@article { author = {Hashemi, Elahesadat and Sarvghad Moghadam, Abdolreza and Khajeh Ahmad Attari, Nader and Hashemi, Seyed Amirhossein}, title = {Study the relative contribution of materials, reinforcement and concrete layers at different levels of cyclic deformation of masonry walls reinforced with shotcrete}, journal = {Journal of Structural and Construction Engineering}, volume = {5}, number = {2}, pages = {22-39}, year = {2018}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2017.69697.1016}, abstract = {In masonry buildings, walls are the main structural members that deal with lateral forces. The important point in seismic retrofitting projects is identify the most effective method of improving in various levels of displacement. Therefore, in this study based on laboratory results, 12 reinforced and unreinforced walls are subjected to cyclic load, and based on the optimum values for the calibration parameters modeling results with available experimental results, in first step, with change in the specification of reinforced and unreinforced walls, An estimate of the contribution of each component in the improvement of three displacement levels, displacement in the yield point, displacement corresponding to the maximum resistance and the final displacement is made. In the second step, with change in the thickness of the layer masonry materials in unreinforced brick walls and, with change in the thickness of the masonry, concrete, diameter rebar and the distance between the bars, in reinforced brick wall, analytical values are determined. Finally, in the third step the amounts proposed in first step is compared with the amounts extracted in step two that have been derived analytically. In unreinforced walls computing values for the share of masonry materials resistance in three levels of displacement is estimated at around 97%. In reinforced and unreinforced walls the most share in resistance in displacement of the yield point and displacement corresponding to the maximum resistance was for concrete. In the final displacement limit in one way reinforced walls, the most share is for resistance has for masonry material and in two way reinforced walls, the most share is for resistance has for reinforcement. Average computing error of the analytical values obtained from step two in the walls was, about 7.5% is obtained.}, keywords = {Unreinforced wall,Levels of deformation,Concrete layer,Network reinforcement,shotcrete}, title_fa = {مطالعه سهم تاثیر مصالح بنایی، شبکه آرماتور و لایه بتنی در سطوح مختلف تغییرشکل چرخه ای دیوار بنایی مسلح شده با شاتکریت}, abstract_fa = {در ساختمان های بنایی، اعضای سازه ای اصلی که با نیروهای جانبی مقابله می کنند، دیوارها هستند. از مسائل مهم در طرح بهسازی، شناسایی موثرترین روش بهبود در سطوح تغییرمکان های مختلف، می ّباشد. به همین منظور در این مطالعه با مبنا قراردادن نتایج آزمایشگاهی 12 نمونه دیوار غیرمسلح و تقویت شده تحت بار چرخه ای، و براساس مقادیر بهینه پارامترها برای بهترین کالیبراسیون نتایج مدلسازی با نتایج آزمایشگاهی موجود؛ در گام یک، با تغییر در مشخصات دیوارهای غیرمسلح و مسلح شده با بتن پاشی یکطرفه و دوطرفه، برای هریک از مصالح تشکیل دهنده دیوارهای مورد بررسی، مقداری به عنوان سهم آن مصالح در سه سطح تغییر مکانی: تغییرمکان تسلیم، تغییرمکان متناظر با مقاومت حداکثر و تغییرمکان نهایی ارائه شده است (مقادیر محاسباتی). در گام دوم با تغییر ضخامت لایه مصالح بنایی در دیوارهای آجری غیرمسلح و تغییر ضخامت لایه مصالح بنایی، لایه مصالح بتنی، قطر میلگردها و فاصله شبکه میلگردها، در دیوار آجری مسلح شده یکطرفه و دوطرفه، مقادیر تحلیلی حاصل از نرم افزار (مقادیر تحلیلی) استخراج شده است. درنهایت در گام سوم مقادیر محاسباتی پیشنهادشده در گام یک با مقادیر تحلیلی استخراج شده در گام دو مقایسه گشته است. در دیوارهای غیرمسلح، مقادیر محاسباتی برای سهم مقاومت مصالح بنایی از مقاومت کل دیوار در سه سطح تغییرمکانی مورد مطالعه در حدود 97% تخمین زده شده است. در دیوارهای مسلح شده با بتن پاشی یک طرفه و دو طرفه، در سطوح تغییرمکان تسلیم و تغییرمکان متناظر با مقاومت حداکثر، بیشترین سهم را بتن و در سطح تغییرمکان نهایی در دیوار با بتن پاشی یک طرفه بیشترین سهم از آن مصالح بنایی و در دیوار با بتن پاشی دو طرفه بیشترین سهم را در مقاومت دیوار، میلگردها دارند. میانگین خطای مقادیر محاسباتی نسبت به مقادیر تحلیلی حاصل از گام دو در دیوارهای مورد مطالعه در حدود 7/5% بدست آمده است.}, keywords_fa = {دیوار غیرمسلح,سطوح تغییرشکلی,لایه بتنی,شبکه آرماتور,شاتکریت}, url = {https://www.jsce.ir/article_46868.html}, eprint = {https://www.jsce.ir/article_46868_274ec034ace04f545e478422b0fbe78f.pdf} }