@article { author = {Haghighat, Azadeh and Heydarian, Neamat Allah and Sharbatdar, Mohammad Kazem}, title = {Evaluation of new composite rigid joint under cyclic loading and its effect on one-floor composite frame}, journal = {Journal of Structural and Construction Engineering}, volume = {4}, number = {2}, pages = {85-105}, year = {2017}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {10.22065/jsce.2017.71066.1025}, abstract = {In order to improve the performance of structure against lateral and gravity loads, new systems known as composite systems consisting of the reinforced concrete columns and steel beams (RCS) can be used and thereby the advantages of concrete beside steel are acquired. RCS joints can be implemented as either through-beam-type joint or through-column-type joint. In this paper, a concrete joint as standard reference joint and a proposed composite joint through-column‎ with new details were built and tested under cyclic loading. Then, using numerical analysis by finite element method, the behavior of composite joint under cyclic loading has been studied and the behavior and performance of proposed composite joint has been studied by comparing the results with that of concrete joint. The results showed that the joint composition in this way resulted in decreasing of the compressive and tensile damages of concrete and increasing in loading capacity, ductility, stiffness and energy absorption. General results of application of composite joint at the one floor-one span composite frame indicating that lateral loading capacity of frame was increased and the performance of frame was improved.}, keywords = {Composite system,Loading capacity,Ductility,stiffness,Energy absorption}, title_fa = {بررسی اتصال خمشی ترکیبی نوین تحت بارگذاری چرخه ای و اثر آن در قاب مرکب یک طبقه}, abstract_fa = {به منظور ارتقای عملکرد سازه در برابر بارهای جانبی و ثقلی، می­توان از سیستم­های نوینی تحت عنوان سیستم­های ترکیبی از جمله سیستم قاب خمشی شامل ستون بتن مسلح و تیر فولادی (RCS) استفاده کرد و بدین وسیله از مزایای بتن در کنار فولاد بهره برد. اتصالات RCS به دو صورت اتصال با تیر عبوری یا اتصال با ستون عبوری اجرا می شوند. در این مقاله یک اتصال بتنی به عنوان اتصال مرجع استاندارد و یک اتصال ترکیبی پیشنهادی با ستون عبوری با جزئیات جدید ساخته شدند و تحت بارگذاری چرخه ای مورد آزمایش قرار گرفتند. سپس با استفاده از تحلیل عددی به روش اجزای محدود رفتار و عملکرد اتصال ترکیبی پیشنهادی تحت بارگذاری چرخه ای مورد مطالعه قرار گرفته و با نتایج اتصال بتنی مقایسه شده است و همچنین اثر آن در یک قاب یک دهانه مورد بررسی قرار گرفته است. نتایج نشان می­دهند که مرکب­سازی اتصال به این شیوه منجر به کاهش خسارت­های فشاری و کششی بتن و افزایش ظرفیت باربری و شکل­پذیری و سختی و انرژی جذب شده اتصال گردیده است. نتایج کلی بررسی رفتار این اتصال ترکیبی، در یک قاب ترکیبی، حاکی از افزایش ظرفیت باربری جانبی قاب و بهبود عملکرد قاب ترکیبی در مقایسه با قاب بتنی بوده است.}, keywords_fa = {سیستم ترکیبی,ظرفیت باربری,شکل‌پذیری,سختی,انرژی جذب شده}, url = {https://www.jsce.ir/article_44833.html}, eprint = {https://www.jsce.ir/article_44833_45d391bcf07d46aab22bdbbaec9769a8.pdf} }