@article { author = {Khazaei, Jahangir and Ghahramani, Ali}, title = {Comparison of Nail Axial Force, Deformation and Failure Surfaces in Sand and Clay Soils with Considering Corner Effect}, journal = {Journal of Structural and Construction Engineering}, volume = {8}, number = {4}, pages = {251-266}, year = {2021}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2019.191374.1889}, abstract = {Investigation and evaluation of damages to surrounding structures and also estimation of rupture levels by considering the amount of deformations and the amount of adjacent gates are important issues in the nailing system in urban areas. In this research, we tried to evaluate the axial force of the nails and the deformation in concave and convex dams; in sandy and clay soils. In this regard, numerical modeling is carried out using the Abaqus CAE software in the soil environment and parametric studies are carried out for different corner angles in the excavation under the service load. The results of this study indicate the effect of concave cortical deterioration and the damaging effect of the convex corners, which is in contrast to the concave hedge, in gondolas with sandy soil as well as clayey soil. The maximum axial force of the nails in the clay soil is less than that of the sandy soil, which decreases with the approach to the hollow corner. For maximum seating and horizontal displacement of the Goodwall wall, there is also a turning point between the angular angles of 130 ° to 150 °, with a good turnaround. By comparing and analyzing land surface levels and rupture levels, we will find that the maximum level of earth's summation in sandy soils will be the highest level of rupture, and in clay soils, ground-level landings in the location of critical burst surface changes It is noteworthy.}, keywords = {Corner effect,Nail Axial force,Sand soil,clay soil,Surface Settlement,Deformation of wall}, title_fa = {مقایسه نیروی محوری میخ، تغییرشکل وسطوح گسیختگی ناشی از گودبرداری درخاک های ماسه ای و رسی با درنظرگرفتن اثر گوشه}, abstract_fa = {بررسی و ارزیابی خرابی های وارده به سازه های اطراف گود و همچنین تخمین سطوح گسیختگی از طریق محاسبه مقدار تغییرشکل ها و مقدار نشست های مجاور گود از مسائل مهم در سیستم میخ گذاری در نواحی شهری به شمار می رود. در این تحقیق سعی شده است نیروی محوری میخ هاو تغییرشکل در گودهای مقعر و محدب؛ در خاک‌های ماسه ای و رسی ارزیابی شود. در این راستا مدل سازی عددی با استفاده از نرم‌ا‌فزار اجزاءمحدود Abaqus CAE در محیط خاک انجام شده و مطالعات پارامتریک برای زاویه های مختلف گوشه در گودبرداری تحت بار سرویس انجام می گیرد. نتایج این تحقیق، نشان گر تاثیر بازدارندگی گوشه‌های مقعر و تاثیر رو به تخریب گوشه های محدب که برعکس گود مقعر است در گودهایی با خاک ماسه ای و همچنین خاک رسی می‌باشد. ماکزیمم نیروی محوری میخ ها در خاک رسی کمتر از مقدار آن در خاک ماسه ای می باشد که با نزدیک شده به گوشه گود این مقدار کاهش می یابد. برای ماکزیمم نشست زمین و تغییرمکان افقی دیواره گود نیز تقریبا بین زوایای گوشه 130درجه تا 150درجه یک نقطه عطف وجود دارد که رفتار گود در آن کاملا تغییر خواهد نمود. با مقایسه و تحلیل نشست های سطح زمین و سطوح گسیختگی متوجه خواهیم شد که در ماکزیمم نشست سطح زمین در خاک ماسه ای، ماکزیمم سطوح گسیختگی رخ خواهد داد و در خاک رسی، نشست های سطح زمین در محل سطوح گسیختگی بحرانی دارای تغییرات قابل توجه می باشد.}, keywords_fa = {اثر گوشه,نیروی محوری میخ,خاک ماسه ای,خاک رسی,نشست سطح زمین,تغییرشکل دیواره}, url = {https://www.jsce.ir/article_92522.html}, eprint = {https://www.jsce.ir/article_92522_12e0fc23ed16c770b98fa4f4ef3f3bea.pdf} }