشدید قرار میدهند. همچنین با افزایش تعداد پالس، پاسخها در حوالی پریود پالس نزدیک به زمان تناوب نوسانی افزایش چشمگیری مییابند. این در حالی است که شکل پالس از نظر متقارن یا پاد متقارن بودن تاثیر محسوسی بر نتایج حاصل ندارد.
https://www.jsce.ir/article_56974_7802a93488281a1c08d6e5a08e034c4b.pdf
2019-08-23
75
86
10.22065/jsce.2018.95816.1297
مخازن ذخیره مایعات
زلزله حوزه نزدیک گسل
تحریک پالسگونه
اندرکنش سازه و سیال
پاسخ لرزهای
سامان
باقری
s_bagheri@tabrizu.ac.ir
1
گروه سازه، دانشکده مهندسی عمران، دانشگاه تبریز، تبریز، ایران
LEAD_AUTHOR
حسین
حیاتیراد
hossein.raad.hayati@gmail.com
2
گروه سازه، دانشکده مهندسی عمران، دانشگاه تبریز، تبریز، ایران
AUTHOR
[1] Housner GW (1957). Dynamic pressures on accelerated fluid containers. Bulletin of the Seismological Society of America, 47(1): 15-35
1
[2] Housner GW (1963). The dynamic behaviour of water tanks. Bulletin of the Seismological Society of America, 53(2): 381-387.
2
[3] Haroun MA, Housner GW (1981). Seismic design of liquid storage tanks. Journal of the Technical Councils of ASCE, 107(1):191–207.
3
[4] Haroun MA (1983). Vibration studies and test of liquid storage tanks. Earthquake Engineering and Structural Dynamics, 11(2): 179–206.
4
[5] Malhotra PK, Wenk T, Wieland M (2000). Simple procedure for seismic analysis of liquid storage tanks. Structural Engineering International, 10(3): 197-201.
5
[6] Virella JC, Godoy LA, Suarez LE (2006). Fundamental modes of tank–liquid systems under horizontal motions. Engineering Structures, 28(10): 1450–1461.
6
[7] Ozdemir Z, Souli M, Fahjan YM (2010). Application of nonlinear fluid-structure interaction methods to seismic analysis of anchored and unanchored tanks. Engineering Structures, 32(2): 409–423.
7
[8] Buratti N, Tavano M (2014). Dynamic buckling and seismic fragility of anchored steel tanks by the added mass method. Earthquake Engineering and Structural Dynamics, 43(1): 1–21.
8
[9] Malhotra PK (1999). Response of buildings to near-field pulse-like ground motions. Earthquake Engineering and Structural Dynamics, 28(11): 1309-1326.
9
[10] Bagheri S, Rofooei FR, Bozorgnia Y (2005). Evaluation of the seismic response of liquid storage tanks. In: 10th International Conference on Civil, Structural and Environmental Engineering Computing, Rome, Italy.
10
[11] Razzaghi MS, Eshghi S (2004). Behaviour of steel oil tanks due to near-fault ground motion. In: 13th World Conference on Earthquake Engineering, Vancouver, British Columbia.
11
[12] Sreekala R, Prasad AM, Muthumani K, Lakshmanan N, Iyer NR (2012). Dynamic response of liquid tanks during near fault earthquakes. In: 15th World Conference on Earthquake Engineering, Lisboa, Portugal.
12
[13] Zama S, Nishi H, Hatayama K, Yamada M, Yoshihara H, Ogawa Y (2012). On damage of oil storage tanks due to the 2011 off the pacific coast of tohoku earthquake (Mw 9.0). Japan, In: 15th World Conference on Earthquake Engineering, Lisboa, Portugal.
13
[14] Alavi B, Krawinkler H (2004). Behaviour of moment-resisting frame structures subjected to near-fault ground motions. Earthquake Engineering and Structural Dynamics, 33(6): 687-706.
14
[15] Baker JW (2007). Quantitative classification of near-fault ground motions using wavelet analysis. Bulletin of Seismological Society of America, 97(5): 1486–1501.
15
[16] Mavroeidis GP, Papageorgiou AS (2003). A mathematical representation of near-fault ground motions. Bulletin of The Seismological Society of America, 93(3): 1099–1131.
16
[17] Mavroeidis GP, Dong G, Papageorgiou AS (2004). Near-fault ground motions, and the response of elastic and inelastic
17
single-degree-of-freedom (SDOF) systems. Earthquake Engineering and Structural Dynamics, 33(9): 1023–1049.
18
[18] Bozorgnia Y, Bertero V (2004). Earthquake Engineering: From Engineering Seismology to Performance-Based Engineering. Boca Raton, CRC Press.
19
[19] Malhotra PK (1997). New method for seismic isolation of liquid storage tanks. Earthquake Engineering and Structural Dynamics, 26(8): 839–847.
20
[20] Bagheri S, Farajian M (2016). The effects of input earthquake characteristics on the nonlinear dynamic behaviour of FPS isolated liquid storage tanks. Journal of Vibration and Control, published online before print June 20, 2016, doi: 10.1177/1077546316655914.
21
ORIGINAL_ARTICLE
اثر محتوای فرکانسی زلزله بر پاسخ دینامیکی مخازن بتنی مستطیلی با استفاده از روش ترکیبی المان محدود و هیدرودینامیک ذرات هموار
مخازن زمینی بتنی، کاربرد گستردهای در ذخیره آب، فاضلاب، نفت، مواد شیمیاییِ سمی و سایر مایعات دارند. بنابراین با توجه به نوع کاربری آنها، به طور معمول در رده سازههای با اهمیت خیلی زیاد شریانهای حیاتی قرار دارند؛ در نتیجه تحلیل دینامیکی مخازن ذخیره مایعات از موضوعات مهم در مهندسی زلزله است. از طرفی بررسی رفتار لرزهای مخازن و اندرکنش مایع درون آن اهمیت بسزایی دارد. در این مطالعه محیط آب به روش هیدرودینامیک ذرات هموار و سازه مخزن به روش اجزای محدود مدلسازی شدند. روش هیدرودینامیک ذرات هموار که یک روش بدون مش است دارای مزایای فروانی نسبت به دیگر روشهای سنتیِ بر پایه شبکهبندی میباشد. به منظور صحت سنجی، درستی مدلسازی با نتایج آزمایشگاهی و عددی موجود مقایسه شد، دلایل و پارامترهای موثر در انتخاب رکوردها بیان، و سپس مخزن مدلسازی شده تحت تاثیر رکورد زلزلههای با محتوای فرکانسی مختلف به صورت تاریخچه زمانی تحلیل گردید. پارامترهای ارتفاع تلاطم، شتاب در بالای دیواره مخزن، برش پایه، نیرو در عرض واحد و جابهجایی دیواره برای مقایسه بدست آورده شدند و در انتها تاثیر محتوای فرکانسی با در نظر گرفتن تاثیر اندرکنش آب-سازه بر مخزن بررسی گردید. نتایج نشان داد که رکورد با محتوای فرکانسی کمتر منجر به تلاطم با ارتفاع بیشتر میشود؛ در حالی که رکورد با محتوای فرکانسی متوسط علیرغم ارتفاع تلاطم کمتر باعث به وجود آمدن پاسخهای بزرگتر سازه مخزن میگردد. همچنین مشاهده شد که فرکانسهای غالب تلاطم با کاهش محتوای فرکانسی زلزله، افزایش پیدا میکند.
https://www.jsce.ir/article_56975_d963ad874469b49b4a5b3c50f8202d8f.pdf
2019-08-23
87
102
10.22065/jsce.2018.100667.1348
مخازن بتنی
هیدرودینامیک ذرات هموار
محتوای فرکانسی
ارتفاع تلاطم
اندرکنش آب-سازه
محمد
صافی
m_safi@sbu.ac.ir
1
استادیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
LEAD_AUTHOR
سپهر
رسول پور
rassoulpour1@yahoo.com
2
کارشناس ارشد مهندسی زلزله، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
AUTHOR
عباس
مهدویان
a_mahdavian@sbu.ac.ir
3
دانشیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
AUTHOR
[1] G. W. Housner. (1963). The dynamic behavior of water tanks. Bull. Seismol. Soc. Am., vol. 53, no. 2, pp. 381–387.
1
[2] M. A. Haroun. (1983). Vibration studies and tests of liquid storage tanks. Earthq. Eng. Struct. Dyn., vol. 11, no. 2, pp. 179–206.
2
[3] J. K. Kim, H. M. Koh and I. J. Kwahk. (1996). Dynamic response of rectangular flexible fluid containers. J. Engng. Mech. ASCE 122, 807—817.
3
[4] Koh HM, Kim JK, Park JH. (1998). Fluid-structure interaction analysis of 3D rectangular tanks by a variationally coupled BEM-FEM and comparison with test results. Earthquake Engineering and Structural Dynamics; 27:109–124.
4
[5]. Lucy L.B. (1977). A numerical approach to the testing of the fission hypothesis // Astron. J.. Vol. 82, p. 1013–1024.
5
[6]Gingold R.A., Monaghan J.J. (1977). Smoothed particle hydrodynamics: theory and application to non-spherical stars Mon. Not. R. Astr. Soc.. 181:375–389.
6
[7]Lucy L.B. (1977). A numerical approach to the testing of the fission hypothesis. Astron. J.. Vol. 82, p. 1013–1024.
7
[8] Gingold R.A. (1978). Monaghan J.J. Binary fission in damped rotating polytropes. Mon. Not. R. astr. Soc vol. 184, pp. 481–499.
8
[9] Monaghan J.J. (1982). Why particle methods work. J. Sci. Stat. Comput. Vol. 3, No. 4, pp. 422–433.
9
[10]Benz W., Hills J.G. (1987). Three-dimensional hydrodynamical simulations of stellar collisions. I-Equal-mass main-sequence stars. The Astrophysical Journal Vol. 323, pp. 614– 628.
10
[11] Slattery W.L., Benz W. (1992)., Cameron A.G.W. Giant impacts on a primitive Uranus Icarus, Vol. 99 1, pp. 167–174.
11
[12] Gingold R.A., Monaghan J.J. (1982). Kernel estimates as a basis for general particle methods in hydrodynamics // J.Comp.Phys. 46 pp. 429–453.
12
[13]. Monaghan J.J. (1985). Particle methods for hydrodynamics. Comput. Phys. Rep.. Vol. 3, p. 71–124.
13
[14] Monaghan J.J. (1992). Smoothed particle hydrodynamics. Annu. Rev. Astron. Astrophys.. 30:543–574.
14
[15] Monaghan J.J., Thompson M.C., Hourigan K. (1994). Simulation of free surface flows with SPH. Proc. of ASME Symposium on Computational Methods in Fluid Dynamics. Lake Tahoe, USA, June 19–23.
15
[16] Libersky L.D., Petscheck A.G., Carney T.C., Hipp J.R., Allahdadi F.A. (1993). High strain Lagrangian hydrodynamics – a three-dimensional SPH code for dynamic material response. J. of Comp. Phys.. 109:67–75.
16
[17] Cummins S.J., Rudman M. (1999). An SPH projection method. J. Comput. Phys.. 152:584–607. [18] Wilkins, M.L. (1999), Computer simulation of dynamic phenomena, Berlin, Springer-Verlag ,p.61.
17
ORIGINAL_ARTICLE
تاثیر نانورس بر دوام تیرهای بتن مسلح تحت بارهای بهرهبرداری و تهاجم کلراید
دوام بتنهای مسلح در محیطهای خورنده در سالهای اخیر با استفاده از افزودنیهای مختلف افزایش یافته است. در این تحقیق نیز نانو ذرات رس به میزان ۰/۵، ۱ و ۱/۵ درصد وزنی سیمان، جایگزین سیمان در طرح اختلاط شاهد شده اند. بر همین اساس 24 عدد تیر بتن مسلح پس از 28 روز عمل آوری در آب به سه گروه تقسیم بندی شدند که در هر گروه میزان جایگزینی نانو ذرات رس متغیر میباشد. گروه اول شامل 8 عدد تیر که پس از 28 روز عمل آوری در آب تحت آزمایش خمشی قرار گرفتند. گروه دوم و سوم نیز هر کدام شامل 8 عدد تیر بودند که پس از ۲۸ روز عمل آوری در آب به مدت 6 ماه در محلول کلراید و چرخه تر و خشک قرارگرفته و سپس تحت آزمایش خمشی قرار گرفتند، با این تفاوت که تیرهای گروه سوم در مدت 6 ماه قرارگیری در محلول خورنده تحت بارگذاری نیز قرار داشتند. همچنین مقاومت فشاری و جذب آب کلیه طرح اختلاطها در سنین مختلف اندازه گیری گردید. نتایج نشان داد که افزودن نانورس به بتن باعث کاهش قابل توجه مقاومت فشاری شده و همین امر باعث میگردد که ظرفیت خمشی تیرها نیز کاهش یابد. علاوه بر این افزودن نانورس به بتن باعث کاهش جذب آب نیم ساعته و افزایش جذب آب 24 ساعته میشود. ضمناً نتایج نشان داد که قرارگیری تیرها در محلول کلراید و سیکلهای تر و خشک باعث کاهش ظرفیت خمشی تیرها میگردد، اما بارگذاری تیرها تاثیر مخرب محلول کلراید را کاهش میدهد. همچنین تیرهای حاوی نانورس در برابر تهاجم کلرایدها به مراتب عملکرد بهتری داشتند.
https://www.jsce.ir/article_56976_b983cb6d66745b8c08f10a84e539ea0a.pdf
2019-08-23
103
118
10.22065/jsce.2018.98869.1337
نانورس
تیر بتن مسلح
بار بهره برداری
یون کلراید
سیکل تر و خشک
خوردگی آرماتور
طالب
رودیان
taleb.roodian@yahoo.com
1
گروه مهندسی عمران، دانشگاه یاسوج
AUTHOR
حمید
رحمانی
hrahmani@znu.ac.ir
2
گروه مهندسی عمران، دانشگاه زنجان
LEAD_AUTHOR
شهاب الدین
حاتمی
hatami@yu.ac.ir
3
گروه مهندسی عمران، دانشگاه یاسوج
AUTHOR
[1] Shekarchizadeh, M., Doosti, A. and Mardani, F. (2008), Effect of chloride binding on the reduction of bars corrosion in the reinforced concrete structures, 4th National Congress on Civil Engineering, University of Tehran, Tehran (In Persian).
1
[2] Shekarchizadeh, M., Chini, M. and Moradian, M. (2012), Assessment of rebars corrosion in the high performance concrete under Persian Gulf region, case study, 4th National Congress of Concrete, Iranian Concrete Institute, Tehran (In Persian).
2
[3] Shekarchizadeh, M., Valipour, M. and Pargar, F. (2010), Effect of Silica Fume, Metakaolin, Zeolite and Polypropylene Fiber on Chloride Diffusion in Concrete, Journal of Civil Engineering (Ferdowsi University of Mashhad), Vol. 22 (1), 83-96 (In Persian).
3
[4] Ramezanianpour, A. A. and Pourkhorshidi, A. R. (2006), Assessment of durability of marine concrete structures with different cements and pozzolans in Persian Gulf Environment, 7th International Conference on Coasts, ports and Marine Structures, Port and Maritime Organization, Tehran.
4
[5] Ganjian, E. and Sadeghipouya, H. (2009), The effect of Persian Gulf tidal zone exposure on durability of mixes
5
containing silica fume and blast furnace slag, Construction and Building Materials, Vol. 23 (2), 644-652.
6
[6] Gruber, K. A., Ramlochan, T., Boddy, A., Hooton, R. D. and Thomas, M. D. A. (2001), Increasing concrete durability with high-reactivity metakaolin, Cement and Concrete Research, Vol. 23 (6), 479-484.
7
[7] Faraji, H. K. and Afshin, H. (2005), Durability of reinforced Concrete containing different pozzolanas in Urmia lake region, 2nd National Congress on Civil Engineering, Iran University of Science and Technology, Tehran, Iran (In Persian).
8
[8] Bai, J. and Wild, S. (2002), Investigation of the temperature change and heat evolution of mortar incorporating PFA and metakaolin, Cement and Concrete Composites, Vol. 24 (2), 201-209.
9
[9] Chehkandi, S., Miri, M. and Givechi, M. (2011), Durability of self-compacting concrete containing nano-silica under sea water and tidal conditions, 6th National Congress on Civil Engineering, Semnan University, Semnan (In Persian).
10
[10] Tasnimi, A. and Khorami, M. (2005), Effect of reinforcement corrosion on the flexural strength of reinforced concrete structures under cyclic vertical loads, 2nd International Conference on Concrete and Development, Road, Housing and Urban development Research Center, Tehran.
11
[11] Pourbehi, P. and Behfarnia, K. (2006), Long term effect of reinforcement's corrosion on the load bearing capacity of concrete elements under seawater region, 7th International Congress on Civil Engineering, Tarbiat Modares University, Tehran.
12
[12] Vidal, T., Castel, A. and François, R. (2007), Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment, Cement and Concrete Research, Vol. 37 (11), 1551-1561.
13
[13] Building National Regulations Office, (2012), 9th part of building national regulations, Design and construction of reinforced concrete structures, Tehran, Toseae Nasre Iran.
14
[14] Neville, A. M. and Brooks, J. J. (2010), Concrete Technology, Prentice Hall, New Jersey, 409-414.
15
[15] Al-Tayyib, A. J. and Shamim K. M. (1991) Effect of sulfate ions on the corrosion of rebars embedded in concrete, Cement and Concrete Composites, Vol. 13 (2), 123-127.
16
[16] Dillshad, K. H. A. (2011), Degree of Hydration and Strength Development of Low Water-to-Cement Ratios in Silica Fume Cement System, International Journal of Civil & Environmental Engineering IJCEE-IJENS, Vol. 11(5), 10-15.
17
[17] Mahmoodi, A., Afshin, H., Hakimzadeh, H. and Jalali D. (2009) Investigation of the reinforced concrete durability in severe corrosive marine environment according to its position with respect to sea level, Journal of Marine Engineering, Vol. 5 (10), 77-87.
18
ORIGINAL_ARTICLE
بررسی رفتار لرزه ای ساختمانهای بلند لوله ای با درنظرگرفتن اثرات اندرکنش خاک و سازه
در ساختمانهای بلند با سیستم لولهای ستونها و تیرهای اطراف سازه وظیفه تحمل بارهای جانبی را به عهده دارند. در این سیستم سازهای در حالت ایدهال کل سازه به صورت یک تیر طره رفتار کرده و ستونهای سازه در دو وجه مقابل هم بهطوریکنواخت به کشش و فشار باربری مینمایند ولی با توجه به تغییرشکل ایجادشده در تیرهای محیطی سازه، یکنواختی تنش در ستونهای محیطی دچار خلل شده و پدیده لنگیبرشی ایجاد میگردد. میزان اثر پدیده لنگیبرشی به عواملی مانند انعطافپذیری تیرهای جانبی، فاصله و ابعاد ستونهای جانبی، ارتفاع سازه و دیگر مشخصات سازه بستگی دارد. تعیین اثر پدیده لنگیبرشی بر توزیع نیروی جانبی بین المانهای سازهای اهمیت زیادی دارد. در این تحقیق میزان تاثیر اندرکنشخاکوسازه بر پدیده لنگیبرشی، تغییرشکلها، نحوه توزیع نیروهای جانبی بین ستونهای محیطی ساختمان و روند تشکیل مفصلهای پلاستیک در سازههای لولهای بتنآرمه بررسی میشود. همچنین مقایسهای بین نتایج تحلیل خطی و غیرخطی صورت گرفته و اثرات تشکیل مفصلهای پلاستیک با در نظر گرفتن تاثیرات ثانویه P-Delta بر تغییرشکلها و رفتار کلی سازه بررسی شدهاست. در این تحقیق با مدل کردن یک ساختمان بتنی 50 طبقه با سیستم لولهای و تحلیل رفتار لرزهای سازه تحت اعمال بارهای جانبی ناشی از زلزله در دو حالت با و بدون درنظرگرفتن اثر اندرکنشخاکوسازه مورد بررسی قرار گرفته است. نتایج نشان میدهد که بهطورکلی وجود اندرکنشخاکوسازه باعث کاهش پدیده لنگیبرشی و افزایش تغییرشکل میشود همچنین تشکیل مفصلهای پلاستیک اثر زیادی بر رفتارکلی و تغییر شکل سازه لولهای خواهد داشت.
https://www.jsce.ir/article_57407_8081aede063150973ba3f876faa0f507.pdf
2019-08-23
119
140
10.22065/jsce.2018.95818.1298
لنگیبرشی
سازه لولهای
اندرکنشخاکوسازه
تاثیرات ثانویه P-Delta
تحلیل بارافزون استاتیکی غیرخطی
فرزاد
اعتدادی علی آبادی
farzad.etedadi@gmail.com
1
کارشناس ارشد سازه
AUTHOR
محمد مهدی
معمارپور
memarpour@eng.ikiu.ac.ir
2
استادیار، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی
LEAD_AUTHOR
[1] Taranath, B.S. (2010). Reinforced Concrete Design of Tall Buildings. Taylor & Francis.
1
[2] Taranath, B.S. (2005). Wind and Earthquake Resistant Buildings Structural Analysis and Design. Marcel Dekker, Inc.
2
[3] Smith, B.S. and Coull, A. (1991). Tall Building Structures Analysis and Design. John Wiley and Sons, Inc.
3
[4] Günel, M.H. and Ilgin, H.E. (2014). Tall Buildings: Structural Systems and Aerodynamic Form. Taylor & Francis Group.
4
[5] Hummelen, J. (2010). Precast Concrete in Framed Tube High-Rise Structures. MSc Thesis, Delft University of Technology.
5
[6] Nouri, F. and Ashtari, P. (2013). Investigation of the Shear Lag Phenomenon and Structural Behavior of Framed-Tube and Braced-Tube Tall Structures. International Conference of Civil Engineering, Iran –Tabriz.
6
[7] Lee, K.K. and Lee, L.H. and Lee, E. J. (2002). Prediction of Shear Lag Effects in Framed-Tube Structures with Internal Tube(s). The Structural Design of Tall Buildings, 11(2), pages 73-92.
7
[8] Naderpour, H. and Kheyroddin, A. (2011). Investigation of the shear lag in RC tall buildings with tubular systems. Journal of Modeling in Engineering, Vol. 9, No. 26.
8
[9] Leonard, J. (2004). Investigation of Shear Lag Effect in High-rise Buildings with Diagrid System. MSc Thesis. Illinois Institute of Technology.
9
[10] Gaur, H. and Goliya, R.K. (2015). Mitigating Shear Lag in Tall Buildings. International Journal of Advanced Structural Engineering (IJASE), 7(3), pages 269-279.
10
[11] Mazinani, I. and Jumaat1a, M.Z. and Ismail, Z. and Chao, O.Z. (2014). Comparison of Shear Lag in Structural Steel Building with Framed Tube and Braced Tube. Structural Engineering and Mechanics, 49(3), pages 297-309.
11
[12] Hoseini Vaez, S.R. and Naderpour, H. and Kheyroddin, A. (2014). The Effect of RC Core on Rehabilitation of Tubular Structures. Journal of Rehabilitation in Civil Engineering.
12
[13] Kwan, A.K.H. (1994). Simple Method for Approximate Analysis of Framed Tube Structures. Journal of Structural Engineering, pages 1221-1239.
13
[14] Wolf, JP. (1985). Dynamic soil-structure interaction. Englewood Cliffs, N.J. Prentice-Hall, Inc.
14
[15] Gazetas, G. (1991). Foundation vibrations. Foundation engineering handbook, Springer, pages 553–93.
15
[16] Mylonakis, G. and Gazetas, G. (2000). Seismic soil-structure interaction: beneficial or detrimental. Journal of Earthquake Engineering, 4(3), pages 277-301.
16
[17] Gazetas, G. and Mylonakis, G. (1998). Seismic soil-structure interaction: new evidence and emerging issues. Geotechnical earthquake engineering and soil dynamics III, vol.2, pages 1119-74.
17
[18] Venanzi, I. and Salciarini, D. and Tamagnini, C. (2014). The effect of soil–foundation–structure interaction on the wind-induced response of tall buildings. Engineering Structures, Volume 79, pages 117–130.
18
[19] Stewart, J.P. and Fenves, G.L. and Seed, R.B. (1999). Seismic soil-structure interaction in buildings. I: analytical methods. Journal of Geotechnical and Geoenvironmental Engineering, 125(1), pages 26-37.
19
[20] Mengke Lia and Xiao Lub and Xinzheng Lua and Lieping Yea. (2014). Influence of soil–structure interaction on seismic collapse resistance of super-tall buildings. Journal of Rock Mechanics and Geotechnical Engineering, Volume 6 (Issue 5), Pages 477–485.
20
[21] ACI-318-11, (2011). Building Code Requirements for Structural Concrete and Commentary. Prepared by American Concrete Institute committee 318.
21
[22] FEMA 356, (2000). Prestandard and Commentary for the Seismic Rehabilitation of Buildings. Prepared by the SEAOC, ATC, and CUREE Joint Venture for the Federal Emergency Management Agency.
22
[23] NIST GCR 12-917-21, (2012). Soil-Structure Interaction for Building Structures. Prepared by the NEHRP Consultants Joint Venture, a partnership of the Applied Technology Council and the Consortium of Universities for Research in Earthquake Engineering, for the National Institute of Standards and Technology, Gaithersburg, Maryland.
23
ORIGINAL_ARTICLE
بررسی تأثیر افزایش دما بر روی بتن های حاوی فنر فلزی بازیافتی و مقایسه با الیاف های رایج
استفاده از الیاف یا مواد بازیافتی در بتن، باعث بهبود مقاومت، شکلپذیری و دوام بتن میشود. بتن دارای خواص ضد حریق بوده لکن بیشترین نگرانی از سازههای بتنآرمه در زمان آتشسوزی مربوط به میلگردها است. لذا یکی از پیشنهادات به منظور کاهش خطرات فوق، استفاده از مصالح جایگزین نظیر فنر فلزی بازیافتی می باشد. در این مقاله به مطالعهی آزمایشگاهی عملکرد بتنهای حاوی فنر فلزی بازیافتی با بکار بردن درصدهای حجمی 2/0، 4/0 و 6/0 تحت دماهای 25، 100، 250، 500، 700 و 900 درجهی سانتیگراد پرداخته شد. پس از سرد شدن نمونهها، مقاومت فشاری و کششی بهینهترین درصد اختلاط فنر در بتن، با بتن حاوی الیاف فولادی و پلیپروپیلن مقایسه شد. نتایج حاکی از آن است که استفاده از مقدار 2/0 درصد فنر در بتن با باعث بهبود مقاومت فشاری و کششی بتن تا حدود 3 برابر نمونهی شاهد شده، اما هرچه میزان استفاده از آن در بتن افزایش یابد از مقاومت آن نیز کاسته میشود. همچنین مقاومت فشاری بتن با درصد بهینهی فنر در دماهای مختلف حدود 2 الی 3 برابر بتن حاوی الیاف فولادی و پلیپروپیلن بوده و مقاومت کششی آن نیز تا حدودی نزدیک به مقاومت الیاف فولادی میباشد. همچنین وجود فنر در بتن، عرض ترکهای بوجود آمده پس از انجام تست مقاومت کششی را تا 3 برابر کاهش میدهد.
https://www.jsce.ir/article_57408_a1ef074385afd0cec71e06baae6de2b7.pdf
2019-08-23
141
156
10.22065/jsce.2018.93911.1278
بتن فنری
مقاومت فشاری
مقاومت کششی
فنر فلزی بازیافتی
الیاف فولادی
الیاف پلی پروپیلن
دماهای بالا
مجید
قلهکی
mgholhaki@semnan.ac.ir
1
دانشیار، دانشگاه سمنان، سمنان، ایران
LEAD_AUTHOR
قاسم
پاچیده
pachideh@sharif.edu
2
دانشجوی دکترای سازه دانشگاه سمنان
AUTHOR
[1] Banthia N, Sheng J. (1996). “Fracture toughness of micro-fiber reinforced cement composites”. Cem Concr Comp. 18(4):251–69.
1
[2] Bayasi MZ, Zeng J. (1997). “Composite slab construction utilizing carbon fiber reinforced mortar”. ACI Struct J 94(4):442–6.
2
[3] Dwarakanath HV, Nagaraj TS. (1992). “Deformational behavior of fiber-reinforced concrete beams in bending”. J Struct Eng ASCE;118(10):2691–8.
3
[4] Mu B, Li Z, Peng J. (2000). “Short fiber-reinforced cementitious extruded plates with high percentage of slag and different fibers. Cem Concr Res. 30(8):1277–82.
4
[5] Li VC, Kanda T. (1998). “Engineered cementitious composites for structural applications”. J Mater Civil Eng ASCE 10(2):66–9.
5
[6] Kanda T, Li VC. (1998) “Interface property and apparent strength of a high-strength hydrophilic fiber in cement matrix”. J Mater Civ Eng ASCE;10(1):5–13.
6
[7] Li VC, Horii H, Kabele P, Kanda T, Lim YM. (2000). “Repair and retrofit with engineered cementitious composites”. Eng Fract Mech. 65(2–3):317–34.
7
[8] Limbachiya, M. C., Leelawat, T., & Dhir, R. K. (2000). “Use of recycled concrete aggregate in high-strength concrete”. Materials and Structures, 33, 574–580.
8
[9] Ajdukiewicz, A. Kliszczewicz, A. (2002) “Influence of recycled aggregates on mechanical properties of HP/HPC”, Cement and Concrete Composite. 24(2): 269-279.
9
[10].C.A. Carneiro, P.R.L. Lima, M.B. Leite, R.D.T. Filho, (2008). “Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete”, Cement and Concrete Composites, Vol. 46, pp. 886-893.
10
[11] Khaloo, A. Khodavirdi, M.M. Hoseini, P. (2010). “Analysis the Building of Self-Compacting Concrete Using Coarse Recycled Grains". Journals of Concrete Research. Year Three, No.1, pp. 9-20.
11
[12] Sung Bae Kim, Na Hyun Yi, Hyun Young Kim, Jang-Ho Jay Kim, Young-Chul Song. (2010). “Material and structural performance evaluation of recycled PET fiber reinforced concrete”, Cement & Concrete Composites. 32, 232-240.
12
[13]. W.C. Choi, H.D. Yun, (2012). “Compressive behaviour of reinforced concrete columns with recycled aggregate under uniaxial loading”, Engineering Structure, Vol. 41, pp. 285–293.
13
[14] Sadrmomtazi, A. Tahmooresi, M.H. Nosrati, H. (2014). “ Evaluration of Fiber Reinforced Containing Recyvled Concrete Aggregates with Non-Destructive Methods”. Journal of Conncrete Thechnology. (6), Vol. 1, pp. 73-86.
14
[15] Ahmadi, M. Hassani, A. Soleymani, M. (2015). “Role of Recycled Steel Fibers from Tires on Concrete Containing Recycled Aggregate from Building Waste”. Journal of Conncrete Thechnology. (7), Vol. 2, pp. 57-68
15
[16] M. Mastali, A. Dalvand, A. Sattarifard, (2016). “The impact resistance and mechanical properties of the reinforced self compacting concrete incorporating recycled CFRP fiber with different lengths and dosages”. Composites. DOI: 10.1016/j.compositesb.
16
[17] Shirazi Bidabadi, M. Akbari, M. (2017). “Evaluation of Mechanical Properties of Fiber-Reinforced Recycled Concrete: The Effect of Dimensions and Amount of Recycled Aggregate, Type and Amount of Fibers". Journal of Structural engineering and construction. Fourth Year, No.1, pp. 138-150.
17
[18] Gao, Danying. Yan, Dongming. Li, Xiangyu. (2012) “Splitting strength of GGBFS concrete incorporating with steel fiber and polypropylene fiber after exposure to elevated temperatures”, Fire Safety Journal,Volume54, pages 67-73. [19] Park, Y., Abolmaali, A., Mohammadagha, M. and Lee, S. (2014). “Flexural Characteristics of Rubberized Hybrid Concrete Reinforced with Steel and Synthetic Fibers”, Advances in Civil Engineering Materials (ASTM), 3(1), pp. 495-508. [20] Park, Y., Abolmaali, A., Mohammadagha, M. and Lee, S. (2015). “Structural performance of dry-cast rubberized concrete pipes with steel and synthetic fibers”, Construction and Building Materials, 77, pp. 218-226.
18
[21] Vahid Afroughsabet a, Togay Ozbakkaloglu, (2015). “Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers”, Construction and Building Materials, 94,73–82.
19
[22] Serrano, Ruben. Cobo, Alfonso. Prieto, Maria Isabel. Gonzalez, Maria de las Nieves. (2016). “Analysis of fire resistance of concrete with polypropylene or steel fibers”. Construction and Building Materials. Volume122, pages 302-309.
20
[23] Yermak, N. Pliya, P. Beaucour, A-L. Simon, A. Noumowe, A. (2017). “Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: Spalling, transfer and mechanical properties”, Construction and Building Materials, Volume 132, pages 240-250.
21
[24] Gholhaki, M. Pachideh,GH. Rezaeefar, O. (2017). “Experimental Study on Mechanical Properties of Concrete Containing Steel Fibres, and Polypropylene in high temperatures”, Journal of Structural and Construction Engineering (JSCE). DOI: 10.22065/jsce.2017.77392.1072.
22
[25] INSO581, (2015). concrete-making curing concrete test specimens in the laboratory- code of practice, 2nd.revision.
23
[26] NF EN 12390-13 AFNOR, (2013). Testing hardened concrete, in: Determination of Secant Modulus of Elasticity in Compression, pages 18–455.
24
ORIGINAL_ARTICLE
تعیین ظرفیت باربری محوری ستون های بتنی مسلح شده با آرماتورهای طولی مارپیچ با استفاده از روش اجزای محدود و شبکه عصبی مصنوعی
ستونهای بتنی با آرماتورهای طولی مارپیچ ایدهی جدیدی در طراحی هستند که در سالهای اخیر مورد توجه محققین قرار گرفتهاند. این ستونها قابلیت باربری و شکلپذیری زیادی در مقایسه با ستونهای مسلح شده با آرماتورهای طولی مرسوم دارند. کلیه مطالعات در این زمینه به چند کار ازمایشگاهی بر روی پیکربندیهای مختلف آرماتور مارپیچ محدود شدهاند. در این مقاله برای نخستین بار، ستونهای مسلح شده به آرماتور مارپیچ بوسیلهی روش اجزای محدود شبیهسازی شده است و سپس مدل اجزای محدود با استفاده از نتایج ازمایشگاهی، صحت سنجی شده است. به کمک نمونه صحت سنجی شده میتوان امکان مطالعه پارامتری گسترده روی رفتار باربری این گونه ستونها که انجام آن در شرایط ازمایشگاهی بسیار هزینه بر و وقت گیر میباشد را فراهم ساخت. تاکنون برای این تیپ از ستونها روش عددی برای تخمین ظرفیت باربری ارائه نشده است. در این مطالعه، همچنین برای بار نخست تلاش شده است تا ظرفیت باربری ستونهای یاد شده با استفاده از شبکه عصبی مصنوعی بدست آید. به دلیل کمبود امکانات ازمایشگاهی، از نمونهی صحت سنجی شده اجزای محدود برای تعیین پارامترهای تاثیر گذار بر ظرفیت باربری و همچنین تولید دادههای مورد نیاز به عنوان ورودی برای شبکه عصبی استفاده شد. پس از طراحی شبکه، نتایج حاصل از شبکه عصبی با چند نمونه ازمایشگاهی که در فرایند اموزش از انها استفاده نشده بود، راستی ازمایی گردید. در پایان علاوه بر روش شبکه عصبی، از روش تحلیلی رگرسیون چندگانه که با برازش از میان نتایج حاصل از مدلسازی عددی رابطهای بین متغیر-های ورودی و ظرفیت باربری نهایی ارائه میدهد، استفاده شد. نتایج حاصل از دو روش با دقت قابل قبولی بر این گواهی میدهند که این روشها میتوانند ظرفیت باربری این تیپ از ستونها را با دقت قابل قبولی تخمین بزنند که میتواند در آینده به ارائه روابط کاربردی جهت طراحی و استفاده در صنعت ساختمان منجر شود.
https://www.jsce.ir/article_57409_54b6103e8372250c3569efb0c463cd15.pdf
2019-08-23
157
176
10.22065/jsce.2018.101469.1351
ستون بتن مسلح
آرماتور مارپیچ
ظرفیت باربری
روش اجزای محدود
شبکه عصبی مصنوعی
مجتبی
لبیب زاده
labibzadeh_m@scu.ac.ir
1
گروه عمران - دانشکده ی مهندسی - دانشگاه شهید چمران اهواز
LEAD_AUTHOR
محمد
دادک
mohamaddadak@yahoo.com
2
دانشجوی کارشناسی ارشد سازه، گروه عمران دانشکده مهندسی، دانشگاه شهید چمران اهواز
AUTHOR
[1] Sakai K, Sheikh SA. (1989). What do we know about confinement in reinforced concrete columns? (A critical review of previous work and code provisions). ACI Struct J,86(2), (192–207).
1
[2] Teng JG, Lam L. (2004). Behavior and modeling of fiber reinforced polymer-confined concrete. StructEng j,130(11), (1713–23).
2
[3] lotfolahi yaghin, MA, Ziaion, M. (2012). Investigating the behavior of composite columns of two layers under the interaction of axial forces and bending anchor. Scientific and Research Modeling in Engineering, Journal of Engineering,
3
Semnan University: No. )31(, (15-23).
4
[4] Dian Jie Zhang ,Yi Shuo Ma ,Yuan Feng Wang.(2015).Compressive behavior of concrete filled steel tubular columns subjected to long-term loading. Structures, Volume), Pages (205-211).
5
[5] Mahmoud Belal, Hatem M.Mohamed, SherifA Morad. (2015). Behavior of reinforced concrete columns strengthened by steel jacket. HBRC Journal, Volume 11(Issue 2), Pages (201-212).
6
[6] A.M.Tarabia, H.F.Albakry. (2014) Strengthening of RC columns by steel angles and strips. Alexandria Engineering Journal, Volume 53(Issue 3), Pages (615-626).
7
[7] Teng JG, Yu T, Wong YL, Dong SL. (2007). Hybrid FRP-concrete-steel tubular columns: concept and behavior. Constr Build Mater,21(4), (846–54).
8
[8] Yu T, Zhang B, Teng JG. (2015). Unified cyclic stress–strain model for normal and high strength concrete confined with FRP. Eng Struct, 102, (189–201).
9
[9] Xie T, Ozbakkaloglu T. (2015). Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression. EngStruct,90, (158–71).
10
[10] Yin S. (2004). Researches and developments of alternative confinements for rectangular concrete columns (II). China Civil Eng J,37(10), (1–12).
11
[11] Weng C-C, Yin Y-L, Wang J-C, Liang C-Y. (2007). Axial compression and seismic behavior of precast rectangular SRC columns confined with 5-spirals. Process Steel Build Struct, 9(6), (12–9).
12
[12] Shih T-H, Chen C-C, Weng C-C, Yin SY-L, Wang J-C. (2013). Axial strength and ductility of square composite columns with two interlocking spirals. J Constr Steel Res,90, (184–92).
13
[13] Wu T-L, Ou Y-C, Yin SY-L, Wang J-C, Wang P-H, Ngo S-H. (2013). Behavior of oblong and rectangular bridge columns with conventional tie and multi-spiral transverse reinforcement under combined axial and flexural loads. J Chin Instit Eng, 36(8), (980–93).
14
[14] D.H. Jing, T. Yu, X.D. Liu. (2016). New configuration of transverse reinforcement for improved seismic resistance of rectangular RC columns: Concept and axial compressive behavior. Eng. Struct., 111, (383–393).
15
[15] Li Y, D.H. Jing, Cao SH. (2017). Axial compressive behavior of RC columns with high-strength MTS transverse reinforcement. Magazine of Concrete Research, 69(9), (436-452).
16
[16] Caroline Jorgensen, Ragnhild Grastveit, Julio Garzon-Roca, Ignacio Pay-Zaforteza, Jose Madam. (2013). Bearing capacity of steel-caged RC columns under combined bending and axial loads: Estimation based on Artificial Neural Networks. Engineering Structures, 56, (1262–1270).
17
[17] Alessio Cascardi, Francesco Micelli, Maria Antonietta Aiello. (2017). An Artificial Neural Networks model for the prediction of the compressive strength of FRP-confined concrete circular columns. Engineering Structures, 140, (199–208).
18
[18] M. Ahmadi, H. Nader pour, A. Kheyroddin. (2014). Utilization of artificial neural networks to prediction of the capacity of CCFT short columns subject to short term axial load. archives of civil and mechanical engineering, 14, (510–517).
19
[19] ACI Committee 318-11/318R-11. (2011). Building code requirements for reinforced concrete and commentary. Farmington Hills, MI, American Concrete Institute.
20
[20] ASCE, (1982). ASCE task committee on concrete and masonry structure. State of the Art Report on Finite Element Analysis of Reinforced Concrete, ASCE, New York.
21
[21] Wahalathantri, B.L, Thambiratnam, D.P, Chan, T.H.T, &Fawzia, S. (2011). A material model for flexural crack simulation in reinforced concrete elements using ABAQUS. In Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, Qld, pp. (260-264).
22
[22] X. Chang, Z. Ru, W. Zhou, Y. Zhang. (2013). Study on concrete-filled stainless-steel carbon steel tubular(CFSCT)stub columns under compression. Thin-Walled Struct, 63, (125–133).
23
[23] Zurada, J.M. (1992), “Introduction to Artificial Neural System”. West Publishing Co, St. Paul.
24
[24] Fausett, L.V. (1994), “Fundamentals of Neural Networks: Architecture, Algorithms and Applications”.
25
Prentice-Hall, Englewood Cliffs, NJ.
26
[25] Draper, N. R., and H. Smith. (1998). Applied Regression Analysis. Hoboken, NJ, Wiley-Interscience, pp (307–312).
27
ORIGINAL_ARTICLE
بررسی رفتار لوله های فولادی مدفون توزیع گاز در انواع خاک ها در اثر انتشار امواج لرزه ای
در مطالعات انجام شده، اثرات زلزله بر روی خطوط لوله مدفون به دو دسته اثر انتشار امواج (آثار دینامیکی) و اثر تغییر مکان پایدار زمین (آثار استاتیکی) تقسیم بندی میشوند. به عبارتی خطرات لرزه ای به دو دسته خطرات ناشی از انتشار امواج و تغییرمکان دائمی زمین (PGD) تقسیم می شوند. خطر تغییر مکان پایدار زمین (PGD) براساس کرنش ایجاد شده در لوله به علت لغزش، نشست زمین یا روانگرایی ناشی از گسترش جانبی مشخص میشود و خرابیهای ناشی از آن معمولاً در ناحیه محدودی از شکست زمین اما به شکل شدیدی اتفاق میافتد. مهمترین پارامتر برای تعیین سطح عملکرد و میزان خرابی خطوط لوله مدفون در هنگام وقوع زلزله، مقدار حداکثر کرنش میباشد. آئیننامه های شریانهای حیاتی نیز با بررسی مقدار حداکثر کرنش، به بررسی رفتار لرزه ای خطوط لوله مدفون پرداختهاند. در این مطالعه با استفاده از نرم افزار Abaqus روشی برای محاسبه حداکثر کرنش به وجود آمده در لوله های فولادی مدفون انتقال گاز در خاک بر حسب پارامترهای محتوی انرژی زلزله مانند شدت آریاس و شدت طیفی هاوزنر که با استفاده از شتاب نگاشت ها بدست می آید ارائه شده است. سپس به منظور ارائه یک رابطه واحد برای نمایش ارتباط بین حداکثر کرنش لوله های فولادی و پارامترهای محتوی انرژی زلزله (SI, AI, PGV*te/PGD) از پارامتر T/L ( نسبت پریود امواج برشی خاک به طول لوله) استفاده گردید و مقادیر a و b (ضرایب نمودارهای برازش داده شده) در هر بخش بر اساس این پارامتر بیان شده است
https://www.jsce.ir/article_57928_cfb9b61d65b8f9ff84ca1a6f69b1c6da.pdf
2019-08-23
177
190
10.22065/jsce.2018.99586.1338
شریان های حیاتی
حداکثر کرنش
لوله مدفون
امواج لرزه ای
انواع خاک
جمال
احمدی
j_ahmadi@iust.ac.ir
1
استادیار دانشکده مهندسی، دانشگاه زنجان
LEAD_AUTHOR
علی
گوهررخی
goharrokhi.ali@gmail.com
2
دانشکده مهندسی دانشگاه زنجان
AUTHOR
علی
نانکلی
ali_nankeli@yahoo.com
3
دانش آموخته کارشناسی ارشد مهندسی عمران/ سازه دانشگاه زنجان
AUTHOR
رضا
راستی اردکانی
r_rasti@sbu.ac.ir
4
دانشکده مهندسی عمران، دانشگاه شهید بهشتی
AUTHOR
[1] PoorArbabi,A. (1388) Buried pipelines and influence of earthquake. The third National Conference on Earthquake Engineering. (in Persian)
1
[2] Michael, J. (2000) Earthquake engineering handbook (Buried Pipelines), Hawaii University.
2
[3] Eguchi, R. (1991) Seismic hazard input for lifeline systems, Structural Safety 10, 193-198.
3
[4] O’Rourke, M., Ayala, G. (1993) Pipeline damage due to wave propagation, Journal of Geotechnical Engineering, 1490-1498.
4
[5] Jeon, S., O’Rourke, T. (2005) Northridge Earthquake Effects on Pipelines and Residential Buildings, Bulletin of the Seismological Society of America, 294-318.
5
[6] Abbasi, R. (1389) The relationship between spectral intensity with maximum strain of steel buried pipes, master thesis, University of Water and Power, Tehran. (in Persian)
6
[7] American Lifeline Alliances, (2005) Guidelines for design of buried steel pipes, American society of civil engineering, New York.
7
[8] Hassani, N., shadabfar, M. (2013) Effects of Crossing Angle on the Behavior of Buried Steel Pipelines Crossing Fault, Applied Mechanics and Materials, 630-636.
8
[9] IITK-GSDM, (2007) Guidelines for Seismic Design of Buried Pipelines, Indian institute of technology Kanpur.
9
988 نشریه علمی – پژوهشی مهندسی سازه و ساخت، دوره 6، شماره 2، سال 9318 ، صفحه 911 تا 910
10
[10] Alamation, E. Ghadamkhyr, K. Karimpour, B. (2013) Investigation Depth of Buried Pipeline on Stress, International Symposium on Advances in Science and Technology, 7th SASTech.
11
[11] Barenberg, M. (1988) Correlation of pipeline damage with ground motions, Journal of Geotechnical Engineering, 706-711.
12
[12] Eguchi, R. (1983) Seismic vulnerability models for underground pipes, Int. Symp. on Earthquake Behavior and Safety of Oil and Gas Storage Facilities, Buried Pipelines and Equipment; American Society of Mechanical Engineers, New York, 368-373.
13
[13] Porter, K. Scawthorn, C. Honegger, D. O’Rourke, T. Blackburn, F. (1991) Performance of water supply pipelines in liquefied soil, 4th U.S–Japan Workshop on Earthquake Disaster Prevention for Lifeline Systems Gaithersburg, NIST Special Publication 840, U.S. Dept. of Commerce, 3-17.
14
ORIGINAL_ARTICLE
بررسی تاثیر مقاومت و مشخصات نبشی بر رفتار اتصال فولادی پس کشیده با نبشی های فوقانی و تحتانی
در اثر زلزلهی سال 1994 نورتریج تعداد زیادی از ساختمانهای فولادی جوشی با سیستم قاب خمشی، در ناحیهی اتصالات تیر به ستون دچار شکست شدند. این خرابی در اتصالات قابهای خمشی که بر خلاف انتظار مهندسان بود، باعث شد تا نوع نگاه به اتصالات این قابها دچار تغییر شود. به همین دلیل مهندسان بر آن شدند تا اتصالاتی با شکلپذیری بیشتر و جزئیاتی جدید معرفی کنند. اتصال پس کشیده یکی از اتصالات نوین است که توسط محققان پیشنهاد شده است. اتصالات پس کشیده، شامل کابلهای پس کشیده با مقاومت بالا برای ایجاد خاصیت خود مرکزی و اتلاف کنندههای انرژی برای کنترل تغییرشکلهای پلاستیک هستند. در این مطالعه مدلسازی عددی اتصال پس کشیده با استفاده از نرم افزار اجزای محدود آباکوس انجام گرفته و ضمن کنترل صحت مدلسازی با نتایج آزمایشگاهی، 6 نمونه از اتصال مدلسازی شده و تاثیر برخی پارامترها شامل استفاده از فولاد پرمقاومت برای نبشی، استفاده از نبشی با ساق نامساوی، استفاده از سخت کننده برای نبشی و اثر نسبت طول آزمون به ضخامت نبشی (g/t ) بر رفتار اتصال تحت بارگذاری چرخه ای مورد بررسی قرار می گیرد. در محدوده مدلهای این مقاله نتایج نشان می دهد که استفاده از فولاد با مقاومت تسلیم بالاتر برای نبشی باعث افزایش جزئی ظرفیت خمشی و توان اتصال در تحمل بار جانبی می شود. همچنین نتایج نشان داد که استفاده از نبشی با طول ساق نامساوی تاثیری بر رفتار اتصال ندارد. استفاده از سخت کننده برای نبشی، باعث افزایش ظرفیت خمشی، توان اتصال در تحمل بار جانبی، اتلاف انرژی، سختی اولیه و سختی ماندگار اتصال می شود. همچنین کاهش نسبت طول آزمون به ضخامت نبشی (g/t ) از 4 به 6/3، باعث افزایش اتلاف انرژی اتصال می شود، بگونه ای که اتلاف انرژی در اتصال با نسبت (g/t ) کمتر، 17% بیشتر است.
https://www.jsce.ir/article_57411_ece876b8e7872a61c77dda5c4787afce.pdf
2019-08-23
191
208
10.22065/jsce.2018.97060.1311
اتصال پس کشیده
کابل پس کشیده
مدلسازی عددی
بارگذاری چرخه ای
نبشی
محسن
َعزیزی
mohsen.30vil@gmail.com
1
موسسه آموزش عالی جهاددانشگاه خوزستان، اهواز، خوزستان
AUTHOR
نوید
سیاه پلو
n_siahpolo@yahoo.com
2
استادیار ، موسسه آموزش عالی جهاد دانشگاهی خوزستان، ایران
LEAD_AUTHOR
[1] FEMA-350(2000) "Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, Prepared by SAC Joint Venture for the Federal Emergency Management Agency."Washington, DC.
1
[2] Ricles, J.M., Sause, R., Garlock, M. and C. Zhao. (2001).”Post-Tensioned Seismic Resistant Connections for Steel Frames,” Journal of Structural Engineering, ASCE, Vol. 127, No.2, pp 113-121.
2
[3] Ricles, J.M., Sause, R., Peng, S.W., and L.W. Lu. (2002).”Experimental Evaluation of Earthquake Resistant Post-Tensioned Steel Connections,” Journal of Structural Engineering, ASCE, Vol. 128, No. 7, pp. 850-859.
3
[4] Garlock M.M., Ricles J.M., Sause R. (2005). "Experimental Studies of Full-Scale Posttensioned Steel Connections", Journal of Structural Engineering, pp.438-448.
4
[5] Moradi, and M. Shahria Alam. (2015). "Finite-Element Simulation of Posttensioned Steel Connections with Bolted Angles under Cyclic Loading". This paper is part of the Journal of Structural Engineering, ASCE, ISSN 0733-9445/04015075(15)/$25.00.
5
[6] Gerami, Khatami. (May 2011). "Investigating the role of effective parameters in the behavior of steel post-tenshioned connections with upper and lower angles", 6th National Congress on Civil Engineering, Semnan University.
6
[7] Abedi Sarvestani, Rasti Ardakani, Shirvand. (2014). "Behavior of celf-centering post-tenshioned connections between beam and column includ angle with stiffner in steel moment resistant frame", 2nd International Congress on structure, Architecture and Urban Development, Tabriz University,iran.
7
[8]Sharbati, Hadian Fard, Lashkari.(2012). "Investigating the behavior of post-tensioned steel moment resisting frames connections, equipped with energy dissipation", 9th International Congress on Civil Engineering, Iran (Esfahan).
8
[9] Garlock M.M. (2002). "Full-Scale Testing ,Seismic Analysis,and Design of Post tensioned Seismic Resistant Connections for Steel Frames",PH.D. dissertation,Lehigh University.
9
[10] Gerami, Khatami. (2013). "Evaluation of the Seismic demand for post-tensioned moment resistant frame with Changes in Effective Parameters of post-tensioning", Scientific and Research Institute of Structural and Steel Research, Ninth, No 14.
10
[11] Rojas, P., Ricles, J.M. and Sause, R. (2005).“Seismic performance of posttensioned steel moment resisting frames with friction devices”, ASCE Journal of Structural Engineering, Vol. 131, No. 4, p. 529-540.
11
[12] Ricles, sause, wolski, c-y. Seo, and j. Iyama. (2006). "post tensioned moment connections with a bottom Flange friction device for seismic resistant selfcentering Steel Mrfs". 4th International Conference on Earthquake Engineering Taipei, Taiwan October 12-13.
12
[13] Ahmadi, Shadman, Amri.(2016). " Numerical Analysis of post-tensioned steel moment connections with bolted top-and-seat angle", Quarterly Journal of Structural Analysis - Earthquake Volume 13, No. 1.
13
[14]Abdollahzade, Hamidi, Asghari. (2016). " Numerical modeling of post-tensioned steel connection between beam and column under Cyclic loading", 4th. International Congress on Civil Engineering, Architecture and Urban Development, Shahid Beheshti University , Tehran , Iran, 27-29.
14
[15]Mohammadi, Inanlou. (2015). " Investigating the effective parameters in the behavior of post-tensioned cable connection in Progressive Failure", Tenth International Congress on Civil Engineering, Tabriz, Tabriz University of Civil Engineering.
15
[16]Pirmoz, A. and M.M. Liu. (2016). "Finite element modeling and capacity analysis of post-tensioned steel frames against progressive collapse", Engineering Structures. 126: p. 446-456.
16
[17]Abaqus Inc., Abaqus Analysis User's Manual, Version 6.16.
17
[18] Garlock M, Sause R, Ricles J. (2007). "Behavior and design of posttensioned steel frame systems", Journal of Structural Engineering, ASCE; 133(3): 389–99.
18
ORIGINAL_ARTICLE
بررسی عملکرد میراگر شکافدار و تیر با سطح مقطع کاهش یافته تحت بارگذاری چرخهای
یکی از نقدهای مطرح شده به اتصالات پیشنهادی بعد از زلزله های نورثریچ و کوبه، تخریب تیر بعد از وقوع زلزله، دشواری و مقرون به صرفه نبودن تعویض آن پس از زلزله میباشد. به همین منظور ایده استفاده از اتصالات همراه با میراگر شکافدار (SSD) که موجب استهلاک انرژی و تشکیل مفصل پلاستیک در مکانی غیر از المانهای اصلی سازهای میگردد، مطرح شد. در این مطالعه ابتدا مقایسهای بین اتصال SSD و اتصال تیر با سطح مقطع کاهش یافته (RBS) تحت بارگذاری چرخهای انجام شده است. در ادامه پیشنهاداتی به منظور بهبود عملکرد اتصال SSD با قابلیت استفاده در قابهای خمشی ویژه مطرح گردیده است، که این پیشنهادات شامل افزایش ضخامت و تعداد نوارها و همچنین کاهش ارتفاع میراگر بوده است. نتایج مطالعات نشان داد که اتصال SSD از لحاظ عملکردی تفاوت زیادی با اتصال RBS نداشته است و مطابق با ضوابط لرزهای اتصالات از پیش تایید شده، امکان استفاده از این اتصال در قابهای خمشی ویژه وجود دارد با این تفاوت که نیاز به تعویض آن پس از زلزله نمی باشد. همچنین نتایج نشان داد که افزایش ضخامت و کاهش ارتفاع میراگر بر خلاف افزایش تعداد نوارهای آن، بر روی عملکرد اتصال SSD تاثیر بیشتری داشته است. نتایج نشان می دهید اتصال SSD علاوه بر سهولت تعویض می تواند عملکردی مشابه اتصالات RBS را از خود بروز دهد.
https://www.jsce.ir/article_54366_17835f5f48f0780ac218238a0efcc64e.pdf
2019-08-23
209
222
10.22065/jsce.2017.98867.1329
اتصال همراه با میراگر شکافدار
اتصال تیر با سطح مقطع کاهش یافته
بارگذاری چرخه ای
قاب خمشی ویژه
ساختمان های فولادی
مسعود
ذبیحی سامانی
m.zabihisamani@gmail.com
1
استادیار، گروه مهندسی عمران، دانشکده فنی مهندسی، واحد پرند، دانشگاه آزاد اسلامی، پرند، ایران
LEAD_AUTHOR
محمدحسین
عابدابراهیمی
masoudzbh@yahoo.com
2
گروه مهندسی عمران، دانشکده فنی و مهندسی، واحد تهران غرب، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
پیام
طریقی
mzabihisamani@gmail.com
3
کارشناس ارشد مهندسی عمران سازه، دانشگاه سمنان
AUTHOR
[1] Wada, A., Huang, Y.H., Yamada, T., Ono, Y., Sugiyama, S., Baba, M. and Miyabara, T. (1997). Actual Size & Real Time Speed Tests for Hysteretic Steel Damper. In: Proceedings of Stessa, Vol. (97), pp. 778-785.
1
[2] Lee, M.-H., Oh, S.-H., Huh, C., Oh, Y.-S., Yoon, M.-H., Moon, T.-S. (2002). Ultimate Energy Absorption Capacity of Steel Plate Slit Dampers Subjected to Shear Force. Steel Structures, Vol. (2), pp. 71-79.
2
[3] Chan, R. and Albermani, F. (2008). Experimental Study of Steel Slit Damper for Passive Energy Dissipation. Engineering Structures, Vol. (30), pp. 1058–1066.
3
[4] Oh, S.-H., Kim, Y.-J. and Ryu, H.-S. (2008). Seismic Performance of Steel Structures with Slit Dampers. Engineering Structures, Vol. (31), pp. 1997-2008.
4
[5] Ghabraie, K., Chan, R., Huang, X. and Xie, Y.M. (2010). Shape Optimization of Metallic Yielding Devices for Passive Mitigation of Seismic Energy. Engineering Structures, Vol. (32), pp. 2258-2267.
5
[6] Khosnodian, F. and Kiani, M. (2010). Evaluation of SSD Connections in Special Steel Moment Frame. First National Conference on Structural-Earthquake-Geotechnics, Mazandaran, Babolsar.
6
[7] Karavasilis, T.L., Kerawala, S. and Hale, E. (2012). Hysteretic Model for Steel Energy Dissipation Devices & Evaluation of a Minimal-Damage Seismic Design Approach for Steel Buildings. Journal of Constructional Steel Research, Vol. (70), pp. 358–367.
7
[8] Tohidi Moghadam, V. and Saeed Monir, H. (2012). Evaluation of CSSD Connections under Seismic Loading. Second National Conference on Crisis Management, Tehran, Iran.
8
[9] Tohidi Moghadam, V. and Saeed Monir, H. (2012). Usage of CSSD in Steel Moment Frame. Third National Conference on Earthquake and Structures, Kerman, Iran.
9
[10] Zahraei, S. M. and Amin dehghan, A. (2012). Evaluation of New metal damper for Improving Seismic Behavier of Concentrated brace. Second National Conference on Crisis Management, Tehran, Iran.
10
[11] Zahraei, S. M. and Amin dehghan, A. (2012). Evaluation of Ductility and Absorb Energy of New Damper for Usage in Steel Braced Frame. Second National Conference on Crisis Management, Tehran, Iran.
11
[12] Koken, A. and Koroglu, M.A. (2012). Waste Rubber Damper Using on Steel Beam to Column Connection. International Journal of Arts & Sciences, Vol. (5), pp. 217–222.
12
[13] Moshtagh, A., Sheydaei, M.R. and Tohidi Moghadam, V. (2012). Usage of CSSD on the failure behavior of spatial double-layer Smooth and evaluation of progressive failure in them. Third National Conference on Earthquake and Structures, Kerman, Iran.
13
[14] Moshtagh, A., Tohidi Moghadam, V. and Saeed Monir, H. (2012). Study of progressive fracture on reinforced frames with duct slit damper. The 2nd National Conference on Earthquake-Geotechnic and Structures, Mazandaran.
14
[15] Saffari, H., Hedayat, A.A. and Poorsadeghi Nejad, M. (2013). Post-Northridge Connections With Slit Dampers to Enhance Strength & Ductility. Journal of Constructional Steel Research, Vol. (80), pp. 138–152.
15
صاحبامتیاز انجمن مهندسی سازه ایران
16
222 نشریه علمی – پژوهشی مهندسی سازه و ساخت، دوره 6، شماره 2، سال 9318 ، صفحه 201 تا 222
17
[16] Koken, A. and Koroglu. M.A. (2015). Experimental Study on Beam-to-Column Connections of Steel Frame Structures with Steel Slit Dampers. American Society of Civil Engineers, Vol. (29), pp. 1-11.
18
[17] Hedayat, A.A. (2015). Prediction of the Force Displacement Capacity Boundary of an Unbuckled Steel Slit Damper. Journal of Constructional Steel Research, Vol. (114), pp. 30-50.
19
[18] Farahi Shahri, S. and Mosavi, S.R. (2016). Development of slit dampers at the junction to the column by creating oval gaps. Modares Civil Engineering Jurnal, Vol. (16), pp. 93-104.
20
[19] Tagawa, H., Yamanishi, T., Takaki, A. and Chan, R. (2016). Cyclic Behavior of Seesaw Energy Dissipation System with Steel Slit Dampers. Journal of Constructional Steel Research, Vol. (117), pp. 24–34.
21
[20] Hwan Lee, Ch., Kim, J., Hyun Kim, D., Ryu, J., K. and Ju, Y. (2016). Numerical & Experimental Analysis of Combined Behavior of Sheartype Friction Damper & Non-uniform Strip Damper for Multi-level Seismic Protection. Engineering Structures, Vol. (114), pp. 75–92.
22
[21] Zabihi-Samani M and Amini F. (2015) A cuckoo search controller for seismic control of a benchmark tall building, Journal of Vibroengineering, Vol. 17(3), pp. 1382-1400.
23
[22] Mirghaderi, S.R., Torabian, Sh. and Imanpour, A. (2010). Seismic Performance of the Accordion-Web RBS Connection. J Constr Steel Res, Vol. (66), pp. 277-288.
24
[23] Aghajanian S, Baghi H, Amini and Zabihi-Samani Masoud. (2014). Optimal control of steel structures by improved particle swarm, International Journal of Steel Structure, , Vol. (14), pp. 223-30.
25
[25] Saleh, A., Mirghaderi, S.R. and Zahrai, S.M. (2016). Cyclic Testing of Tubular Web RBS Connections in Deep Beam. Jornal of Constructional Steel Research, Vol. (117), pp. 2214-226.
26
[26] Amini F, Zabihi-Samani M. (2014). A wavelet-based adaptive pole assignment method for structural control, Computre Aided Civil and Infrastructure Engineering, Vol. (29(6)), pp. 464-77.
27
[27] Moon, K.H., Kim, B.Ch., Hwang, S.H. and Han, S.W. (2016). Seismic Performance Evaluation of the Steel Moment Frames with Reduced Beam Section Connections with Bolted Web. The 5th International Symposium on Steel Structures, Seoul, Korea.
28
[28] Ghanooni-Bagha M, Shayanfar MA, Reza-Zadeh O, Zabihi-Samani M. (2017). The effect of materials on the reliability of reinforced concrete beams in normal and intense corrosions. Eksploatacja i Niezawodnosc – Maintenance and Reliability. Vol. (19(3)), pp. 393-402.
29
[29] Chih Chen, Ch. and Chou Lin, Ch. (2013). Seismic Performance of Steel Beam-to-Column Moment Connections with Tapered Beam Flanges. J Struct Eng, Vol. (48), pp. 588-601.
30
[30] Kulkani, S.A. and Vesmawala, G. (2014). Study of Steel Moment Connection with & Without Reduced Beam Section. Case Studies in Structural Engineering, Vol. (1), pp. 26-31.
31
[31] Zabihi-Samani Masoud and Ghanooni-Bagha Mohammad. (2017). A fuzzy logic controller for optimal structural control using MR dampers and particle swarm optimization. Journal of Vibroengineering, Vol. (19(3)), pp. 1901-1914.
32
[32] Saleh, A., Zahrai, S.M. and Mirghaderi, S.R. (2016) Exprimental Study on Innovative Tubular Web RBS Connections in Steel MRFs With Typical Shallow Beams. Structural Engineering & Mechanics, Vol. (57), pp. 785-808.
33
[33] ABAQUS (2010). Version9.10, Dassault Systemes, USA.
34
[34] FEMA 350 (2000). Recommended Seismic Design Criteria for New Steel Moment Frame Buildings. SAC Joint Venture.
35
[35] AISC 358 (2016). Prequalified Connections for Special & Intermediate Steel Moment Frams for Seismic Applications. Chicago.
36
[36] Code 10 (2012). Design and Construction Provisions for Structural Steel Buildings. Tehran: Toseh Iran.
37